BQ26200
- Multifunction Monitoring Device Designed to Work With an Intelligent Host Controller
- Provides State of Charge Information for Rechargeable Batteries
- Enhances Charge Termination
- High Accuracy Coulometric Charge and Discharge Current Integration With Automatic Offset Compensation
- Differential Current Sense
- 32 Bytes of General-Purpose RAM
- 96 Bytes of Flash (Including 32 Bytes of Shadow Flash)
- 8 Bytes of ID ROM
- Internal Temperature Sensor Eliminates Need for External Thermistor
- Multifunction Digital Output Port
- High-Accuracy Internal Timebase Eliminates External Crystal Oscillator
- Low Power Consumption
- Operating : < 95 µA
- Sleep: < 2 µA
- Single-Wire HDQ Serial Interface
- 8-Lead TSSOP Package
The bq26200 is an advanced battery monitoring IC designed to accurately measure the charge and discharge currents in rechargeable battery packs. Intended for pack integration, the bq26200 contains all the necessary functions to form the basis of a comprehensive battery capacity management system in portable applications such as cellular phones, PDA’s, or other portable products.
The bq26200 works with the host controller in the portable system to implement the battery management system. The host controller is responsible for interpreting the bq26200 data and communicating meaningful battery data to the end-user or power management system.
The bq26200 provides 64 bytes of general-purpose flash memory, 8 bytes of ID ROM and 32 bytes of flash backed RAM for data storage. The non-volatile memory can maintain formatted battery monitor information, identification codes, warranty information, or other critical battery parameters during periods when the battery is temporarily shorted or deeply discharged.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | High-Performance Battery Coulomb Counter for Cellular Phone Applications datasheet (Rev. A) | 2004年 11月 3日 | |
| Application note | HDQ Communication Basics (Rev. A) | 2008年 9月 18日 | ||
| Application note | HDQ Compatibility Between OMAP and BQ Products | 2004年 6月 17日 | ||
| Application note | Gas Gauging Basics Using TI Battery Monitor ICs (Rev. A) | 2003年 10月 17日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| TSSOP (PW) | 8 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點