首頁 電源管理 電源開關 eFuses 和熱插拔制器
首頁
電源管理
電源開關
eFuses 和熱插拔制器

LM25066I

現行

具內部節點管理工具與 I2C 和 PMBus 的 2.9V 至 17-V 熱插拔控制器

立即訂購
產品規格表

LM25066I

現行
產品規格表 立即訂購

產品詳細資料

FET External Vin (min) (V) 2.9 Vin (max) (V) 17 Vabsmax_cont (V) 24 Current limit (min) (A) 0.01 Current limit (max) (A) 500 Overcurrent response Circuit breaker, current limiting Fault response Auto-retry, Latch-off Soft start Adjustable Overvoltage response Cut-off Features Current monitoring, Fault output, PMBus, Power good signal Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Current monitoring, Inrush current control, Overvoltage protection, Power good signal, Short circuit protection, Thermal shutdown Quiescent current (Iq) (typ) (A) 0.0058 Quiescent current (Iq) (max) (A) 0.008
FET External Vin (min) (V) 2.9 Vin (max) (V) 17 Vabsmax_cont (V) 24 Current limit (min) (A) 0.01 Current limit (max) (A) 500 Overcurrent response Circuit breaker, current limiting Fault response Auto-retry, Latch-off Soft start Adjustable Overvoltage response Cut-off Features Current monitoring, Fault output, PMBus, Power good signal Rating Catalog Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Current monitoring, Inrush current control, Overvoltage protection, Power good signal, Short circuit protection, Thermal shutdown Quiescent current (Iq) (typ) (A) 0.0058 Quiescent current (Iq) (max) (A) 0.008
WQFN (NHZ) 24 20 mm² 5 x 4
  • Fully Node Manager 2.0 and 2.5 Compliant with I2C/SMBus interface and PMBus™ compliant command structure
  • Input voltage range: 2.9V to 17V
  • Programmable 25mV or 46mV current limit threshold
  • Read_EIN accurately measures true input power via simultaneous sampling
  • Configurable circuit breaker protection for hard shorts
  • Configurable under- and over-voltage lockouts with hysteresis
  • Real time monitoring of VIN, VOUT, IIN, PIN, VAUX with 12-bit resolution and 1 kHz sampling rate
  • Current measurement accuracy: ±1% (LM25066IA) and Power measurement accuracy: ±2.0% (LM25066IA) over temperature
  • Averaging of VIN, IIN, PIN, and VOUT over programmable interval ranging from 0.001 to 4 seconds
  • Programmable WARN and FAULT thresholds with SMBA notification
  • Blackbox capture of telemetry measurements and device status triggered by WARN or FAULT condition
  • 24-lead WQFN package

All trademarks are the property of their respective owners.

  • Fully Node Manager 2.0 and 2.5 Compliant with I2C/SMBus interface and PMBus™ compliant command structure
  • Input voltage range: 2.9V to 17V
  • Programmable 25mV or 46mV current limit threshold
  • Read_EIN accurately measures true input power via simultaneous sampling
  • Configurable circuit breaker protection for hard shorts
  • Configurable under- and over-voltage lockouts with hysteresis
  • Real time monitoring of VIN, VOUT, IIN, PIN, VAUX with 12-bit resolution and 1 kHz sampling rate
  • Current measurement accuracy: ±1% (LM25066IA) and Power measurement accuracy: ±2.0% (LM25066IA) over temperature
  • Averaging of VIN, IIN, PIN, and VOUT over programmable interval ranging from 0.001 to 4 seconds
  • Programmable WARN and FAULT thresholds with SMBA notification
  • Blackbox capture of telemetry measurements and device status triggered by WARN or FAULT condition
  • 24-lead WQFN package

All trademarks are the property of their respective owners.

While the LM25066I/A is functionally similar to the LM25066/A, the LM25066I/A is fully compliant to Intel Node Manager 2.0, 2.5 and adds the READ_EIN energy accumulator feature. The LM25066I/A combines a high-performance hot-swap controller with a PMBus 1.2™ compliant SMBus/I2C interface to accurately measure, control and protect the electrical operating conditions of critical systems. The LM25066I/A continuously supplies real-time power, voltage, current, temperature, and fault data to the system management host via the SMBus interface.

The LM25066I/A control block includes a unique hot-swap architecture that provides current and power limiting to protect sensitive circuitry even during the most stressful conditions. A fast-acting circuit breaker prevents damage in the event of a short circuit on the output. The input under-voltage, over-voltage hysteresis, insertion delay time and fault detection time are all configurable. A temperature monitoring block on the LM25066I/A interfaces with a low-cost external diode for continuous temperature assessment of the external MOSFET or other thermal sensitive components. The POWER GOOD output provides a fast alert when the input and/or output voltages are outside their programmed range. Accurate power readings are accomplished by using the READ_EIN command. A black box (Telemetry/Fault Snapshot) function captures and stores telemetry data and device status in the event of a warning or a fault.

While the LM25066I/A is functionally similar to the LM25066/A, the LM25066I/A is fully compliant to Intel Node Manager 2.0, 2.5 and adds the READ_EIN energy accumulator feature. The LM25066I/A combines a high-performance hot-swap controller with a PMBus 1.2™ compliant SMBus/I2C interface to accurately measure, control and protect the electrical operating conditions of critical systems. The LM25066I/A continuously supplies real-time power, voltage, current, temperature, and fault data to the system management host via the SMBus interface.

