FUSION_DIGITAL_POWER_DESIGNER

Digital Power Software

FUSION_DIGITAL_POWER_DESIGNER

Downloads

Overview

Fusion Digital Power™ graphical user interface (GUI) software is used to configure and monitor select Texas Instruments digital power controllers and sequencer/health monitors. The application uses the PMBus protocol to communicate with the device over serial bus by way of a TI USB adapter.

Features

Some of the tasks you can perform with the GUI include:

Turn on or off the power supply output, either through the hardware control line or the PMBus OPERATION command
Monitor real-time data. Items such as input voltage, output voltage, output current, temperature, and warnings/faults are continuously monitored and displayed by the GUI.
Configure the control law accelerator (CLA) coefficients through an interactive design tool
Configure common operating characteristics such as Vout, warning and fault thresholds, and switching frequency

Download View video with transcript Video

Downloads

Application software & framework

FUSION_DIGITAL_POWER_DESIGNER — Digital Power Software

Supported products & hardware

AC/DC & DC/DC controllers (external FET)

TPS40400 — 3-V to 20-V, 30-A, synchronous buck controller with PMBus™, including Telemetry

TPS40422 — Dual Output or Multiphase Synchronous Buck Controller with PMBus

TPS40425 — Dual Output, 2-Phase, Stackable PMBUS Synchronous Buck Driverless Controller

TPS40428 — Dual Output, 2-Phase, Stackable PMBus Synchronous Buck Driverless Controller

TPS53622 — VR13 Dual-Channel D-CAP+™ 2+0/1+1 Step-Down Controller With NVM and PMBus

TPS53647 — 4-Phase, D-CAP+TM Step-Down Buck Controller with NVM and PMBus Interface for ASIC

TPS53659 — 4+1/3+2 Dual-Channel VR13 D-CAP+™ Step-Down Multiphase Controller With NVM and PMBus

TPS53667 — 6-Phase, D-CAP+ step-down driverless buck controller with NVM and PMBus interface for ASIC

TPS53676 — Dual-channel D-CAP+, dual-channel (N+M<= 7 phases) step-down, multiphase controller with AVSBus

TPS53679 — Dual-Channel 6+1/5+2 VR13 D-CAP+™ Step-Down Multiphase Controller With NVM and PMBus

TPS53681 — Dual-Channel 6+2/5+3 D-CAP+TM Multiphase Step-Down Controller with PMBus and NVM

TPS53689T — Dual-channel, 8-phase step-down digital multiphase D-CAP+™ controller with VR14 SVID and PMBus

TPS536C7 — Dual-channel D-CAP+™, PMBus (N+M ≤ 12 phases) step-down, multiphase PWM controller

TPS536C9T — Dual-channel, 12-phase step-down digital multiphase D-CAP+™ controller with VR14 SVID and PMBus

UCD3020 — Fully Programmable Digital Power Controller with up to Two Regulated Outputs and Six DPWM Outputs

UCD3028 — Fully Programmable Digital Power Controller with up to Two Regulated Outputs and Eight DPWM Outputs

UCD3040 — Fully Programmable Digital Power Controller with Four Feedback Loops and Eight DPWM Outputs

UCD7230 — 15.5 V, 2 MHz, 4 A synchronous buck MOSFET™ driver compatible with UCD92xx digital PWM controllers

UCD7230A — 15.5 V, 2 MHz, 4 A synchronous buck MOSFET™ driver compatible with UCD92xx and improved power on

UCD7231 — Digital Control Compatible Synchronous Buck Gate Driver with Current Sense and Fault Protection

UCD7232 — Digital Control Compatible Synchronous-Buck Gate Driver with Current Sense and Fault Protection

UCD7242 — Digital Dual Synchronous Buck Power Driver

UCD74106 — Digital Synchronous Buck Power Driver

UCD9220 — 2MHz, 2 rail, 4 phase digital PWM buck controller

UCD9224 — 2 MHz, 2 rail, 4 phase digital PWM buck controller with improved sequencing

