홈 전원 관리 AC/DC 및 DC/DC 컨버터(통합 FET)
홈
전원 관리
AC/DC 및 DC/DC 컨버터(통합 FET)

TPS62870-Q1

활성

오토모티브 2.7V~6V 입력, 6A, 적층형 동기식 벅 컨버터

지금 주문
데이터 시트

TPS62870-Q1

활성
데이터 시트 지금 주문

제품 상세 정보

Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Topology Buck Type Converter Iout (max) (A) 6 Vin (min) (V) 2.7 Vin (max) (V) 6 Switching frequency (min) (kHz) 1500 Switching frequency (max) (kHz) 3000 Features Adaptive/Dynamic Voltage Scaling, Differential Remote Sense, Enable, Fixed Output, Forced PWM, Frequency synchronization, I2C/PMBus, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, UVLO Fixed, UVLO fixed, Wettable flanks package EMI features Low parasitic Hotrod packaging, Spread Spectrum Control mode DCS-Control Vout (min) (V) 0.4 Vout (max) (V) 3.3, 3.35 Iq (typ) (µA) 1750 Duty cycle (max) (%) 55
Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Topology Buck Type Converter Iout (max) (A) 6 Vin (min) (V) 2.7 Vin (max) (V) 6 Switching frequency (min) (kHz) 1500 Switching frequency (max) (kHz) 3000 Features Adaptive/Dynamic Voltage Scaling, Differential Remote Sense, Enable, Fixed Output, Forced PWM, Frequency synchronization, I2C/PMBus, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, UVLO Fixed, UVLO fixed, Wettable flanks package EMI features Low parasitic Hotrod packaging, Spread Spectrum Control mode DCS-Control Vout (min) (V) 0.4 Vout (max) (V) 3.3, 3.35 Iq (typ) (µA) 1750 Duty cycle (max) (%) 55
VQFN-FCRLF (RXS) 16 9.0525 mm² 2.55 x 3.55
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, T A
  • Functional Safety-Capable
  • 2.7-V to 6-V input voltage range
  • Family of pin-to-pin compatible devices: 6-A, 9-A, 12-A, and 15-A
  • Four output voltage ranges:
    • 0.4-V to 0.71875-V in 1.25-mV steps
    • 0.4-V to 1.0375-V in 2.5-mV steps
    • 0.4-V to 1.675-V in 5-mV steps
    • 0.8-V to 3.35-V in 10-mV steps
  • Output voltage accuracy ±1%
  • 7-mΩ and 4.5-mΩ internal power MOSFETs
  • Adjustable external compensation
  • Resistor-selectable start-up output voltage
  • Resistor-selectable switching frequency
  • Power-save or forced-PWM operation
  • I 2C-compatible interface up to 1-MHz
  • Differential remote sensing
  • Optional stacked operation for increased output current capability
  • Thermal warning and thermal shutdown
  • Precise enable input
  • Active output discharge
  • Optional spread-spectrum clocking
  • Power-good output with a window comparator
  • Available in 2.55-mm × 3.55-mm × 1-mm VQFN package with wettable flanks
  • –40°C to 150°C junction temperature, T J
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, T A
  • Functional Safety-Capable
  • 2.7-V to 6-V input voltage range
  • Family of pin-to-pin compatible devices: 6-A, 9-A, 12-A, and 15-A
  • Four output voltage ranges:
    • 0.4-V to 0.71875-V in 1.25-mV steps
    • 0.4-V to 1.0375-V in 2.5-mV steps
    • 0.4-V to 1.675-V in 5-mV steps
    • 0.8-V to 3.35-V in 10-mV steps
  • Output voltage accuracy ±1%
  • 7-mΩ and 4.5-mΩ internal power MOSFETs
  • Adjustable external compensation
  • Resistor-selectable start-up output voltage
  • Resistor-selectable switching frequency
  • Power-save or forced-PWM operation
  • I 2C-compatible interface up to 1-MHz
  • Differential remote sensing
  • Optional stacked operation for increased output current capability
  • Thermal warning and thermal shutdown
  • Precise enable input
  • Active output discharge
  • Optional spread-spectrum clocking
  • Power-good output with a window comparator
  • Available in 2.55-mm × 3.55-mm × 1-mm VQFN package with wettable flanks
  • –40°C to 150°C junction temperature, T J

