Home Amplifiers Operational amplifiers (op amps) High-speed op amps (GBW ≥ 50 MHz)
Home
Amplifiers
Operational amplifiers (op amps)
High-speed op amps (GBW ≥ 50 MHz)

THS3201-EP

NOT RECOMMENDED FOR NEW DESIGNS

Enhanced Product 1.8-Ghz Low Distortion Current Feedback Amplifier

Order now
Data sheet
THS3201-EP is not recommended for new designs
This product continues to be available for existing customers. New designs should consider an alternate product.
open-in-new Compare alternates
Similar functionality to the compared device
LMH6628QML ACTIVE Dual Wideband, Low Noise, Voltage Feedback Op Amp Dual channel, extended temperature range (-55°C) and wide bandwidth (300MHz)

THS3201-EP

NOT RECOMMENDED FOR NEW DESIGNS
Data sheet Order now

Product details

Architecture Current FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 6.6 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 15 GBW (typ) (MHz) 1800 BW at Acl (MHz) 1800 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 6700 Vn at flatband (typ) (nV√Hz) 1.65 Vn at 1 kHz (typ) (nV√Hz) 1.65 Iq per channel (typ) (mA) 14 Vos (offset voltage at 25°C) (max) (mV) 4 Rail-to-rail No Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125 CMRR (typ) (dB) 71 Input bias current (max) (pA) 35000000 Offset drift (typ) (µV/°C) 10 Iout (typ) (mA) 115 2nd harmonic (dBc) 69 3rd harmonic (dBc) 75 Frequency of harmonic distortion measurement (MHz) 10
Architecture Current FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 6.6 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 15 GBW (typ) (MHz) 1800 BW at Acl (MHz) 1800 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 6700 Vn at flatband (typ) (nV√Hz) 1.65 Vn at 1 kHz (typ) (nV√Hz) 1.65 Iq per channel (typ) (mA) 14 Vos (offset voltage at 25°C) (max) (mV) 4 Rail-to-rail No Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125 CMRR (typ) (dB) 71 Input bias current (max) (pA) 35000000 Offset drift (typ) (µV/°C) 10 Iout (typ) (mA) 115 2nd harmonic (dBc) 69 3rd harmonic (dBc) 75 Frequency of harmonic distortion measurement (MHz) 10
HVSSOP (DGN) 8 14.7 mm² 3 x 4.9
  • Unity Gain Bandwidth: 1.8 GHz
  • High Slew Rate: 6700 V/µs (G = 2 V/V, RL = 100 , 5-V Step)
  • IMD3: &150;78 dBc at 20 MHz: (G = 10 V/V, RL = 100 , 2-VPP Envelope)
  • Noise Figure: 11 dB (G = 10 V/V, RG = 28 , RF = 255 )
  • Input Referred Noise (f > 10 MHz)
    • Voltage Noise: 1.65 nV/Hz
    • Noninverting Current Noise: 13.4 pA/Hz
    • Inverting Current Noise: 20 pA/Hz
  • Output Drive: 100 mA
  • Power-Supply Voltage Range: ±3.3 V to ±7.5 V
  • SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication Site
    • Available in Military (–5°C/125°C) Temperature Range(1)
    • Extended Product Life Cycle
    • Extended Product-Change Notification
    • Product Traceability
  • APPLICATIONS
    • High-Resolution, High-Sampling-Rate Analog-to-Digital Converter Drivers
    • High-Resolution, High-Sampling-Rate Digital-to-Analog Converter Output Buffers
    • Test and Measurement
    • ATE

Additional temperature ranges are available - contact factory
PowerPAD is a trademark of Texas Instruments.
  • Unity Gain Bandwidth: 1.8 GHz
  • High Slew Rate: 6700 V/µs (G = 2 V/V, RL = 100 , 5-V Step)
  • IMD3: &150;78 dBc at 20 MHz: (G = 10 V/V, RL = 100 , 2-VPP Envelope)
  • Noise Figure: 11 dB (G = 10 V/V, RG = 28 , RF = 255 )
  • Input Referred Noise (f > 10 MHz)
    • Voltage Noise: 1.65 nV/Hz
    • Noninverting Current Noise: 13.4 pA/Hz
    • Inverting Current Noise: 20 pA/Hz
  • Output Drive: 100 mA
  • Power-Supply Voltage Range: ±3.3 V to ±7.5 V
  • SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication Site
    • Available in Military (–5°C/125°C) Temperature Range(1)
    • Extended Product Life Cycle
    • Extended Product-Change Notification
    • Product Traceability
  • APPLICATIONS
    • High-Resolution, High-Sampling-Rate Analog-to-Digital Converter Drivers
    • High-Resolution, High-Sampling-Rate Digital-to-Analog Converter Output Buffers
    • Test and Measurement
    • ATE

Additional temperature ranges are available - contact factory
PowerPAD is a trademark of Texas Instruments.

The THS3201 is a wide-band, high-speed current-feedback amplifier, designed to operate over a wide supply range of ±3.3 V to ±7.5 V for today’s high-performance applications.

The wide supply range, combined with low distortion and high slew rate, makes the THS3201 ideally suited for arbitrary waveform driver applications. The distortion performance also enables driving high-resolution and high-sampling rate ADCs.

High-voltage operation capabilties make the THS3201 especially suitable for many test, measurement, and ATE applications where lower-voltage devices do not offer enough voltage swing capabilty. Output rise and fall times are nearly independent of step size (to first-order appoximation), making the THS3201 ideal for buffering small to large step pulses with excellent linearity in high dynamic systems.

The THS3201 is offered in 8-pin SOIC and 8-pin MSOP with PowerPADTM packages.

The THS3201 is a wide-band, high-speed current-feedback amplifier, designed to operate over a wide supply range of ±3.3 V to ±7.5 V for today’s high-performance applications.

The wide supply range, combined with low distortion and high slew rate, makes the THS3201 ideally suited for arbitrary waveform driver applications. The distortion performance also enables driving high-resolution and high-sampling rate ADCs.

High-voltage operation capabilties make the THS3201 especially suitable for many test, measurement, and ATE applications where lower-voltage devices do not offer enough voltage swing capabilty. Output rise and fall times are nearly independent of step size (to first-order appoximation), making the THS3201 ideal for buffering small to large step pulses with excellent linearity in high dynamic systems.

The THS3201 is offered in 8-pin SOIC and 8-pin MSOP with PowerPADTM packages.
filter Find other High-speed op amps (GBW ≥ 50 MHz)
Download

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 2
Type Title Date
* Radiation & reliability report THS3201MDGNREP Reliability Report 05 Oct 2011
* Data sheet 1.8-GHz Low Distortion Current Feedback Amplifier datasheet (Rev. B) 08 Jan 2009

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location