Inicio Gestión de la energía Interruptores de potencia Controladores de diodo ideal/ORing

LM74700-Q1

ACTIVO

Controlador de diodo ideal con IQ de 3.2 V a 65 V y 80 uA para automoción

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
LM74700D-Q1 ACTIVO Controlador automotriz de diodo ideal de 3.2 V a 70 V, con 80 uA de protección de batería inversa Newer device with higher absolute maximum rating and SOIC package

Detalles del producto

Vin (min) (V) 3.2 Vin (max) (V) 65 Number of channels 1 Features Automotive load dump compatibility, Enable, Linear control, Reverse current blocking, Reverse polarity protection Iq (typ) (mA) 0.08 Iq (max) (mA) 0.13 TI functional safety category Functional Safety-Capable FET External single FET IGate source (typ) (µA) 11000 IGate sink (typ) (mA) 2370 IGate pulsed (typ) (A) 2.3 Operating temperature range (°C) -40 to 125 VSense reverse (typ) (mV) -11 Design support EVM Rating Automotive Imax (A) 250 Shutdown current (ISD) (mA) (A) 0.001 Device type Ideal diode controller Product type Ideal diode controller
Vin (min) (V) 3.2 Vin (max) (V) 65 Number of channels 1 Features Automotive load dump compatibility, Enable, Linear control, Reverse current blocking, Reverse polarity protection Iq (typ) (mA) 0.08 Iq (max) (mA) 0.13 TI functional safety category Functional Safety-Capable FET External single FET IGate source (typ) (µA) 11000 IGate sink (typ) (mA) 2370 IGate pulsed (typ) (A) 2.3 Operating temperature range (°C) -40 to 125 VSense reverse (typ) (mV) -11 Design support EVM Rating Automotive Imax (A) 250 Shutdown current (ISD) (mA) (A) 0.001 Device type Ideal diode controller Product type Ideal diode controller
SOT-23 (DBV) 6 8.12 mm² 2.9 x 2.8 SOT-23-THN (DDF) 8 8.12 mm² 2.9 x 2.8
  • AEC-Q100 qualified with the following results
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Functional Safety-Capable
  • 3.2-V to 65-V input range (3.9-V start up)
  • –65-V reverse voltage rating
  • Charge pump for external N-Channel MOSFET
  • 20-mV ANODE to CATHODE forward voltage drop regulation
  • Enable pin feature
  • 1-µA shutdown current (EN=Low)
  • 80-µA operating quiescent current (EN=High)
  • 2.3-A peak gate turnoff current
  • Fast response to reverse current blocking: < 0.75 µs
  • Meets automotive ISO7637 transient requirements with a suitable TVS Diode
  • Available in 6-pin and 8-pin SOT-23 Package 2.90 mm × 1.60 mm
  • AEC-Q100 qualified with the following results
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Functional Safety-Capable
  • 3.2-V to 65-V input range (3.9-V start up)
  • –65-V reverse voltage rating
  • Charge pump for external N-Channel MOSFET
  • 20-mV ANODE to CATHODE forward voltage drop regulation
  • Enable pin feature
  • 1-µA shutdown current (EN=Low)
  • 80-µA operating quiescent current (EN=High)
  • 2.3-A peak gate turnoff current
  • Fast response to reverse current blocking: < 0.75 µs
  • Meets automotive ISO7637 transient requirements with a suitable TVS Diode
  • Available in 6-pin and 8-pin SOT-23 Package 2.90 mm × 1.60 mm

The LM74700-Q1 is an automotive AEC Q100 qualified ideal diode controller which operates in conjunction with an external N-channel MOSFET as an ideal diode rectifier for low loss reverse polarity protection with a 20-mV forward voltage drop. The wide supply input range of 3.2 V to 65 V allows control of many popular DC bus voltages such as 12-V, 24-V and 48-V automotive battery systems. The 3.2-V input voltage support is particularly well suited for severe cold crank requirements in automotive systems. The device can withstand and protect the loads from negative supply voltages down to –65 V.

The device controls the GATE of the MOSFET to regulate the forward voltage drop at 20 mV. The regulation scheme enables graceful turn off of the MOSFET during a reverse current event and ensures zero DC reverse current flow. Fast response (< 0.75 µs) to Reverse Current Blocking makes the device suitable for systems with output voltage holdup requirements during ISO7637 pulse testing as well as power fail and input micro-short conditions.

The LM74700-Q1 controller provides a charge pump gate drive for an external N-channel MOSFET. The high voltage rating of LM74700-Q1 helps to simplify the system designs for automotive ISO7637 protection. With the enable pin low, the controller is off and draws approximately 1 µA of current.

The LM74700-Q1 is an automotive AEC Q100 qualified ideal diode controller which operates in conjunction with an external N-channel MOSFET as an ideal diode rectifier for low loss reverse polarity protection with a 20-mV forward voltage drop. The wide supply input range of 3.2 V to 65 V allows control of many popular DC bus voltages such as 12-V, 24-V and 48-V automotive battery systems. The 3.2-V input voltage support is particularly well suited for severe cold crank requirements in automotive systems. The device can withstand and protect the loads from negative supply voltages down to –65 V.

