TPS65094

現行

適用於 Apollo Lake 處理器的可編程中輸入電壓範圍電源管理 IC (PMIC)

產品詳細資料

Processor supplier Intel/Altera Processor name Apollo Lake Regulated outputs (#) 12 Step-down DC/DC converter 3 Step-up DC/DC converter 0 LDO 4 Vin (min) (V) 5.6 Vin (max) (V) 21 Vout (min) (V) -0.3 Vout (max) (V) 3.575 Iout (max) (A) 21 Configurability Factory programmable, Software configurable Features Comm control, Dynamic voltage scaling, Enable, Enable pin, I2C control, Overcurrent protection, Power good, Power sequencing, Synchronous rectification, Thermal shutdown, UVLO fixed Rating Catalog Operating temperature range (°C) -40 to 85 Step-down DC/DC controller 3 Step-up DC/DC controller 0 Iq (typ) (mA) 0.3 Switching frequency (max) (kHz) 3100 Shutdown current (ISD) (typ) (µA) 65 Switching frequency (typ) (kHz) 2500 Product type Processor and FPGA
Processor supplier Intel/Altera Processor name Apollo Lake Regulated outputs (#) 12 Step-down DC/DC converter 3 Step-up DC/DC converter 0 LDO 4 Vin (min) (V) 5.6 Vin (max) (V) 21 Vout (min) (V) -0.3 Vout (max) (V) 3.575 Iout (max) (A) 21 Configurability Factory programmable, Software configurable Features Comm control, Dynamic voltage scaling, Enable, Enable pin, I2C control, Overcurrent protection, Power good, Power sequencing, Synchronous rectification, Thermal shutdown, UVLO fixed Rating Catalog Operating temperature range (°C) -40 to 85 Step-down DC/DC controller 3 Step-up DC/DC controller 0 Iq (typ) (mA) 0.3 Switching frequency (max) (kHz) 3100 Shutdown current (ISD) (typ) (µA) 65 Switching frequency (typ) (kHz) 2500 Product type Processor and FPGA
VQFN (RSK) 64 64 mm² 8 x 8
  • Wide VIN range from 5.6V to 21V
  • Three variable-output voltage synchronous Step-down controllers With D-CAP2™ topology
    • 5A for BUCK1 (VNN), 7A for BUCK6 (VDDQ), and 21A for BUCK2 (VCCGI) using external FETs for typical applications
    • I2C dynamic voltage scaling (DVS) control (0.5V to 1.45V in 10mV Steps) for BUCK1 and BUCK2
    • OTP-Programmable default output voltage for BUCK6 (VDDQ)
  • Three variable-output voltage synchronous Step-down converters with dcs-control topology and I2C DVS capabilities
    • VIN range from 4.5V to 5.5V
    • 3A of output current for BUCK3 (VCCRAM)
    • 2A of output current for BUCK4 (V1P8A) and BUCK5 (V1P24A) for typical applications
  • Three LDO regulators with adjustable output voltage
    • LDOA1: I2C-Selectable output voltage from 1.35V to 3.3V for up to 200mA of output current
    • LDOA2 and LDOA3: I2C-Selectable output voltage from 0.7V to 1.5V for up to 600mA of output current
  • VTT LDO for DDR memory termination
  • Three load switches with slew rate control
    • Up to 400mA of output current with voltage drop less than 1.5% of nominal input voltage
    • RDSON < 96mΩ at input voltage of 1.8V
  • I2C Interface (device address 0x5E) supports:
    • Standard mode (100kHz)
    • Fast mode (400kHz)
    • Fast mode plus (1MHz)
  • Wide VIN range from 5.6V to 21V
  • Three variable-output voltage synchronous Step-down controllers With D-CAP2™ topology
    • 5A for BUCK1 (VNN), 7A for BUCK6 (VDDQ), and 21A for BUCK2 (VCCGI) using external FETs for typical applications
    • I2C dynamic voltage scaling (DVS) control (0.5V to 1.45V in 10mV Steps) for BUCK1 and BUCK2
    • OTP-Programmable default output voltage for BUCK6 (VDDQ)
  • Three variable-output voltage synchronous Step-down converters with dcs-control topology and I2C DVS capabilities
    • VIN range from 4.5V to 5.5V
    • 3A of output current for BUCK3 (VCCRAM)
    • 2A of output current for BUCK4 (V1P8A) and BUCK5 (V1P24A) for typical applications
  • Three LDO regulators with adjustable output voltage
    • LDOA1: I2C-Selectable output voltage from 1.35V to 3.3V for up to 200mA of output current
    • LDOA2 and LDOA3: I2C-Selectable output voltage from 0.7V to 1.5V for up to 600mA of output current
  • VTT LDO for DDR memory termination
  • Three load switches with slew rate control
    • Up to 400mA of output current with voltage drop less than 1.5% of nominal input voltage
    • RDSON < 96mΩ at input voltage of 1.8V
  • I2C Interface (device address 0x5E) supports:
    • Standard mode (100kHz)
    • Fast mode (400kHz)
    • Fast mode plus (1MHz)

