TFT-LCD Single, 16V, Rail-to-Rail High Output Operational Amplifier

alarmNotifications Order now
LMH6640 is not recommended for new designs
This product continues to be available for existing customers. New designs should consider an alternate product.
open-in-new Compare alternates
Similar functionality to the compared device
LMH6642 ACTIVE Single Channel, Low Power, 130MHz, 75mA Rail-to-Rail Output Amplifier INA121 has lower offset and higher CMRR, with half the power consumption

Product details

Architecture Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4.5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 16 GBW (typ) (MHz) 190 BW at Acl (MHz) 190 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 170 Vn at flatband (typ) (nV√Hz) 15 Vn at 1 kHz (typ) (nV√Hz) 10 Iq per channel (typ) (mA) 4 Vos (offset voltage at 25°C) (max) (mV) 1 Rail-to-rail In to V-, Out Features C-Load Drive Rating Catalog Operating temperature range (°C) to CMRR (typ) (dB) 90 Input bias current (max) (pA) 2600000 Offset drift (typ) (µV/°C) 0 Iout (typ) (mA) 110 2nd harmonic (dBc) 71 3rd harmonic (dBc) 72 Frequency of harmonic distortion measurement (MHz) 5
Architecture Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4.5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 16 GBW (typ) (MHz) 190 BW at Acl (MHz) 190 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 170 Vn at flatband (typ) (nV√Hz) 15 Vn at 1 kHz (typ) (nV√Hz) 10 Iq per channel (typ) (mA) 4 Vos (offset voltage at 25°C) (max) (mV) 1 Rail-to-rail In to V-, Out Features C-Load Drive Rating Catalog Operating temperature range (°C) to CMRR (typ) (dB) 90 Input bias current (max) (pA) 2600000 Offset drift (typ) (µV/°C) 0 Iout (typ) (mA) 110 2nd harmonic (dBc) 71 3rd harmonic (dBc) 72 Frequency of harmonic distortion measurement (MHz) 5
SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8
  • (VS = 16V, RL= 2 kΩ to V+/2, 25°C, Typical Values Unless Specified)
  • Supply current (no load) 4 mA
  • Output resistance (closed loop 1 MHz) 0.35Ω
  • −3 dB BW (AV = 1) 190 MHz
  • Settling time (±0.1%, 2 VPP) 35 ns
  • Input common mode voltage −0.3V to 15.1V
  • Output voltage swing 100 mV from rails
  • Linear output current ±100 mA
  • Total harmonic distortion (2 VPP, 5 MHz) −64 dBc
  • Fully characterized for: 5V & 16V
  • No output phase reversal with CMVR exceeded
  • Differential gain (RL = 150Ω) 0.12%
  • Differential phase (RL = 150Ω) 0.12°

All trademarks are the property of their respective owners.

  • (VS = 16V, RL= 2 kΩ to V+/2, 25°C, Typical Values Unless Specified)
  • Supply current (no load) 4 mA
  • Output resistance (closed loop 1 MHz) 0.35Ω
  • −3 dB BW (AV = 1) 190 MHz
  • Settling time (±0.1%, 2 VPP) 35 ns
  • Input common mode voltage −0.3V to 15.1V
  • Output voltage swing 100 mV from rails
  • Linear output current ±100 mA
  • Total harmonic distortion (2 VPP, 5 MHz) −64 dBc
  • Fully characterized for: 5V & 16V
  • No output phase reversal with CMVR exceeded
  • Differential gain (RL = 150Ω) 0.12%
  • Differential phase (RL = 150Ω) 0.12°

All trademarks are the property of their respective owners.

The LMH6640 is a voltage feedback operational amplifier with a rail-to-rail output drive capability of 100 mA. Employing TI’s patented VIP10 process, the LMH6640 delivers a bandwidth of 190 MHz at a current consumption of only 4mA. An input common mode voltage range extending to 0.3V below the V− and to within 0.9V of V+, makes the LMH6640 a true single supply op-amp. The output voltage range extends to within 100 mV of either supply rail providing the user with a dynamic range that is especially desirable in low voltage applications.

The LMH6640 offers a slew rate of 170 V/µs resulting in a full power bandwidth of approximately 28 MHz with 5V single supply (2 VPP, −1 dB). Careful attention has been paid to ensure device stability under all operating voltages and modes. The result is a very well behaved frequency response characteristic for any gain setting including +1, and excellent specifications for driving video cables including total harmonic distortion of −64 dBc @ 5 MHz, differential gain of 0.12% and differential phase of 0.12°.

The LMH6640 is a voltage feedback operational amplifier with a rail-to-rail output drive capability of 100 mA. Employing TI’s patented VIP10 process, the LMH6640 delivers a bandwidth of 190 MHz at a current consumption of only 4mA. An input common mode voltage range extending to 0.3V below the V− and to within 0.9V of V+, makes the LMH6640 a true single supply op-amp. The output voltage range extends to within 100 mV of either supply rail providing the user with a dynamic range that is especially desirable in low voltage applications.

The LMH6640 offers a slew rate of 170 V/µs resulting in a full power bandwidth of approximately 28 MHz with 5V single supply (2 VPP, −1 dB). Careful attention has been paid to ensure device stability under all operating voltages and modes. The result is a very well behaved frequency response characteristic for any gain setting including +1, and excellent specifications for driving video cables including total harmonic distortion of −64 dBc @ 5 MHz, differential gain of 0.12% and differential phase of 0.12°.

Download

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 1
Type Title Date
* Data sheet LMH6640 TFT-LCD Single, 16V Rail-to-Rail High Output Operational Amplifier datasheet (Rev. B) 18 Mar 2013

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location