首頁 電池管理 IC 電池充電器 IC
首頁
電池管理 IC
電池充電器 IC
最新

BQ25186

預覽

具有電源路徑和太陽能輸入支援的 1A I²C 控制線性電池充電器

立即訂購
產品規格表

BQ25186

預覽
產品規格表 立即訂購

產品詳細資料

Number of series cells 1 Charge current (max) (A) 1 Vin (max) (V) 18 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Battery charge voltage (min) (V) 3.6 Battery charge voltage (max) (V) 4.65 Absolute max Vin (max) (V) 25 Control topology Linear Control interface I2C Features BAT temp thermistor monitoring (JEITA profile), IC thermal regulation, IINDPM (Input current limit), Input OVP, Power Path, Solar input/MPPT, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3 Rating Catalog Operating temperature range (°C) -40 to 125
Number of series cells 1 Charge current (max) (A) 1 Vin (max) (V) 18 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Battery charge voltage (min) (V) 3.6 Battery charge voltage (max) (V) 4.65 Absolute max Vin (max) (V) 25 Control topology Linear Control interface I2C Features BAT temp thermistor monitoring (JEITA profile), IC thermal regulation, IINDPM (Input current limit), Input OVP, Power Path, Solar input/MPPT, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3 Rating Catalog Operating temperature range (°C) -40 to 125
WSON (DLH) 10 4.4 mm² 2.2 x 2
  • 1-A linear battery charger
    • 3.0V to 18V input voltage operating range optimized for battery-to-battery charging and USB adapters
    • 25V tolerant input voltage
    • Configurable battery regulation voltage with 0.5% accuracy from 3.6V to 4.65V in 10mV steps
    • Li-ion, Li-Poly, and LiFePO4 chemistries support
    • 5mA to 1A configurable fast charge current
    • 115mΩ battery FET ON resistance
    • Up to 3.125A discharge current to support high system loads
    • Configurable termination current down to 0.5mA
    • Configurable NTC charging profile thresholds including JEITA support
    • Power cycle and advanced reset mechanism
  • Power path management for powering the system and charging the battery
    • Regulated system voltage (SYS) ranging from 4.4V to 4.9V in addition to battery voltage tracking and input pass-though options
    • Configurable input current limit
    • USB Suspend mode supported
    • Battery Tracking input voltage dynamic power management (VINDPM) for high impedance input sources
    • Dynamic power path management optimizes charging from weak adapters
  • Ultra low quiescent current
    • 15nA Shutdown mode
    • 3.2µA Ship mode with button press wake
    • 4µA in Battery Only mode
    • 30µA Input adapter Iq in sleep mode
  • One push-button wake-up and reset input
  • Integrated fault protection
    • Input overvoltage protection (VIN_OVP)
    • Battery undervoltage protection (BUVLO)
    • Battery short protection (BATSC)
    • Battery overcurrent protection (BATOCP)
    • Input current limit protection (ILIM)
    • Thermal regulation (TREG) and thermal shutdown (TSHUT)
    • Battery thermal fault protection (TS)
    • Watchdog and safety timer fault
  • 1-A linear battery charger
    • 3.0V to 18V input voltage operating range optimized for battery-to-battery charging and USB adapters
    • 25V tolerant input voltage
    • Configurable battery regulation voltage with 0.5% accuracy from 3.6V to 4.65V in 10mV steps
    • Li-ion, Li-Poly, and LiFePO4 chemistries support
    • 5mA to 1A configurable fast charge current
    • 115mΩ battery FET ON resistance
    • Up to 3.125A discharge current to support high system loads
    • Configurable termination current down to 0.5mA
    • Configurable NTC charging profile thresholds including JEITA support
    • Power cycle and advanced reset mechanism
  • Power path management for powering the system and charging the battery
    • Regulated system voltage (SYS) ranging from 4.4V to 4.9V in addition to battery voltage tracking and input pass-though options
    • Configurable input current limit
    • USB Suspend mode supported
    • Battery Tracking input voltage dynamic power management (VINDPM) for high impedance input sources
    • Dynamic power path management optimizes charging from weak adapters
  • Ultra low quiescent current
    • 15nA Shutdown mode
    • 3.2µA Ship mode with button press wake
    • 4µA in Battery Only mode
    • 30µA Input adapter Iq in sleep mode
  • One push-button wake-up and reset input
  • Integrated fault protection
    • Input overvoltage protection (VIN_OVP)
    • Battery undervoltage protection (BUVLO)
    • Battery short protection (BATSC)
    • Battery overcurrent protection (BATOCP)
    • Input current limit protection (ILIM)
    • Thermal regulation (TREG) and thermal shutdown (TSHUT)
    • Battery thermal fault protection (TS)
    • Watchdog and safety timer fault

The BQ25186 is a linear battery charger IC focusing on small solution size and low quiescent current for extending battery life. The device is available in a leadless, small package with a thermal pad giving thermal performance. The device can support up to 1A charging and system loads of up to 3.125A.

The battery is charged using a standard Li-ion or LiFePO4 charge profile with three phases: precharge, constant current and constant voltage. Thermal regulation provides the maximum charge current while managing the device temperature. The charger is also optimized for battery to battery charging with 3V minimum input voltage operation and can withstand 25V absolute maximum line transients. The device integrates a single push-button input to reduce the total solution footprint.

The BQ25186 is a linear battery charger IC focusing on small solution size and low quiescent current for extending battery life. The device is available in a leadless, small package with a thermal pad giving thermal performance. The device can support up to 1A charging and system loads of up to 3.125A.

The battery is charged using a standard Li-ion or LiFePO4 charge profile with three phases: precharge, constant current and constant voltage. Thermal regulation provides the maximum charge current while managing the device temperature. The charger is also optimized for battery to battery charging with 3V minimum input voltage operation and can withstand 25V absolute maximum line transients. The device integrates a single push-button input to reduce the total solution footprint.
filter 尋找其它 電池充電器 IC
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet BQ25186 1-Cell, 1-A I2 C Linear Battery Charger with Power Path, Ship Mode, Shutdown Mode, and Battery Tracking VINDPM datasheet PDF | HTML 2024年 5月 6日
EVM User's guide BQ25186 Evaluation Module User's Guide PDF | HTML 2024年 4月 29日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

BQ25186EVM — BQ25186 評估模組

BQ25186EVM 是適用於 BQ25186 電池充電管理 IC 的評估套件。BQ25186 是一款 I2C 控制的 1A 線性電池充電器，其電源路徑採用具有導熱片的小型 QFN 封裝。BQ25186 整合了工業和個人電子應用最常見的功能，並以小型解決方案尺寸提供超低 IQ、整合式保護、可編程性、TS 監控與最佳化的熱性能。
使用指南: PDF | HTML
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WSON (DLH) 10 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片