Inicio Gestión de la energía Reguladores lineales y de baja salida (LDO)
Inicio
Gestión de la energía
Reguladores lineales y de baja salida (LDO)

TLV1117LV

ACTIVO

Regulador de tensión de caída baja de 1 A

Haga su pedido ahora
Hoja de datos

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TLV757P ACTIVO Regulador de tensión de caída baja, alta precisión, baja IQ, 1 A, con activación Higher accuracy and PSRR in a smaller package with similar thermal performance

TLV1117LV

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Output options Fixed Output Iout (max) (A) 1 Vin (max) (V) 5.5 Vin (min) (V) 2 Vout (max) (V) 3.3 Vout (min) (V) 1.2 Fixed output options (V) 1.2, 1.5, 1.8, 2.5, 2.8, 3, 3.3 Rating Catalog Noise (µVrms) 60 PSRR at 100 KHz (dB) 50 Iq (typ) (mA) 0.05 Thermal resistance θJA (°C/W) 63 Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Accuracy (%) 1.3 Dropout voltage (Vdo) (typ) (mV) 570 Operating temperature range (°C) -40 to 125
Output options Fixed Output Iout (max) (A) 1 Vin (max) (V) 5.5 Vin (min) (V) 2 Vout (max) (V) 3.3 Vout (min) (V) 1.2 Fixed output options (V) 1.2, 1.5, 1.8, 2.5, 2.8, 3, 3.3 Rating Catalog Noise (µVrms) 60 PSRR at 100 KHz (dB) 50 Iq (typ) (mA) 0.05 Thermal resistance θJA (°C/W) 63 Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Accuracy (%) 1.3 Dropout voltage (Vdo) (typ) (mV) 570 Operating temperature range (°C) -40 to 125
SOT-223 (DCY) 4 45.5 mm² 6.5 x 7
  • Typical accuracy: 1.5%
  • Low IQ: 100 µA (maximum)
    • 500 times lower than standard 1117 devices
  • VIN: 2 V to 5.5 V
    • Absolute maximum VIN: 6 V
  • Stable With 0-mA output current
  • Low dropout: 455 mV at 1 A for VOUT = 3.3 V
  • High PSRR: 65 dB at 1 kHz
  • Minimum specified current limit: 1.1 A
  • Stable with cost-effective ceramic capacitors:
    • With 0-Ω ESR
  • Temperature range: –40°C to +125°C
  • Thermal shutdown and overcurrent protection
  • For drop-in replacement with upgraded functionality, see the TLV761
  • Available in a SOT-223 package
    • See the Mechanical, Packaging, and Orderable Information section at the end of this document for a complete list of available voltage options.
  • Typical accuracy: 1.5%
  • Low IQ: 100 µA (maximum)
    • 500 times lower than standard 1117 devices
  • VIN: 2 V to 5.5 V
    • Absolute maximum VIN: 6 V
  • Stable With 0-mA output current
  • Low dropout: 455 mV at 1 A for VOUT = 3.3 V
  • High PSRR: 65 dB at 1 kHz
  • Minimum specified current limit: 1.1 A
  • Stable with cost-effective ceramic capacitors:
    • With 0-Ω ESR
  • Temperature range: –40°C to +125°C
  • Thermal shutdown and overcurrent protection
  • For drop-in replacement with upgraded functionality, see the TLV761
  • Available in a SOT-223 package
    • See the Mechanical, Packaging, and Orderable Information section at the end of this document for a complete list of available voltage options.

The TLV1117LV low-dropout (LDO) linear regulator is a low input voltage version of the popular TLV1117 voltage regulator.

The TLV1117LV is an extremely low-power device that consumes 500 times lower quiescent current than traditional 1117 voltage regulators, making the device designed for applications that mandate very low standby current. The TLV1117LV LDO is also stable with 0 mA of load current; there is no minimum load requirement, making the device a good choice for applications where the regulator must power very small loads during standby in addition to large currents on the order of 1 A during normal operation. The TLV1117LV offers excellent line and load transient performance, resulting in very small magnitude undershoots and overshoots of output voltage when the load current requirement changes from less than 1 mA to more than 500 mA.