The TPS65094 device is a single-chip solution, power-management integrated chip (PMIC) designed specifically for the latest Intel™ processors targeted for tablets, ultrabooks, notebooks, industrial PCs, and Internet-of-Things (IOT) applications using 2S, 3S, or 4S Li-Ion battery packs (NVDC or non-NVDC power architectures), as well as wall-powered applications. The TPS65094 device is used for essential systems with low-voltage rails merged for the smallest footprint and lowest-cost system-power solution. The TPS65094 device provides the complete power solution based on the Intel Reference Designs. Six highly efficient step-down voltage regulators (VRs), a sink or source LDO (VTT), and a load switch are controlled by power-up sequence logic to provide the proper power rails, sequencing, and protection—including DDR3 and DDR4 memory power. The two regulators (BUCK1 and BUCK2) support dynamic voltage scaling (DVS) for maximum efficiency—including support for connected standby. The high-frequency VRs use small inductors and capacitors to achieve a small solution size. An I2C interface allows simple control by an embedded controller (EC) or by a system on chip (SoC).

The PMIC comes in an 8mm × 8mm single-row VQFN package with a thermal pad for good thermal dissipation and ease of board routing.

The TPS65094 device is a single-chip solution, power-management integrated chip (PMIC) designed specifically for the latest Intel™ processors targeted for tablets, ultrabooks, notebooks, industrial PCs, and Internet-of-Things (IOT) applications using 2S, 3S, or 4S Li-Ion battery packs (NVDC or non-NVDC power architectures), as well as wall-powered applications. The TPS65094 device is used for essential systems with low-voltage rails merged for the smallest footprint and lowest-cost system-power solution. The TPS65094 device provides the complete power solution based on the Intel Reference Designs. Six highly efficient step-down voltage regulators (VRs), a sink or source LDO (VTT), and a load switch are controlled by power-up sequence logic to provide the proper power rails, sequencing, and protection—including DDR3 and DDR4 memory power. The two regulators (BUCK1 and BUCK2) support dynamic voltage scaling (DVS) for maximum efficiency—including support for connected standby. The high-frequency VRs use small inductors and capacitors to achieve a small solution size. An I2C interface allows simple control by an embedded controller (EC) or by a system on chip (SoC).

The PMIC comes in an 8mm × 8mm single-row VQFN package with a thermal pad for good thermal dissipation and ease of board routing.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 5
類型 標題 日期
* Data sheet TPS65094 PMIC for Intel™ Apollo Lake Platform datasheet (Rev. E) PDF | HTML 2024年 10月 28日
EVM User's guide TPS65094x Evaluation Module User's Guide (Rev. A) 2017年 7月 26日
Application note TPS65094x Schematic Checklist, Layout Checklist, and ILIM Calculator tool (Rev. A) 2017年 1月 20日
User guide TPS65094x Design Guide 2015年 8月 29日
White paper Power management integrated buck controllers for distant point-of-load apps 2015年 8月 14日

設計與開發

電源供應解決方案

探索包括 TPS65094 的解決方案。TI 提供適用於 TI 與非 TI 之系統單晶片 (SoC)、處理器、微控制器、感測器或現場可編程邏輯閘陣列 (FPGA) 的電源供應解決方案。

開發板

TPS650941EVM-116 — TPS65094x 評估模組

The TPS650941EVM-116 demonstrates the integrated circuit TPS65094 from Texas Instruments.

