TPS929160-Q1
Controlador OLED y LED de lado alto de 40 V y 16 canales para automoción
TPS929160-Q1
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, TA
- 16-channel precision high-side current output:
- Device supply voltage 4.5V to 40V
- LED supply voltage 4V to 36V
- Up to 100mA channel current set by resistor
- 2-bit global, 6-bit independent current setting
- High-current accuracy < ±5% at 5mA to 100mA
- Low voltage drop 750mV at 100mA
- 12-bit independent PWM dimming
- Programmable PWM frequency up to 20kHz
- Phase-shift PWM dimming
- Ultra low quiescent in sleep mode supported by EN and NSTB pin
- Linear and exponential dimming method
- FlexWire™ control interface
- Up to 1MHz clock frequency
- Maximum 16 devices on one FlexWire bus
- Up to 24 bytes data transaction in one frame
- 5V LDO output to supply CAN transceiver
- Diagnostic and protection:
- Programmable FAIL-SAFE state
- LED open-circuit detection
- LED short-circuit detection
- Single-LED short-circuit diagnostic
- Programmable low-supply detection
- Open-drain ERR for fault indication
- Watchdog and CRC for FlexWire interface
- 8-bit ADC for pin voltage measurement
- Overtemperature protection
With the increasing demand for animation in automotive lighting, LEDs must be controlled independently. Therefore, LED drivers with digital interfaces are essential to effectively drive pixel-controlled lighting applications. In exterior lighting, multiple lamp functions are typically located on different PCB boards with off-board wires connected to each other. It is difficult for a traditional single-ended interface to meet the strict EMC requirements. By using an industrial-standard CAN physical layer, the UART-based FlexWire interface of the TPS929160-Q1 easily accomplishes long distance off-board communication without impacting EMC.
The TPS929160-Q1 is a 16-channel, 40V high-side LED driver that controls the 8-bit output current and 12-bit PWM duty cycles. The device meets multiple regulation requirements with LED open-circuit, short-to-ground, and single LED short-circuit diagnostics. A configurable watchdog also automatically sets FAIL-SAFE states when the MCU connection is lost, and, with programmable EEPROM, TPS929160-Q1 can flexibly be set for different application scenarios.
Productos similares que pueden interesarle
Pin por pin con la misma funcionalidad que el dispositivo comparado
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
Documentación técnica
Tipo | Título | Fecha | ||
---|---|---|---|---|
* | Data sheet | TPS929160-Q1 16-Channel, Automotive, 40V, High-Side (O)LED Driver With FlexWire™ Interface datasheet (Rev. A) | PDF | HTML | 10 abr 2024 |
User guide | TPS929xxx-Q1 Sample Code User's Guide | PDF | HTML | 10 abr 2023 |
Diseño y desarrollo
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
TPS929160EVM — Módulo de evaluación TPS929160-Q1 para controlador LED automotriz de 16 canales
SLVRBM1 — TPS929240-Q1 TPS929160-Q1 EEPROM Configuration Tool
Productos y hardware compatibles
Productos
Controladores para LED en automóviles
PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI
Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
---|---|---|
HTSSOP (DCP) | 38 | Ultra Librarian |
Pedidos y calidad
- RoHS
- REACH
- Marcado del dispositivo
- Acabado de plomo/material de la bola
- Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
- Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
- Contenido del material
- Resumen de calificaciones
- Monitoreo continuo de confiabilidad
- Lugar de fabricación
- Lugar de ensamblaje
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
Soporte y capacitación
Foros de TI E2E™ con asistencia técnica de los ingenieros de TI
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.