LM25149
Controlador CC/CC reductor síncrono de 42 V con IQ ultrabaja y filtro EMI activo integrado
LM25149
- Functional Safety-Capable
- Two integrated EMI mitigation mechanisms
- Active EMI Filter for enhanced EMI performance at lower frequencies
- Selectable dual random spread spectrum (DRSS) for enhanced EMI performance across low and high-frequency bands
- EMI reduced by an average of 25 dBµV
- Reduces the external differential-mode input filter size by 50% and lowers systems cost
- Optimized for CISPR 32 Class B requirements
- Versatile synchronous buck DC/DC controller
- Wide input voltage range of 3.5 V to 42 V
- 1% accurate, fixed 3.3-V, 5-V, 12-V, or adjustable output from 0.8 V to 36 V
- 150°C maximum junction temperature
- Shutdown mode current: 2.3 µA
- No-load sleep current: 9.5 µA
- Stackable up to two phases
- Advanced dropout with frequency foldback
- Switching frequency from 100 kHz to 2.2 MHz
- SYNC in and SYNC out capability
- Inherent protection features for robust design
- Internal hiccup-mode overcurrent protection
- ENABLE and PGOOD functions
- VCC, VDDA, and gate-drive UVLO protection
- Internal or external loop compensation
- Thermal shutdown protection with hysteresis
- Create a custom design using the LM25149 with WEBENCH Power Designer
The LM25149 is a 42-V, ultra-low IQ synchronous buck DC/DC controller for high-current, single-output applications. The controller uses a peak current-mode control architecture for easy loop compensation, fast transient response, and excellent load and line regulation. The LM25149 can be set up in interleaved dual-phase mode with accurate current sharing for high-current applications. It can operate with VIN as low as 3.5 V, at nearly 100% duty cycle if needed.
The LM25149 has two unique EMI reduction features: active EMI filter and dual random spread spectrum (DRSS). The active EMI filter senses any noise or ripple voltage on the DC input bus and injects an out-of-phase cancellation signal to reduce the disturbance. DRSS combines low-frequency triangular and high-frequency randomized modulations to mitigate EMI across lower and higher frequency bands, respectively. This hybrid technique aligns with the multiple resolution bandwidth (RBW) settings specified in industry-standard EMC tests.
Additional features of the LM25149 include 150°C maximum junction temperature operation, user-selectable diode emulation for lower current consumption at light-load conditions, open-drain power-good flag for fault reporting and output monitoring, precision enable input, monotonic start-up into prebiased load, integrated VCC bias supply regulator and bootstrap diode, internal 3-ms soft-start time, and thermal shutdown protection with automatic recovery.
The LM25149 controller comes in a 3.5-mm × 5.5-mm thermally enhanced, 24-pin VQFN package with an exposed pad to aid in thermal dissapation.
Productos similares que pueden interesarle
Pin por pin con la misma funcionalidad que el dispositivo comparado
Documentación técnica
Tipo | Título | Fecha | ||
---|---|---|---|---|
* | Data sheet | LM25149 42-V Synchronous Buck DC/DC Controller with Ultra-Low IQ and Integrated Active EMI Filter datasheet (Rev. B) | PDF | HTML | 15 dic 2021 |
White paper | Time-Saving and Cost-Effective Innovations for EMI Reduction (Rev. A) | PDF | HTML | 28 nov 2023 | |
Application note | How to Implement a Simple Constant Current Regulation Scheme to a PCM Based Buck | PDF | HTML | 16 ago 2023 | |
User guide | LM25149-Q1 EVM User's Guide (Rev. A) | PDF | HTML | 29 abr 2022 | |
Functional safety information | LM25149 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA | PDF | HTML | 07 dic 2021 | |
E-book | An Engineer’s Guide to Low EMI in DC/DC Regulators | 21 abr 2021 | ||
Technical article | How to reduce EMI and shrink power-supply size with an integrated active EMI filte | PDF | HTML | 05 abr 2021 |
Diseño y desarrollo
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
LM25149-Q1EVM-2100 — Módulo de evaluación de controlador CC/CC reductor síncrono de 5.5 V a 36 V y IQ baja LM25149-Q1
LM5149-Q1EVM-400 — Módulo de evaluación LM5149-Q1, 72 V, baja IQ, controlador CC/CC síncrono reductor con filtro EMI ac
El módulo de evaluación (EVM) de alta densidad LM5149‑Q1EVM‑400 está diseñado para mostrar el rendimiento del controlador reductor de CC/CC síncrono de alto rendimiento para automoción LM5149‑Q1. El EVM funciona en un amplio rango de tensión de entrada de 15 V a 72 V para brindar una salida fija de (...)
Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
---|---|---|
VQFN (RGY) | 24 | Ultra Librarian |
Pedidos y calidad
- RoHS
- REACH
- Marcado del dispositivo
- Acabado de plomo/material de la bola
- Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
- Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
- Contenido del material
- Resumen de calificaciones
- Monitoreo continuo de confiabilidad
- Lugar de fabricación
- Lugar de ensamblaje
Soporte y capacitación
Foros de TI E2E™ con asistencia técnica de los ingenieros de TI
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.