パッケージ情報
| パッケージ | ピン数 VQFN (RGR) | 20 |
| 動作温度範囲 (℃) -40 to 85 |
| パッケージ数量 | キャリア 250 | SMALL T&R |
BQ24735 の特徴
- Adapter and Battery Provide Power to System
Together to Support Intel® CPU Turbo Boost
Mode - SMBus Host-Controlled NMOS-NMOS
Synchronous Buck Converter With Programmable
615-, 750-, and 885-kHz Switching Frequencies - Automatic N-Channel MOSFET Selection of
System Power Source From Adapter or Battery
Driven by Internal Charge Pumps - Enhanced Safety Features for Overvoltage
Protection, Overcurrent Protection, Battery,
Inductor and MOSFET Short-Circuit Protection - Programmable Input Current, Charge Voltage,
Charge Current Limits- ±0.5% Charge Voltage Accuracy up to 19.2 V
- ±3% Charge Current Accuracy up to 8.128 A
- ±3% Input Current Accuracy up to 8.064 A
- ±2% 20× Adapter Current or Charge Current
Amplifier Output Accuracy
- Programmable Battery Depletion Threshold, and
Battery LEARN Function - Programmable Adapter Detection and Indicator
- Integrated Loop Compensation and Soft Start
- Real-Time System Control on ILIM Pin to Limit
Charge Current - AC Adapter Operating Range: 4.5 V to 24 V
- 5-µA Off-State Battery Discharge Current
- 0.65 mA (0.8 mA Max) Adapter Standby
Quiescent Current
BQ24735 に関する概要
The bq24735 device is a high-efficiency, synchronous battery charger, offering low component count for space-constrained, multichemistry battery charging applications. The bq24735 device supports turbo boost by allowing battery discharge energy to the system when system power demand is temporarily higher than the adapter maximum power level so the adapter will not crash.
The bq24735 device uses two charge pumps to separately drive N-channel MOSFETs (ACFET, RBFET, and BATFET) for automatic system power source selection.
SMBus controlled input current, charge current, and charge voltage digital-to-analog converters (DACs) allow for very high-regulation accuracies that can be easily programmed by the system power management microcontroller.
The bq24735 device uses an internal input current register or an external ILIM pin to throttle down PWM modulation to reduce the charge current. The bq24735 device charges 1-, 2-, 3-, or 4-series Li+ cells.