The TPS6287x -Q1 is a family of pin-to-pin 6-A, 9-A, 12-A, and 15-A synchronous step-down DC/DC converters with differential remote sensing. For each current rating, there are full-featured device variants with I 2C interface and limited-featured device variants without I 2C interface. All devices offer high efficiency and ease of use. Low-resistance power switches allow up to 15-A continuous output current at high ambient temperatures.

The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices.

The TPS6287x -Q1 family implements an enhanced DCS control scheme that supports fast transients with fixed-frequency operation. Devices can operate in power save mode for maximum efficiency, or forced-PWM mode for the best transient performance and lowest output voltage ripple.

An optional remote sensing feature maximizes voltage regulation at the point-of-load, and the device achieves better than ±1% DC voltage accuracy under all operating conditions.

The switching frequency is resistor-selectable through the FSEL pin. The switching frequency can be set to 1.5 MHz, 2.25 MHz, 2.5 MHz, or 3.0 MHz, or synchronized to an external clock in the same frequency range.

The I 2C-compatible interface offers several control, monitoring, and warning features, such as voltage monitoring and temperature-related warnings. The output voltage can be quickly adjusted to adapt the power consumption of the load to the performance needs of the application through the I 2C-compatible interface. The default start-up voltage is resistor-selectable through the VSEL pin.

The TPS6287x -Q1 is a family of pin-to-pin 6-A, 9-A, 12-A, and 15-A synchronous step-down DC/DC converters with differential remote sensing. For each current rating, there are full-featured device variants with I 2C interface and limited-featured device variants without I 2C interface. All devices offer high efficiency and ease of use. Low-resistance power switches allow up to 15-A continuous output current at high ambient temperatures.

The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices.

The TPS6287x -Q1 family implements an enhanced DCS control scheme that supports fast transients with fixed-frequency operation. Devices can operate in power save mode for maximum efficiency, or forced-PWM mode for the best transient performance and lowest output voltage ripple.

An optional remote sensing feature maximizes voltage regulation at the point-of-load, and the device achieves better than ±1% DC voltage accuracy under all operating conditions.

The switching frequency is resistor-selectable through the FSEL pin. The switching frequency can be set to 1.5 MHz, 2.25 MHz, 2.5 MHz, or 3.0 MHz, or synchronized to an external clock in the same frequency range.

The I 2C-compatible interface offers several control, monitoring, and warning features, such as voltage monitoring and temperature-related warnings. The output voltage can be quickly adjusted to adapt the power consumption of the load to the performance needs of the application through the I 2C-compatible interface. The default start-up voltage is resistor-selectable through the VSEL pin.
filter 기타 AC/DC 및 DC/DC 컨버터(통합 FET) 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
TPS62871-Q1 활성 오토모티브, 2.7V~6V 입력, 9A 적층형 동기식 벅 컨버터 Higher current option, provides flexiblity to increase current based on application need without changing the layout.
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS62816-Q1 활성 차량용 2.75V~6V, 6A 감압 전압 컨버터 - 2mm x 3mm 습식 플랭크 QFN 패키지 Without I²C interface and is not stackable.

