TPD1E10B09
- Provides system-level ESD protection for I/O interfaces up to ±9 V
- IEC 61000-4-2 level 4:
- ±20 kV (air-gap discharge)
- ±20 kV (contact discharge)
- IEC 61000-4-5 surge protection:
- 4.5 a (8/20 µs)
- I/O capacitance 10 pf (typical)
- R DYN 0.5 ω (typical)
- DC breakdown voltage ±9.5 V (minimum)
- Ultra low leakage current 100 nA (maximum)
- 13-V clamping voltage (maximum at I PP = 1 A)
- Industrial temperature range: –40°C to 125°C
- Space-saving 0402 footprint (1 mm × 0.6 mm × 0.5 mm)
The TPD1E10B09 device is a single-channel electrostatic discharge (ESD) transient voltage suppression (TVS) diode in a small 0402 package. This ESD protection diode offers ±20 kV IEC 61000-4-2 (level 4) contact and air-gap ESD protection. The back-to-back TVS diode configuration allows for bipolar or bidirectional signal support. The 10-pF line capacitance is suitable for a wide range of applications supporting data rates up to 500 Mbps. The 0402 package is an industry standard and is convenient for component placement in space-constrained applications.
Typical applications of this ESD protection TVS diode are circuit protection for audio lines (microphone, earphone, and speaker phone), SD interfacing, keypad or other buttons, V BUS pin and ID pin of USB ports, and general-purpose I/O ports. This ESD clamp is good for the protection of end equipment like eBooks, tablets, remote controllers, wearables, set-top boxes, and electronic point of sale equipment.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPD1E10B09 Single-Channel ESD Protection Device in 0402 Package datasheet (Rev. E) | PDF | HTML | 2023/09/14 |
| User guide | Reading and Understanding an ESD Protection Data Sheet (Rev. A) | PDF | HTML | 2023/09/19 | |
| Selection guide | System-Level ESD Protection Guide (Rev. D) | 2022/09/07 | ||
| Application note | ESD Protection Layout Guide (Rev. A) | PDF | HTML | 2022/04/07 | |
| User guide | Generic ESD Evaluation Module User's Guide (Rev. A) | PDF | HTML | 2021/09/27 | |
| White paper | Demystifying surge protection | 2018/11/06 | ||
| Technical article | ESD fundamentals, part 4: ESD capacitance | PDF | HTML | 2018/02/12 | |
| White paper | Designing USB for short-to-battery tolerance in automotive environments | 2016/02/10 | ||
| Analog Design Journal | Design Considerations for System-Level ESD Circuit Protection | 2012/09/25 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ESDEVM — ESD 평가 모듈
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| X1SON (DPY) | 2 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.