The TPS65094 device is a single-chip solution, power-management IC designed specifically for the latest Intel™ processors targeted for tablets, ultrabooks, and notebooks with NVDC or non-NVDC power (...)

使用指南: PDF
開發模組 (EVM) 的 GUI

IPG-UI IPG-UI EVM GUI (Windows Installer)

The IPG-UI GUI can be used to configure multiple PMIC devices to evaluate the features and performance of those devices.  This GUI is built using web-based technologies and supports interacting with the EVM hardware using a USB2ANY adapter board. The USB2ANY Explorer is provided to allow (...)

支援產品和硬體

支援產品和硬體

產品
多通道 IC (PMIC)
TPS65020 具 3 個 DC/DC、3 個 LDO、I2C 介面和動態電壓負載的 6 通道電源管理 IC (PMIC) TPS65023 具 3DC/DC、3 LDO、I2C 介面和 DVS 的電源管理 IC (PMIC) TPS65023B 具 3DC/DC、3 LDO、I2C 介面和 DVS 的 6 通道電源管理 IC (PMIC) TPS65055 具 4 個低輸入電壓 LDO 的 2.25MHz 雙路降壓轉換器 TPS65084 適用 Braswell 處理器的可編程中輸入電壓範圍電源管理 IC (PMIC) TPS65086 適用 2S 和 3S 鋰電池供電設備或非電池供電設備的可配置多軌 PMIC TPS650861 具有 3 個轉換器、3 個控制器、4 個 LDO 和 3 個負載開關的使用者可編程電源管理 IC (PMIC) TPS65090 具切換模式充電器、3 個 DCDC、2 個 LDO 和 7 個負載開關的 6V 至 7V 電源管理 IC (PMIC) TPS65094 適用於 Apollo Lake 處理器的可編程中輸入電壓範圍電源管理 IC (PMIC) TPS65217 具 3 個 DC/DC、4 個 LDO、線性電池充電器和白光 LED 驅動器的電源管理 IC (PMIC) TPS652170 具有 3 個 DC/DC 轉換器、4 個 LDO、電池充電器和 LED 驅動器的使用者可編程電源管理 IC (PMIC) TPS65218 適用於 ARM Cortex-A8/A9 SoC 和 FPGA 的電源管理 IC (PMIC) TPS6521815 具有 6 個 DC/DC 轉換器、1 個 LDO 和 3 個負載開關的使用者可編程電源管理 IC (PMIC) TPS65218D0 適用於 ARM® Cortex™-A8/A9 SOC 和 FPGA 的整合電源管理 IC (PMIC) TPS657095 嵌入式攝影機模組 PMIC TPS65910 具 4 個 DC/DC、8 個 LDO 和採用 6x6mm QFN 系列的 RTC 之整合式電源管理 IC (PMIC) TPS65911 具 4 個 DC/DC、9 個 LDO 和 RTC 的整合式電源管理 IC (PMIC) TPS65912 具 4DC/DC、10 LDO、3 個 LED 輸出和 32kHz RC 振盪器的電源管理 IC (PMIC) TPS659128 適用處理器電源的 PMU
硬體開發
開發板
BOOSTXL-TPS650861 TPS650861 客戶編程 BoosterPack TPS65023BEVM-664 TPS65023B 評估模組 TPS65023EVM-205 TPS65023 評估模組 TPS650860EVM-116 TPS650860 評估模組 TPS65218EVM-100 TPS65218 評估模組
軟體
開發模組 (EVM) 的 GUI
IPG-UI IPG-UI EVM GUI
開發模組 (EVM) 的 GUI

IPG-UI-LINUX IPG-UI EVM GUI (Linux Installer)

The IPG-UI GUI can be used to configure multiple PMIC devices to evaluate the features and performance of those devices.  This GUI is built using web-based technologies and supports interacting with the EVM hardware using a USB2ANY adapter board. The USB2ANY Explorer is provided to allow (...)

