Product details

Function Nanotimer Iq (typ) (mA) 0.00003 Features Low-power timer, Programmable delay range, Watchdog function Rating Catalog Operating temperature range (°C) -40 to 105 Supply voltage (max) (V) 5 Supply voltage (min) (V) 1.8
Function Nanotimer Iq (typ) (mA) 0.00003 Features Low-power timer, Programmable delay range, Watchdog function Rating Catalog Operating temperature range (°C) -40 to 105 Supply voltage (max) (V) 5 Supply voltage (min) (V) 1.8
VSSOP (DGS) 10 14.7 mm² 3 x 4.9
  • Supply Voltage from1.8 V to 5.0 V
  • Current Consumption 30 nA (typical, at 2.5 V)
  • Watchdog Functionality
  • Reset Functionality
  • Selectable Timer Intervals 1 to 64 s
  • Supply Voltage from1.8 V to 5.0 V
  • Current Consumption 30 nA (typical, at 2.5 V)
  • Watchdog Functionality
  • Reset Functionality
  • Selectable Timer Intervals 1 to 64 s

The TPL5000 is a long-term timer IC optimized for low-power applications. The TPL5000 can replace a micro controller–s (µC) internal timer, allowing the µC to stay in low-power sleep mode instead of running a timer, providing a total power consumption reduction of 60 to 80%. The TPL5000 is designed for use in interrupt-driven applications and provides selectable timing from 1 second to 64 seconds. Some standards (such as EN50271) require implementation of a watchdog function for safety. The TPL5000 realizes this watchdog function without consuming additional power. The TPL5000 can also monitor a battery management IC via a power-good digital input and reset the microcontroller, if necessary. The device is packaged in a 10-pin VSSOP package.

The TPL5000 is a long-term timer IC optimized for low-power applications. The TPL5000 can replace a micro controller–s (µC) internal timer, allowing the µC to stay in low-power sleep mode instead of running a timer, providing a total power consumption reduction of 60 to 80%. The TPL5000 is designed for use in interrupt-driven applications and provides selectable timing from 1 second to 64 seconds. Some standards (such as EN50271) require implementation of a watchdog function for safety. The TPL5000 realizes this watchdog function without consuming additional power. The TPL5000 can also monitor a battery management IC via a power-good digital input and reset the microcontroller, if necessary. The device is packaged in a 10-pin VSSOP package.

Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Same functionality with different pin-out to the compared device
TPL5010 ACTIVE Nano-powered system timer with watchdog functionality & manual reset Wider programmable delay range (100 ms to 7200 s), ultra-low power system timer

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 2
Type Title Date
* Data sheet TPL5000 Nano-Power Programmable Timer with Watchdog Functionality datasheet (Rev. B) PDF | HTML 21 Aug 2014
EVM User's guide TPL5000EVM User's Guide 23 Apr 2013

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPL5000EVM — Evaluation Module for Nano Power Programmable Timer with Watchdog Functionality

The Texas Instruments TPL5000EVM evaluation module (EVM) allows a designer to configure the delay timers of the TPL5000 and measure its very low current consumption. Moreover the TPL5000EVM is ready to be connected to the Launchpads of MSP430, Stellaris and C2000 in order to test its watchdog and (...)

User guide: PDF
Not available on TI.com
Simulation model

TPL5000 IBIS Model

SNAM153.ZIP (67 KB) - IBIS Model
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Package Pins CAD symbols, footprints & 3D models
VSSOP (DGS) 10 Ultra Librarian

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos