JAJSFO1G September   2012  – June 2018 SN65DSI84

PRODUCTION DATA.  

  1. 1 特長
  2. 2 アプリケーション
  3. 3 概要
    1.     標準アプリケーション
  4. 4 改訂履歴
  5. 5 Pin Configuration and Functions
    1.     Pin Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 EDS Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Switching Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Clock Configurations and Multipliers
      2. 7.3.2 ULPS
      3. 7.3.3 LVDS Pattern Generation
    4. 7.4 Device Functional Modes
      1. 7.4.1 Reset Implementation
      2. 7.4.2 Initialization Sequence
      3. 7.4.3 LVDS Output Formats
      4. 7.4.4 DSI Lane Merging
      5. 7.4.5 DSI Pixel Stream Packets
      6. 7.4.6 DSI Video Transmission Specifications
      7. 7.4.7 Operating Modes
    5. 7.5 Programming
      1. 7.5.1 Local I2C Interface Overview
    6. 7.6 Register Maps
      1. 7.6.1 Control and Status Registers Overview
  8. 8 Application and Implementation
    1. 8.1 Application Information
      1. 8.1.1 Video Stop and Restart Sequence
      2. 8.1.2 Reverse LVDS Pin Order Option
      3. 8.1.3 IRQ Usage
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 Example Script
      3. 8.2.3 Application Curve
  9. 9 Power Supply Recommendations
    1. 9.1 VCC Power Supply
    2. 9.2 VCORE Power Supply
  10. 10Layout
    1. 10.1 Layout Guidelines
      1. 10.1.1 Package Specific
      2. 10.1.2 Differential Pairs
      3. 10.1.3 Ground
    2. 10.2 Layout Example
  11. 11デバイスおよびドキュメントのサポート
    1. 11.1 ドキュメントの更新通知を受け取る方法
    2. 11.2 コミュニティ・リソース
    3. 11.3 商標
    4. 11.4 静電気放電に関する注意事項
    5. 11.5 Glossary
  12. 12メカニカル、パッケージ、および注文情報

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

4 改訂履歴

Changes from F Revision (August 2015) to G Revision

  • Deleted figure Shutdown and Reset Timing Definition While VCC Is HighGo
  • Changed the paragraph following Figure 8Go
  • Changed Recommended Initialization Sequence To: Initialization SequenceGo
  • Changed Table 2Go
  • Changed item 3 in Video Stop and Restart Sequence From: Drive all DSI input lanes including DSI CLK lane to LP11. To: Drive all DSI data lanes to LP11, but keep the DSI CLK lanes in HS. Go

Changes from E Revision (October 2013) to F Revision

  • Added 「ピン構成および機能 」セクション、「ESD定格」表、「機能説明」セクション、「デバイスの機能モード」セクション、「アプリケーションと実装」セクション、「電源に関する推奨事項」セクション、「レイアウト」セクション、「デバイスおよびドキュメントのサポート」セクション、「メカニカル、パッケージ、および注文情報」セクションGo
  • Changed ULPS Itemized List, item 3 from "Wait for the PLL_LOCK bit (CSR 0x0A.7) to be set" to "Wait for a minimum of 3 ms."Go
  • Changed Initialization Sequence Description for Init seq7 from "Wait for the PLL_LOCK bit to be set (CSR 0x0A.7)" to "Wait for a minimum of 3 ms." Go
  • Changed Table 6 Address 0x0A, Bit 7 description from "PLL_LOCK" to "PLL_EN_STAT"Go
  • Changed Address 0x18, Bits 3, 2, 1, and 0 Descriptions in Table 8 for clarification.Go
  • Changed Item 1 of the Video STOP and Restart sequence from "Clear the PLL_EN bit to 0(CSR 0x0A.7)" to "Clear the PLL_EN bit to 0 (CSR 0x0D.0)" Go

Changes from D Revision (August 2013) to E Revision

  • Added rows for Bits 7, and 6:5 to Table 7 CSR Bit Field Definition – DSI RegistersGo

Changes from C Revision (December 2012) to D Revision

  • データシート全体を通してパッケージの記述を整合Go

Changes from B Revision (December 2012) to C Revision

    Changes from A Revision (December 2012) to B Revision

    • PGBAをPBGAに変更Go

    Changes from * Revision (August 2012) to A Revision

    • Changed the value of VOH From: 1.3 MIN To: 1.25 MINGo
    • Changed the ICC TYP value From: 125 To: 106 and MAX value From: 200 To: 150 Go
    • Added a TYP value of 7.7 to IULPSGo
    • Changed the IRST TYP value From: 0.05 To: 0.04 and MAX value From: 0.2 To: 0.06Go
    • changed the values of |VOD|Go
    • Changed the values of VOC(SS) for test conditions CSR 0x19.6 = 0 and, or CSR 0x19.4 = 0Go
    • Changed table note 2Go
    • Added table note 3Go
    • Changed the SWITCHING CHARACTERISTICS tableGo
    • Changed the description of CHA_LVDS_VOD_SWINGGo
    • Changed the description of CHB_LVDS_VOD_SWINGGo