UCD9240 — Digital Point of Load System Controller

UCD9246 — 2MHz, 4 rail, 6 phase digital PWM buck controller

UCD9248 — Digital PWM system controller

AC/DC & DC/DC converters (integrated FET)

TPS53915 — 1.5-V to 18-V, 12-A synchronous SWIFT™ buck converter with PMBus

TPS544B20 — 4.5-V to 18-V, 20-A synchronous SWIFT™ buck converter with PMBus programmability and monitoring

TPS544C20 — 4.5-V to 18-V, 30-A synchronous SWIFT™ buck converter with PMBus programmability and monitoring

TPS544C26 — 4-V to 16-V, 35-A SVID and I²C synchronous step-down converter

TPS546D24A — 2.95-V to 16-V, stackable 40-A synchronous SWIFT™ step-down converter with pin-strapping and PMBus®

TPS548A20 — 1.5-V to 20-V, 15-A synchronous SWIFT™ buck converter

TPS549A20 — 1.5-V to 20-V, 15-A synchronous SWIFT™ buck converter with PMBus

Power modules (integrated inductor)

PTD08A006W — 6A, 4.75V to 14V, Non-Isolated, Digital PowerTrain Module

PTD08A010W — 10A, 4.75V to 14V, Non-Isolated, Digital PowerTrain Module

PTD08A015W — 15A, 4.75 V to 14 V Input, Non-Isolated, Digital PowerTrain Module

PTD08A020W — 20A, 4.75V to 14V, Non-Isolated, Digital PowerTrain Module

PTD08D210W — Dual 10A, 4.75V to 14V, Non-Isolated, Digital PowerTrain Module

TPSM831D31 — 8V-14V input, 120A + 40A dual output PMBus module with AVS and monitoring

TPSM846C23 — 4.5V to 15V Input, 0.35V to 2.0V Output, 35A PMBus Power Module

Sequencers

UCD90120 — 12-Channel Sequencer and System Health Monitor

UCD90120A — 12-Rail Power Supply Sequencer and Monitor with ACPI Support

UCD90124 — 12-Rail Sequencer and System Health Controller with Fan Control

UCD90124A — 12-Rail Sequencer and System Health Monitor with Fan Control and ACPI Support

UCD90160 — 16-Rail Power Supply Sequencer with ACPI Support

UCD90160A — 16-Rail PMBus Power Supply Sequencer and System Manager with ACPI Support

UCD90240 — 24-Rail PMBus Power Sequencer and Power Manager

UCD90320 — 32-Rail PMBus Power Sequencer and System Manager

UCD9090 — 10-Channel Sequencer and System Health Monitor

UCD9090-Q1 — Automotive 10-Channel Sequencer and System Health Monitor

UCD9090A — 10-Rail Power Supply Sequencer and Monitor With ACPI Support

UCD90910 — 10-Rail Sequencer and System Health Monitor with Integrated 10-Channel Fan Controller

Supervisor & reset ICs

TPS389006-Q1 — Automotive multichannel overvoltage and undervoltage I²C programmable voltage supervisor and monitor

Evaluation board

TPS389006Q1EVM — TPS389006 evaluation module for multichannel, overvoltage and undervoltage, I²C voltage supervisor

TPS40422EVM-091 — TPS40422 Dual Output or Multiphase Synchronous Buck Controller Evaluation Module

UCD3138OL40EVM-032 — UCD3138 evaluation module for 40-pin open-loop digital power controller

UCD3138OL64EVM-031 — UCD3138 evaluation module for 64-pin open-loop digital power controller

Daughter card

UCD3138CC64EVM-030 — UCD3138 Programmable Digital Power Controller Control Card Evaluation Module

Download

FUSION_DIGITAL_POWER_DESIGNER — Digital Power Software

close

Latest version

Version: null

Release date: null

open-in-new

View all versions