The TPSF12C1 is an active filter IC designed to reduce common-mode (CM) electromagnetic interference (EMI) in single-phase AC power systems.
The active EMI filter (AEF) configured with voltage sense and current inject (VSCI) uses a capacitive multiplier circuit to emulate the Y-capacitors in a conventional passive filter design. The device senses the high-frequency noise on each power line using a set of sense capacitors and injects noise-canceling currents back into the power lines using an injection capacitor. The effective active capacitance is set by the circuit gain and the injection capacitance. The AEF sensing and injection impedances use relatively low capacitance values with small component footprints. The device includes integrated filtering, compensation and protection circuitry, and an enable input.
The TPSF12C1 provides a very low impedance path for CM noise in the frequency range of interest for EMI measurement. Enabling up to 30 dB of CM noise reduction at the lower end of specified frequency ranges (for example, 150 kHz to 3 MHz) significantly reduces the size, weight and cost of the CM filter implementation.
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPSF12C1 Standalone, Active, EMI Filter for Common-mode Noise Mitigation in Single-Phase, AC, Power Systems datasheet (Rev. A) | PDF | HTML | 2023年 4月 28日 |
| EVM User's guide | TPSF12C1EVM-FILTER Active EMI Filter Evaluation Module for Single-Phase AC Power (Rev. A) | PDF | HTML | 2023年 7月 28日 | |
| EVM User's guide | TPSF12C1QEVM Active EMI Filter Evaluation Module for Single-Phase AC Systems (Rev. A) | PDF | HTML | 2023年 7月 28日 | |
| Certificate | TPSF12C1EVM-FILTER EU Declaration of Conformity (DoC) | 2023年 5月 18日 | ||
| White paper | 主動 EMI 濾波器 IC 如何降低單相和三相電源系統中的共模輻射，並提升功率密度 | PDF | HTML | 2023年 2月 14日 | |
| Functional safety information | TPSF12C1 Functional Safety FIT Rate, FMD, and Pin FMA | PDF | HTML | 2022年 11月 11日 | |
| Certificate | TPSF12C1QEVM EU RoHS Declaration of Conformity (DoC) | 2022年 11月 1日 |
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
Welcome to the TPSF12C1/-Q1 and TPSF12C3/-Q1 quickstart design tool. This standalone tool facilitates and assists the power-supply engineer with the design of an AEF circuit based on this family of common-mode AEF ICs. As such, the user can expeditiously arrive at an optimized design to meet (...)
This Mathcad file is offered to predict the stability of a voltage-sense current-inject AEF circuit, in particular with respect to TI's TPSF12C1/3/-Q1 family of common-mode (CM) AEF ICs, and to assist with component selection. The model is inclusive of most parasitic effects and can be used as a (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-23-THN (DYY) | 14 | Ultra Librarian |
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。
Welcome to the TPSF12C1/-Q1 and TPSF12C3/-Q1 quickstart design tool. This standalone tool facilitates and assists the power supply engineer with the design of an active EMI filter (AEF) circuit based on this family of common-mode AEF ICs. As such, the user can expeditiously arrive at an optimized design to meet the application requirements.
TPSF12C1/3 mathcad file
This Mathcad worksheet is offered to predict the stability of a voltage-sense, current-inject active EMI filter (AEF) circuit, in particular with respect to TI's TPSF12C1/3/-Q1 family of AEF ICs, and to assist with component selection. The model is inclusive of most parasitc effects and can be used as a quick check of the loop gain and insertion loss prior to simulation, bench measurement and fine tuning.
The worksheet functions for single- and 3-phase AC systems and facilitates two ways of entering the CM choke parameters:
1. Using an equivalent circuit model with (a) resistive and capacitive parasitics – suitable for ferrite-core chokes; (b) a ladder network of three parallel RL circuits -- suitable for nanocrystalline chokes
2. Using measured impedance data (magnitude and phase).
The worksheet is ideal for knowledge capture, unit-aware calculation reuse and for engineering collaboration amongst design, systems & application engineers.