The device controls the GATE of the MOSFET to regulate the forward voltage drop at 20 mV. The regulation scheme enables graceful turn off of the MOSFET during a reverse current event and ensures zero DC reverse current flow. Fast response (< 0.75 µs) to Reverse Current Blocking makes the device suitable for systems with output voltage holdup requirements during ISO7637 pulse testing as well as power fail and input micro-short conditions.

The LM74700-Q1 controller provides a charge pump gate drive for an external N-channel MOSFET. The high voltage rating of LM74700-Q1 helps to simplify the system designs for automotive ISO7637 protection. With the enable pin low, the controller is off and draws approximately 1 µA of current.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
LM74500-Q1 ACTIVO Controlador de protección contra polaridad inversa 3.2-V to 65-V, 80-µA IQ automotive reverse polarity protection controller
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
LM74700-EP ACTIVO Controlador de diodo ideal mejorado con baja IQ Enhanced product version, -55 C to 125 C operation
LM74701-Q1 ACTIVO Controlador de diodo ideal de protección contra batería inversa de 3.2 V a 65 V con pinza VDS integr Next generation input TVSless ideal diode controller improving system size and cost
LM74720-Q1 ACTIVO Controlador de diodo ideal de baja IQ con rectificación activa y protección contra descarga de carga Next generation ideal diode controller with ultra-low on IQ.
Funcionalidad similar a la del dispositivo comparado
NUEVO LM74703-Q1 ACTIVO Controlador de diodo ideal para automoción con buena salida FET Similar device with FET good output
NUEVO LM74704-Q1 ACTIVO Controlador de diodo ideal para automoción con salida FET de drenaje abierto Similar device with FET good output
LM7480-Q1 ACTIVO Controlador de diodo ideal de 3 V a 65 V que impulsa NFET consecutivos para automoción 3-V to 65-V, automotive ideal diode controller driving back to back NFETs supporting reverse polarity, reverse current and over-voltage protection

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 14
Tipo Título Fecha
* Data sheet LM74700-Q1 Low IQ Reverse Battery Protection Ideal Diode Controller datasheet (Rev. G) PDF | HTML 21 dic 2020
Application brief Full-Featured Automotive Side Mirror PDF | HTML 15 mar 2024
Analog Design Journal Redundant supply topologies for automotive applications using ideal diode controllers PDF | HTML 14 feb 2024
Analog Design Journal Multibattery management in medical ultrasound systems (Rev. B) PDF | HTML 08 jun 2023
Application brief Implementation of Test Pulses in Digital Output Modules PDF | HTML 04 mar 2022
Application note Basics of Ideal Diodes (Rev. B) PDF | HTML 05 oct 2021
Certificate Automotive PPAP Documentation 18 jun 2021
EVM User's guide LM74700DDFEVM: Evaluation Module for LM74700-Q1 PDF | HTML 10 dic 2020
Technical article Meet airline restrictions with power-path control for dual batteries PDF | HTML 21 jul 2020
Functional safety information Streamlining Functional Safety Certification in Automotive and Industrial 09 jun 2020
Functional safety information LM74700-Q1 Functional Safety FIT Rate and Failure Mode Distribution 16 dic 2019
E-book 11 Ways to Protect Your Power Path 03 jul 2019
Application note Basics of Power Switches (Rev. A) PDF | HTML 26 abr 2019
User guide LM74700 Evaluation Module (Rev. A) 11 feb 2019

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LM74700DDFEVM — Módulo de evaluación LM74700-Q1 de controlador de diodo ideal de 3.2 V a 65 V e IQ de 80 μA para aut

The LM74700DDFEVM helps designers evaluate the operation and performance of the LM74700-Q1 3.2-V to 65-V, 80-μA IQ automotive ideal diode controller (DDF package). This evaluation module demonstrates how an N-channel power MOSFET can emulate a very-low forward voltage diode with low IQ and (...)

Guía del usuario: PDF | HTML
Placa de evaluación

LM74700EVM — Módulo de evaluación LM74700

The LM74700EVM helps designers evaluate the operation and performance of the LM74700-Q1 smart diode controller. This evaluation module demonstrates how an N-channel power MOSFET can emulate a very-low forward voltage diode with low IQ and low-leakage current flowing through the IC.
Guía del usuario: PDF
Modelo de simulación

LM74700-Q1 PSpice Transient Model

SNOM667.ZIP (64 KB) - PSpice Model
Modelo de simulación

LM74700-Q1 TINA-TI Transient Model

SNOM691.TSC (149 KB) - TINA-TI Spice Model
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)

Muchos diseños de referencia de TI incluyen LM74700-Q1

Utilice nuestra herramienta de selección de diseños de referencia para revisar e identificar los diseños que mejor se adaptan a su aplicación y parámetros.

Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOT-23 (DBV) 6 Ultra Librarian
SOT-23-THN (DDF) 8 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos