SLVUBG0A July   2018  – March 2021 TPS62810-Q1 , TPS62810M , TPS62811-Q1 , TPS62811M , TPS62812-Q1 , TPS62812M , TPS62813-Q1 , TPS62813M

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Performance Specification
    2. 1.2 Modifications
      1. 1.2.1 Input and Output Capacitors
      2. 1.2.2 Adjustable-Output IC U1 Operation
      3. 1.2.3 Feedforward Capacitor
      4. 1.2.4 Soft-Start Time
      5. 1.2.5 Tracking
      6. 1.2.6 Switching Frequency and Control Loop Compensation
  3. 2Setup
    1. 2.1 Connector Descriptions
    2. 2.2 Hardware Setup
  4. 3TPS62810EVM-015 Test Results
  5. 4Board Layout
  6. 5Schematic
  7. 6Bill of Materials
  8. 7Revision History

2.2 Hardware Setup

To operate the EVM, set jumpers J3 and J4 to the desired positions using the Section 2.1. Connect the input supply to J1, between VIN and GND and connect the load to J2 between VOUT and GND.