TPS23880

現行

具有可編程 SRAM 的 4 對、Type-4、8 通道 PoE PSE

產品詳細資料

Vin (min) (V) 44 Vin (max) (V) 57 ILIM Programmable PoE standards supported 802.3at Type 1 (802.3af), 802.3at Type 2, 802.3bt Type 3, 802.3bt Type 4 FET External MPS method DC Disconnect Pair control 2-Pair Alt A, 4-Pair Operating temperature range (°C) -40 to 125 Features Auto Mode, Current Limit with Foldback, Fast shutdown, Multi Level Port Priority, Over Current Reporting, Over Temp Reporting, Port remapping, Programmable PCUT, Programmable Port Power Limiting, SRAM Programmable Number of PSE ports 8 Rating Catalog
Vin (min) (V) 44 Vin (max) (V) 57 ILIM Programmable PoE standards supported 802.3at Type 1 (802.3af), 802.3at Type 2, 802.3bt Type 3, 802.3bt Type 4 FET External MPS method DC Disconnect Pair control 2-Pair Alt A, 4-Pair Operating temperature range (°C) -40 to 125 Features Auto Mode, Current Limit with Foldback, Fast shutdown, Multi Level Port Priority, Over Current Reporting, Over Temp Reporting, Port remapping, Programmable PCUT, Programmable Port Power Limiting, SRAM Programmable Number of PSE ports 8 Rating Catalog
VQFN (RTQ) 56 64 mm² 8 x 8
  • IEEE 802.3bt PSE solution for PoE 2 Type 3 or Type 4 Power Over Ethernet applications
  • Eight independent PSE channels
  • SRAM Programmable memory
  • Programmable power limiting accuracy ±3%
  • Selectable 2-pair or 4-pair port power allocations
    • 15.4 W, 30 W, 45 W, 60 W, 75 W or 90 W
  • Single and dual signature PD compatibility
  • Dedicated 14-bit integrating current ADC per port
    • Inherent filtering
    • Noise immune MPS for DC disconnect
    • 2% Current sensing accuracy
    • 100-ms Rolling port current averaging
  • 1- or 3-Bit fast port shutdown input
  • Auto-class discovery and power measurement
  • Never Fooled 4-Point detection
  • Inrush and operational foldback protection
  • 425-mA and 1.25-A Selectable current limits
  • Port re-mapping
  • 8-Bit or 16-bit I2C communication
  • Flexible processor controlled operating modes
    • Auto, semi auto and manual / diagnostic
  • Per Port voltage monitoring and telemetry
  • –40°C to +125°C Temperature operation
  • IEEE 802.3bt PSE solution for PoE 2 Type 3 or Type 4 Power Over Ethernet applications
  • Eight independent PSE channels
  • SRAM Programmable memory
  • Programmable power limiting accuracy ±3%
  • Selectable 2-pair or 4-pair port power allocations
    • 15.4 W, 30 W, 45 W, 60 W, 75 W or 90 W
  • Single and dual signature PD compatibility
  • Dedicated 14-bit integrating current ADC per port
    • Inherent filtering
    • Noise immune MPS for DC disconnect
    • 2% Current sensing accuracy
    • 100-ms Rolling port current averaging
  • 1- or 3-Bit fast port shutdown input
  • Auto-class discovery and power measurement
  • Never Fooled 4-Point detection
  • Inrush and operational foldback protection
  • 425-mA and 1.25-A Selectable current limits
  • Port re-mapping
  • 8-Bit or 16-bit I2C communication
  • Flexible processor controlled operating modes
    • Auto, semi auto and manual / diagnostic
  • Per Port voltage monitoring and telemetry
  • –40°C to +125°C Temperature operation

The TPS23880 is an 8-channel power sourcing equipment (PSE) controller engineered to insert power onto Ethernet cables in accordance with the IEEE 802.3bt standard. The eight individual power channels can be configured in any combination of 2-Pair (1-channel) or 4-Pair (2-channels) PoE Ports. The PSE controller can detect powered devices (PDs) that have a valid signature, complete mutual identification, and apply power.

Programmable SRAM enables in-field firmware upgradability over I2C to ensure IEEE compliance and interoperability with the latest PoE enabled devices. Dedicated per port ADCs provide continuous port current monitoring and the ability to perform parallel classification measurements for faster port turn on times. A ±3% accurate programmable port power limit provides the ability to expand the maximum power sourced above 90 W without exceeding 100 W while also making system level power management control more easy to implement and reliable. The Fast Shutdown (OSS) input provides up to eight levels of per port shutdown priority for applications requiring immediate disabling of multiple ports. The 255-mΩ current sense resistor and external FET architecture allow designs to balance size, efficiency, thermal and solution cost requirements. 

Port remapping and pin-to-pin compatibility with the TPS2388, TPS23881, and TPS23882 devices eases migration from previous generation PSE designs and enables interchangeable 2-layer PCB designs to accommodate different system PoE power configurations.

The TPS23880 is an 8-channel power sourcing equipment (PSE) controller engineered to insert power onto Ethernet cables in accordance with the IEEE 802.3bt standard. The eight individual power channels can be configured in any combination of 2-Pair (1-channel) or 4-Pair (2-channels) PoE Ports. The PSE controller can detect powered devices (PDs) that have a valid signature, complete mutual identification, and apply power.

Programmable SRAM enables in-field firmware upgradability over I2C to ensure IEEE compliance and interoperability with the latest PoE enabled devices. Dedicated per port ADCs provide continuous port current monitoring and the ability to perform parallel classification measurements for faster port turn on times. A ±3% accurate programmable port power limit provides the ability to expand the maximum power sourced above 90 W without exceeding 100 W while also making system level power management control more easy to implement and reliable. The Fast Shutdown (OSS) input provides up to eight levels of per port shutdown priority for applications requiring immediate disabling of multiple ports. The 255-mΩ current sense resistor and external FET architecture allow designs to balance size, efficiency, thermal and solution cost requirements. 