The LM25066I/A control block includes a unique hot-swap architecture that provides current and power limiting to protect sensitive circuitry even during the most stressful conditions. A fast-acting circuit breaker prevents damage in the event of a short circuit on the output. The input under-voltage, over-voltage hysteresis, insertion delay time and fault detection time are all configurable. A temperature monitoring block on the LM25066I/A interfaces with a low-cost external diode for continuous temperature assessment of the external MOSFET or other thermal sensitive components. The POWER GOOD output provides a fast alert when the input and/or output voltages are outside their programmed range. Accurate power readings are accomplished by using the READ_EIN command. A black box (Telemetry/Fault Snapshot) function captures and stores telemetry data and device status in the event of a warning or a fault.
filter 尋找其它 eFuses 和熱插拔制器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
LM25066IA 現行 具 I2C 和 PMBus 的 2.9V 至 17-V 熱插拔控制器 - 具更高監控精度與內部節點 Hot swap controller with I2C and PMBus - increased monitoring accuracy and intel node
功能相同，但引腳輸出與所比較的裝置不同
TPS25990 現行 具備數位遙測控制器的 2.9-V 至 16-V、0.79-mΩ、60-A eFuse Integrated MOSFET, higher current density and stackable

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 7
類型 標題 日期
* Data sheet LM25066I/LM25066A Intel Node Mgr Compliant Sys Pwr Mgmt and Protectn IC datasheet (Rev. C) 2013年 3月 6日
Application note Basics of Power Switches (Rev. A) PDF | HTML 2019年 4月 26日
Selection guide Power Management Guide 2018 (Rev. R) 2018年 6月 25日
Technical article Simplify digital hot swap design using the PI-Commander GUI PDF | HTML 2016年 6月 6日
Application note Handling System Transients in Hot Swap Applications 2015年 5月 8日
Application note Robust Hot Swap Design (Rev. A) 2015年 4月 8日
User guide AN-2293 LM25066I/A Node Manager Compliant Evaluation Board (Rev. A) 2013年 5月 6日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發模組 (EVM) 的 GUI

PMBUSMGRGUI-SW — LM25066, LM5066, LM5064, LM25056 PMBus Manager GUI

Companion GUI for evaluation boards supporting: LM25066, LM5066, LM5064 Hot Swap + telemetry devices and the LM25056 telemetry-only device

支援產品和硬體

支援產品和硬體

產品
eFuses 和熱插拔制器
LM25066 — 具 PMBus 的 2.9-V 至 17-V 熱插拔控制器 LM25066I — 具內部節點管理工具與 I2C 和 PMBus 的 2.9V 至 17-V 熱插拔控制器 LM5064 — 具 PMBus 的 -10-V 至 -80-V 熱插拔控制器 LM5066 — 具電流、電壓和電源監控及 PMBus 的 10 V 至 80 V 熱插拔控制器
數位電源監測器
LM25056 — 3 至 17V、12 位元 pmbus 輸出電流/電壓/功率/溫度監控器
硬體開發
開發板
LM5066EVK — LM5066 評估套件
下載
開發模組 (EVM) 的 GUI

SLVC572 — PI-Commander EVM GUI

支援產品和硬體

支援產品和硬體

產品
eFuses 和熱插拔制器
LM25066 — 具 PMBus 的 2.9-V 至 17-V 熱插拔控制器 LM25066A — 具更高監控精度與 I2C 和 PMBus 的 2.9V 至 17-V 熱插拔控制器 LM25066I — 具內部節點管理工具與 I2C 和 PMBus 的 2.9V 至 17-V 熱插拔控制器 LM25066IA — 具 I2C 和 PMBus 的 2.9V 至 17-V 熱插拔控制器 - 具更高監控精度與內部節點 LM5064 — 具 PMBus 的 -10-V 至 -80-V 熱插拔控制器 LM5066 — 具電流、電壓和電源監控及 PMBus 的 10 V 至 80 V 熱插拔控制器 LM5066I — 具進階電流、電壓和電源監控準確度的 10 V 至 80 V 熱插拔控制器
供電設備
TPS23861 — 具自主模式的 2 對、Type-2、4 通道 PoE PSE
硬體開發
開發板
LM5056EVM — LM5056 高電壓系統電源管理 IC 評估模組 TPS23861EVM-612 — 適用於四路 IEEE 802.3at PoE PSE 控制器的 TPS23861EVM-612 評估模組
下載
支援軟體

SNVU310 — LM25066 Design Calculator

支援產品和硬體

支援產品和硬體

產品
eFuses 和熱插拔制器
LM25066 — 具 PMBus 的 2.9-V 至 17-V 熱插拔控制器 LM25066A — 具更高監控精度與 I2C 和 PMBus 的 2.9V 至 17-V 熱插拔控制器 LM25066I — 具內部節點管理工具與 I2C 和 PMBus 的 2.9V 至 17-V 熱插拔控制器 LM25066IA — 具 I2C 和 PMBus 的 2.9V 至 17-V 熱插拔控制器 - 具更高監控精度與內部節點
下載
計算工具

SNVR505 — LM25066 Design Calculator With FET Recommendation

支援產品和硬體

支援產品和硬體

產品
eFuses 和熱插拔制器
LM25066 — 具 PMBus 的 2.9-V 至 17-V 熱插拔控制器 LM25066A — 具更高監控精度與 I2C 和 PMBus 的 2.9V 至 17-V 熱插拔控制器 LM25066I — 具內部節點管理工具與 I2C 和 PMBus 的 2.9V 至 17-V 熱插拔控制器 LM25066IA — 具 I2C 和 PMBus 的 2.9V 至 17-V 熱插拔控制器 - 具更高監控精度與內部節點
下載
計算工具

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
支援產品和硬體

支援產品和硬體

此設計資源支援此類別中多數產品。

檢查產品詳細資料頁面以確認支援。
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (NHZ) 24 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片