TLV803
Supervisor de tensión de 3 pines (IC de reinicio), con reinicio activo-bajo y de drenaje abierto
TLV803
- 3-Pin SOT23 Package
- Supply Current: 9 µA (Typical)
- Precision Supply Voltage Monitor: 2.5 V, 3 V, 3.3 V, 5 V
- Power-On Reset Generator with Fixed Delay Time of 200 ms
- Pin-for-Pin Compatible with MAX803
- Temperature Range: –40°C to +125°C
- Open-Drain, RESET Output
The TLV8x3 family of supervisory circuits provides circuit initialization and timing supervision, primarily for DSPs and processor-based systems.
The TLV803, TLV853, and TLV863 are functionally equivalent. The TLV853 and TLV863 provide an alternate pinout of the TLV803. The newer TLV803E device is a pin-to-pin alternative to all of these 3.
During power on, RESET asserts when the supply voltage (VDD) exceeds 1.1 V. Thereafter, the supervisory circuit monitors VDD and keeps RESET active as long as VDD remains below the threshold voltage VIT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time (td(typ) = 200 ms) starts after VDD exceeds the threshold voltage, VIT. When the supply voltage drops below the VIT threshold voltage, the output is active (low) again. All the devices in this family have a fixed sense-threshold voltage (VIT) set by an internal voltage divider.
The product spectrum is designed for supply voltages of 2.5 V, 3 V, 3.3 V, and 5 V. These devices are available in a 3-pin SOT-23 package. The TLV803 devices are characterized for operation over a temperature range of –40°C to +125°C.
Documentación técnica
Diseño y desarrollo
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
ADS114S08EVM — Módulo de evaluación de ADS114S08
The ADS114S08 evaluation module (EVM) is a platform for evaluation of the ADS114S08 analog-to-digital converter (ADC). The ADS114S08 is a 16-bit, 4-kSPS, 12-channel, low-power delta-sigma ADC for sensor measurement and process control applications. The ADS114S08 also includes a highly-accurate (...)
ADS122C04EVM — Módulo de evaluación de ADS122C04
The ADS122C04 evaluation module (EVM) is a platform for evaluating the ADS122C04 analog-to-digital converter (ADC). The ADS122C04 is a 24-bit, 2-kSPS, 4-channel, low-power delta-sigma ADC with an I2C interface for sensor measurement and process control applications. The ADS122C04 also includes an (...)
TLV803SEVM-019 — Módulo de evaluación TLV803 para supervisor de tensión de 3 pines con reinicio activo-bajo de drenaj
TIDCBC1 — TIDA-00447 Firmware
Productos y hardware compatibles
Productos
Supervisor & reset ICs
TIDCC99 — TIDM-TM4C123XSUB1GHZ Project Source Software
Productos y hardware compatibles
Productos
Supervisor & reset ICs
TLV803M Unencrypted PSpice Transient Model Package (Rev. A)
TLV803R Unencrypted PSpice Transient Model Package (Rev. A)
TLV803S Unencrypted PSpice Transient Model Package (Rev. A)
TLV803Z Unencrypted PSpice Transient Model Package (Rev. A)
Driving Stepper Motor with High Performance MCU Assembly Drawing (from DRV8833)
AM437x Discrete Power Reference Design Bill of Materials (BOM)
Driving a Stepper Motor with High Performance MCU CAD Files (from DRV8833)
Driving a Stepper Motor with High Performance MCU CAD FIles (from EK-TM4C123GXL)
Driving a Stepper Motor with High Performance MCU PCB (from DRV8833)
PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI
TIDEP0040 — Diseño de referencia de hardware/software basado en OMAPL-138 de radio definida por software (SDR)
TIDA-00447 — Diseño de referencia de la unidad de motor CC sin escobillas de sensor doble de 24 V, 100 W/30 W
TIDA-01568 — Diseño de referencia de secuenciación de potencia de 5 carriles y 12 mm x 12 mm para procesadores de
TIDEP0020 — Diseño de referencia de potencia discreta AM437x
TIDM-TM4C123XSUB1GHZ — Diseño de referencia de nodo de IoT compatible con menos de 1 GHz en microcontrolador de alto rendim
TIDM-TM4C123STEPPERMOTOR — Diseño de referencia de conducción de motor paso a paso con MCU de alto rendimiento
TIDA-00641 — Diseño de referencia del controlador doble de micropasos de alta resolución
TIDEP0038 — Diseño de referencia de hardware/software basado en OMAPL-138 de análisis de visión
Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
---|---|---|
SOT-23 (DBZ) | 3 | Ultra Librarian |
Pedidos y calidad
- RoHS
- REACH
- Marcado del dispositivo
- Acabado de plomo/material de la bola
- Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
- Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
- Contenido del material
- Resumen de calificaciones
- Monitoreo continuo de confiabilidad
- Lugar de fabricación
- Lugar de ensamblaje
Soporte y capacitación
Foros de TI E2E™ con asistencia técnica de los ingenieros de TI
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.