SNLA473 November   2024 DP83867CS , DP83867E , DP83867IS , DP83869HM , DP83TC811S-Q1 , DP83TC812S-Q1 , DP83TC813S-Q1 , DP83TC814S-Q1 , DP83TC817S-Q1 , DP83TC818S-Q1 , DP83TG720S-Q1 , DP83TG721S-Q1

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Troubleshooting the MAC Interface - SGMII
    1. 1.1 Verify Bootstrap Configurations
      1. 1.1.1 SGMII Bootstrap Configuration for DP83TG720S-Q1
    2. 1.2 Read and Check Register Values
    3. 1.3 Auto-Negotiation
    4. 1.4 Throughput and Loopback Testing
      1. 1.4.1 Bidirectional Throughput Testing
      2. 1.4.2 RX and TX Throughput Testing
      3. 1.4.3 RX and TX Throughput Testing with Fixed Number of Packets
      4. 1.4.4 Loopback Testing
        1. 1.4.4.1 MII Loopback
        2. 1.4.4.2 Reverse Loopback
    5. 1.5 Check the Clock Signal
    6. 1.6 Measure the SGMII Eye
      1. 1.6.1 SGMII Eye Mask Requirements
    7. 1.7 SGMII Layout
  5. 2Summary
  6. 3References

1.4.4 Loopback Testing

Loopback tests can confirm any errors are a result of the SGMII connection. If errors occur during the MII loopback, then the issue is a result of the MII interface. If errors occur during reverse loopback then the issue is a result of the MDI interface.