Port remapping and pin-to-pin compatibility with the TPS2388, TPS23881, and TPS23882 devices eases migration from previous generation PSE designs and enables interchangeable 2-layer PCB designs to accommodate different system PoE power configurations.

下載 觀看有字幕稿的影片 影片
索取更多資訊

提供 TPS23880 產品諮詢和最新韌體下載。立即索取

如需降低 Rsense (200mΩ) 及自主模式操作,請查看 TPS23881

若為 2 對、Type-3 30W 運作,請查看 TPS23882

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 9
類型 標題 日期
* Data sheet TPS23880 Type-4 4-Pair 8-Channel PoE 2 PSE Controller with Programmable SRAM datasheet (Rev. G) PDF | HTML 2020年 8月 14日
Application brief How to Load TPS2388x SRAM and Parity Code Over I2C (Rev. E) PDF | HTML 2023年 4月 20日
Test report TPS23880 PoE2 Test Report 2020年 5月 26日
Design guide 24-Port (4 Pair) Power Sourcing Equipment Reference Design for Multi-port Applic (Rev. A) 2019年 10月 15日
EVM User's guide TPS23880EVM: PoE, PSE, TPS23880 Evaluation Module (Rev. B) 2018年 10月 17日
Technical article Key considerations for designing with the new PoE standard PDF | HTML 2018年 7月 16日
Technical article The new PoE standard: It’s almost here PDF | HTML 2018年 6月 6日
Application note Beyond BT High-Power PoE Solution using the TPS23880 and TPS2372-4 2018年 4月 17日
Application note TPS23861 Power-On Considerations 2015年 7月 21日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

子卡

TPS23880EVM-008 — 適合 IEEE 802.3bt 就緒 PoE PSE 應用的 TPS23880 EVM 子卡

TPS23880EVM-008 is the daughter card to evaluate the TPS23880 which is a 4-pair, type-4, 8-channel Power-over-Ethernet (PoE) PSE with programmable SRAM. This daughter card provides evaluation and reference circuitry for the TPS23880 which is suitable for high power PSE applications such as campus (...)

使用指南: PDF
TI.com 無法提供
開發套件

BOOST-PSEMTHR-007 — 適合 IEEE 802.3bt 就緒 PoE PSE 應用的 TPS2388x 主機板

BOOST-PSEMTHR-007 是 TPS23880 和 TPS23881 PSE 控制器的基板。此電路板包含四組 2 對埠,可用於為 IEEE 802.3at 應用傳送高達 30W/埠的功率,以及兩組 4 對埠,可用於為 IEEE 802.3bt 應用傳送高達 90W/埠的功率。

使用指南: PDF
TI.com 無法提供
程式碼範例或展示

SLVC709 TPS23880 PoE MSP430 Reference Code for Basic Applications

支援產品和硬體

支援產品和硬體

產品
供電設備
TPS23880 具有可編程 SRAM 的 4 對、Type-4、8 通道 PoE PSE
硬體開發
子卡
TPS23880EVM-008 適合 IEEE 802.3bt 就緒 PoE PSE 應用的 TPS23880 EVM 子卡
開發套件
BOOST-PSEMTHR-007 適合 IEEE 802.3bt 就緒 PoE PSE 應用的 TPS2388x 主機板
程式碼範例或展示

SLVC720 TPS23880 PoE MSP430 Reference Code for Port Power Management Applications

支援產品和硬體

支援產品和硬體

產品
供電設備
TPS23880 具有可編程 SRAM 的 4 對、Type-4、8 通道 PoE PSE
硬體開發
子卡
TPS23880EVM-008 適合 IEEE 802.3bt 就緒 PoE PSE 應用的 TPS23880 EVM 子卡
開發套件
BOOST-PSEMTHR-007 適合 IEEE 802.3bt 就緒 PoE PSE 應用的 TPS2388x 主機板
開發模組 (EVM) 的 GUI

SLVC772 TPS2388x EVM GUI

支援產品和硬體

支援產品和硬體

產品
供電設備
TPS23880 具有可編程 SRAM 的 4 對、Type-4、8 通道 PoE PSE TPS23881 具有 200-mΩ RSENSE 的 4 對、Type-4、8 通道 PoE PSE  TPS23882 具有 SRAM 和 200mΩ RSENSE 的 Type-3、2 對、8 通道 PoE PSE 控制器 TPS23882B 具自主模式、SRAM 和 200-mΩ RSENSE 的 Type-3 雙對 8 通道 PoE PSE 控制器
硬體開發
開發板
BOOST-PSEMTHR8-097 TPS23882 Type-3、30W、2 對、PSE 主機板,適用於 8 埠 PSE 系統
子卡
TPS23880EVM-008 適合 IEEE 802.3bt 就緒 PoE PSE 應用的 TPS23880 EVM 子卡 TPS23881EVM-008 適合 IEEE 802.3bt 就緒 PoE PSE 應用的 TPS23881 子卡 TPS23882B1EVM-008 TPS23882B 子卡 type-3、30-W、雙對、八埠系統 PSE TPS23882EVM-008 TPS23882 Type-3、30W、2 對、PSE 子板 (用於 8 埠 PSE 系統)
開發套件
BOOST-PSEMTHR-007 適合 IEEE 802.3bt 就緒 PoE PSE 應用的 TPS2388x 主機板
Gerber 檔案

TPS23880EVM-008 Gerber

SLUC647.ZIP (1643 KB)
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RTQ) 56 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片