A precision band-gap and error amplifier provides 1.5% accuracy. A very high power-supply rejection ratio (PSRR) enables use of the device for post-regulation after a switching regulator. Other valuable features include low output noise and low-dropout voltage.

The device is internally compensated to be stable with 0-Ω equivalent series resistance (ESR) capacitors. These key advantages enable the use of cost-effective, small-size ceramic capacitors. Cost-effective capacitors that have higher bias voltages and temperature derating can also be used if desired.

The TLV1117LV is available in a SOT-223 package.

The TLV1117LV low-dropout (LDO) linear regulator is a low input voltage version of the popular TLV1117 voltage regulator.

The TLV1117LV is an extremely low-power device that consumes 500 times lower quiescent current than traditional 1117 voltage regulators, making the device designed for applications that mandate very low standby current. The TLV1117LV LDO is also stable with 0 mA of load current; there is no minimum load requirement, making the device a good choice for applications where the regulator must power very small loads during standby in addition to large currents on the order of 1 A during normal operation. The TLV1117LV offers excellent line and load transient performance, resulting in very small magnitude undershoots and overshoots of output voltage when the load current requirement changes from less than 1 mA to more than 500 mA.

A precision band-gap and error amplifier provides 1.5% accuracy. A very high power-supply rejection ratio (PSRR) enables use of the device for post-regulation after a switching regulator. Other valuable features include low output noise and low-dropout voltage.

The device is internally compensated to be stable with 0-Ω equivalent series resistance (ESR) capacitors. These key advantages enable the use of cost-effective, small-size ceramic capacitors. Cost-effective capacitors that have higher bias voltages and temperature derating can also be used if desired.

The TLV1117LV is available in a SOT-223 package.
filter Buscar otro/a Reguladores lineales y de baja salida (LDO)
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 7
Tipo Título Fecha
* Data sheet TLV1117LV 1-A, Positive Fixed-Voltage, Low-Dropout Regulator datasheet (Rev. C) PDF | HTML 18 ene 2023
Application note LDO Noise Demystified (Rev. B) PDF | HTML 18 ago 2020
Application note A Topical Index of TI LDO Application Notes (Rev. F) 27 jun 2019
Selection guide Low Dropout Regulators Quick Reference Guide (Rev. P) 21 mar 2018
Application note LDO PSRR Measurement Simplified (Rev. A) PDF | HTML 09 ago 2017
More literature The Differences Between TLV1117LV and TLV1117 02 ago 2011
EVM User's guide TLV1117LVxxEVM-714 Evaluation Module User's Guide (Rev. B) 26 may 2011

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

BOOSTXL-CC1120-90 — BoosterPack para aplicaciones de 902 MHz a 928 MHz

The CC1120-CC1190 BoosterPack™ module is designed to use with the MSP-EXP430F5529 and MSP-EXP430G2553 LauchPad™ development kits and to work as a stand-alone module by using SmartRF Studio application software.  The module is equipped with an integrated PCB trace antenna which (...)

No disponible en TI.com
Placa de evaluación

BOOSTXL-CC1125 — BoosterPack para aplicaciones de 868/915 MHz CC1125

The CC1125 BoosterPack™ module is designed to use with the MSP-EXP430F5529 and MSP-EXP430G2553 LauchPad development kits and to work as a stand-alone module by using SmartRF Studio application software.  The module is equipped with an integrated PCB trace antenna which operates in (...)

No disponible en TI.com
Placa de evaluación

DRV8305-Q1EVM — Módulo de evaluación del controlador de puerta de motor trifásico para automoción DRV8305-Q1

The DRV8305-Q1EVM evaluation module (EVM) is a 4.4 V to 45 V, 25 A, 3-phase motor drive and control system based on the DRV8305-Q1 automotive motor gate driver, TMS320F28027 motor control microcontroller, and CSD18540Q5B NexFET™ power MOSFET. The EVM allows for simple evaluation of the (...)