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
22개 모두 보기
유형 직함 날짜
* Data sheet TPS6287x-Q12.7-V to 6-V Input, 6-A, 9-A, 12-A, 15-A, Stackable, Synchronous Step-Down Converters with Fast Transient Response datasheet (Rev. C) PDF | HTML 2023/10/11
Product overview Mobileye EyeQ™6H – Discrete Power Tree PDF | HTML 2024/11/07
Application note QFN and SON PCB Attachment (Rev. C) PDF | HTML 2023/12/06
Application note Benefiting from Step-Down Converters with an I2C Communication Interface (Rev. B) PDF | HTML 2023/11/29
Application note Using the Filters with the DC/DC Step-Down Converter PDF | HTML 2023/02/02
Application note Operating TPS6287X-Q1 Devices in a Stacked Configuration PDF | HTML 2023/01/30
Application note Adjusting the Output Voltage of a Fixed Output Voltage DC-DC Converter PDF | HTML 2022/12/22
Product overview Mobileye EyeQ6L – Semi Discrete Power Tree PDF | HTML 2022/08/05
Application note Understanding SOA Curves to Operate at High Output Currents and Temperature PDF | HTML 2022/05/05
Functional safety information TPS62870-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2022/05/02
Application note How to Measure Impedance of a Power Distribution Network of a DC-DC Converter PDF | HTML 2022/01/20
Application note Loop Gain Reconstruction of a Step-Down Converter from Output Impedance PDF | HTML 2022/01/20
White paper Enabling Higher Data Rates for Optical Modules With Small and Efficient Power 2021/03/22
White paper Benefits of a Resistor-to-Digital Converter in Ultra-Low Power Supplies 2019/10/14
Analog Design Journal Methods of output-voltage adjustment for DC/DC converters 2019/06/14
Analog Design Journal Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 2017/10/24
Analog Design Journal Understanding frequency variation in the DCS-Control(TM) topology 2015/10/30
Application note Basic Calculation of a Buck Converter's Power Stage (Rev. B) 2015/08/17
Analog Design Journal Five steps to a great PCB layout for a step-down converter 2015/01/29
Analog Design Journal High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions 2013/07/25
Application note Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) 2012/01/13
Application note Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs 2011/09/19

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS62873EVM-143 — TPS62873-Q1 평가 모듈 2.7V ~ 6V 입력, 스텝다운 컨버터

TPS62873EVM-143 평가 모듈(EVM)은 사용자가 TPS62873-Q1 벅 컨버터의 작동과 기능을 평가하고 테스트할 수 있도록 설계되었습니다. 또한 TPS62870-Q1, TPS62871-Q1 및 TPS62872-Q1 디바이스를 평가하는 데 사용할 수 있습니다. EVM은 2.7V~6.0V 입력 전압을 조정된 0.75V 출력 전압으로 변환합니다. TPS62873EVM-143의 출력 전류는 최대 15A까지 사용될 수 있습니다.

사용 설명서: PDF | HTML
TI.com에서 구매 불가
평가 보드

TPS62873EVM-144 — TPS62873-Q1 30A 스텝다운 컨버터 평가 모듈

TPS62873EVM-144 평가 모듈(EVM)은 작은 솔루션 크기와 높은 효율성에 최적화된 고주파, 동기, 스텝다운 컨버터입니다. EVM는 사용자가 스택 구성된 두 TPS62873 벅 컨버터의 작동과 기능을 쉽게 평가하고 테스트할 수 있도록 설계되었습니다. 또한 이 구성에서 TPS62870-Q1, TPS62871-Q1 및 TPS62872-Q1 디바이스를 평가하는 데 사용할 수 있습니다. EVM은 2.7V~6.0V 입력 전압을 조정된 0.75V 출력 전압으로 변환합니다. 이 EVM의 출력 전류는 최대 30A까지 올릴 수 있습니다
사용 설명서: PDF | HTML
TI.com에서 구매 불가
시뮬레이션 모델

TPS62870x, TPS62871x, TPS62872x, TPS62873x PSpice Encrypted Average Model (Rev. B)

SLVMDQ1B.ZIP (2687 KB) - PSpice Model
다운로드
시뮬레이션 모델

TPS62870x, TPS62871x, TPS62872x, TPS62873x SIMPLIS Encrypted Transient and Average Model (Rev. B)

SLVMDN7B.ZIP (1710 KB) - SIMPLIS Model
다운로드
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
VQFN-FCRLF (RXS) 16 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상