支援產品和硬體

支援產品和硬體

產品
多通道 IC (PMIC)
TPS65023B 具 3DC/DC、3 LDO、I2C 介面和 DVS 的 6 通道電源管理 IC (PMIC) TPS65084 適用 Braswell 處理器的可編程中輸入電壓範圍電源管理 IC (PMIC) TPS65086 適用 2S 和 3S 鋰電池供電設備或非電池供電設備的可配置多軌 PMIC TPS650861 具有 3 個轉換器、3 個控制器、4 個 LDO 和 3 個負載開關的使用者可編程電源管理 IC (PMIC) TPS65094 適用於 Apollo Lake 處理器的可編程中輸入電壓範圍電源管理 IC (PMIC) TPS652170 具有 3 個 DC/DC 轉換器、4 個 LDO、電池充電器和 LED 驅動器的使用者可編程電源管理 IC (PMIC) TPS6521815 具有 6 個 DC/DC 轉換器、1 個 LDO 和 3 個負載開關的使用者可編程電源管理 IC (PMIC) TPS65218D0 適用於 ARM® Cortex™-A8/A9 SOC 和 FPGA 的整合電源管理 IC (PMIC) TPS657095 嵌入式攝影機模組 PMIC TPS659128 適用處理器電源的 PMU
硬體開發
開發板
TPS65023BEVM-664 TPS65023B 評估模組 TPS65023EVM-205 TPS65023 評估模組 TPS650860EVM-116 TPS650860 評估模組 TPS65218EVM-100 TPS65218 評估模組
軟體
開發模組 (EVM) 的 GUI
IPG-UI IPG-UI EVM GUI
開發模組 (EVM) 的 GUI

IPG-UI-OSX IPG-UI EVM GUI (OSX Installer)

The IPG-UI GUI can be used to configure multiple PMIC devices to evaluate the features and performance of those devices.  This GUI is built using web-based technologies and supports interacting with the EVM hardware using a USB2ANY adapter board. The USB2ANY Explorer is provided to allow (...)

支援產品和硬體

支援產品和硬體

產品
多通道 IC (PMIC)
TPS65023B 具 3DC/DC、3 LDO、I2C 介面和 DVS 的 6 通道電源管理 IC (PMIC) TPS65084 適用 Braswell 處理器的可編程中輸入電壓範圍電源管理 IC (PMIC) TPS65086 適用 2S 和 3S 鋰電池供電設備或非電池供電設備的可配置多軌 PMIC TPS650861 具有 3 個轉換器、3 個控制器、4 個 LDO 和 3 個負載開關的使用者可編程電源管理 IC (PMIC) TPS65094 適用於 Apollo Lake 處理器的可編程中輸入電壓範圍電源管理 IC (PMIC) TPS652170 具有 3 個 DC/DC 轉換器、4 個 LDO、電池充電器和 LED 驅動器的使用者可編程電源管理 IC (PMIC) TPS6521815 具有 6 個 DC/DC 轉換器、1 個 LDO 和 3 個負載開關的使用者可編程電源管理 IC (PMIC) TPS65218D0 適用於 ARM® Cortex™-A8/A9 SOC 和 FPGA 的整合電源管理 IC (PMIC) TPS657095 嵌入式攝影機模組 PMIC TPS659128 適用處理器電源的 PMU
硬體開發
開發板
TPS65023BEVM-664 TPS65023B 評估模組 TPS65023EVM-205 TPS65023 評估模組 TPS650860EVM-116 TPS650860 評估模組 TPS65218EVM-100 TPS65218 評估模組
軟體
開發模組 (EVM) 的 GUI
IPG-UI IPG-UI EVM GUI
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RSK) 64 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片