Guía del usuario: PDF
No disponible en TI.com
Placa de evaluación

TLV1117LV33EVM-714 — Módulo de evaluación TLV1117LV para regulador lineal LDO de 1 A y tensión fija

The TLV1117LV33EVM-714 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TLV1117LVxx device, which is a 1-A, positive fixed-voltage low-dropout (LDO) linear regulator.
Guía del usuario: PDF
No disponible en TI.com
Modelo de simulación

TLV1117LV12 PSpice Transient Model

SLVM168.ZIP (32 KB) - PSpice Model
Descargar
Modelo de simulación

TLV1117LV12 TINA-TI Reference Design

SBVM523.TSC (58 KB) - TINA-TI Reference Design
Descargar
Modelo de simulación

TLV1117LV12 TINA-TI Transient Spice Model

SBVM524.ZIP (6 KB) - TINA-TI Spice Model
Descargar
Modelo de simulación

TLV1117LV15 PSpice Transient Model

SBVM175.ZIP (32 KB) - PSpice Model
Descargar
Modelo de simulación

TLV1117LV18 PSpice Transient Model

SLVM169.ZIP (32 KB) - PSpice Model
Descargar
Modelo de simulación

TLV1117LV25 PSpice Transient Model

SBVM129.ZIP (32 KB) - PSpice Model
Descargar
Modelo de simulación

TLV1117LV28 PSpice Transient Model

SBVM177.ZIP (32 KB) - PSpice Model
Descargar
Modelo de simulación

TLV1117LV30 PSpice Transient Model

SBVM176.ZIP (32 KB) - PSpice Model
Descargar
Modelo de simulación

TLV1117LV33 PSpice Transient Model

SLVM170.ZIP (32 KB) - PSpice Model
Descargar
Diseños de referencia

TIDA-01606 — Diseño de referencia de convertidor (tipo T) y PFC de 10 kW, bidireccional, trifásico y de tres nive

This verified reference design provides an overview on how to implement a three-level three-phase SiC based DC:AC T-type inverter stage. Higher switching frequency of 50KHz reduces the size of magnetics for the filter design and enables higher power density. The use of SiC MOSFETs with switching (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-010090 — Diseño de referencia de comprobador de celdas de batería de control digital de 4 canales y 50 A

El diseño de referencia ilustra un método para controlar la corriente y la tensión de una etapa de potencia de convertidor buck bidireccional con un microcontrolador (MCU) C2000™ en tiempo real y un convertidor analógico a digital (ADC) de precisión ADS8588S. Con este diseño se consigue un error (...)
Design guide: PDF
Diseños de referencia

TIDA-010065 — Diseño de referencia de módulo de entrada analógica basado en convertidor de CC/CC aislado de alta e

Este diseño de referencia es una arquitectura simplificada para generar una fuente de alimentación aislada para amplificadores aislados para medir tensiones y corrientes aisladas. Un convertidor CC/CC totalmente integrado con aislamiento reforzado que funciona a partir de una entrada de 5 V con (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-010025 — Diseño de referencia de inversor trifásico para unidades de 200 VCA a 480 VCA con controladores de p

This reference design realizes a reinforced isolated three-phase inverter subsystem using isolated IGBT gate drivers and isolated current/voltage sensors. The UCC23513 gate driver used has a 6-pin wide body package with optical LED emulated inputs which enables its use as pin-to-pin replacement to (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-010008 — Diseño de referencia basado en TVS de abrazadera plana para protección contra transitorios para apli

This reference design features multiple approaches for  protecting AC or DC analog input, DC analog output, AC or DC binary input, digital output with a high side or low side driver, LCD bias supply, USB interfaces (power and data) and onboard power supplies with 24, 12 or 5V input used in (...)
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00380 — Diseño de referencia de CAN a puerta de enlace Wi-Fi

TIDA-00380 CAN to Wi-Fi gateway reference design shows how to add Wi-Fi connectivity to a CAN network. The design provides a simple way for you to gain access to the CAN bus traffic via a web page. This connection can be used for diagnostics or to add the capability to control the CAN bus. (...)
Design guide: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOT-223 (DCY) 4 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos