SRC4184

AKTIV

4-kanaliger asynchroner Abtastfrequenzwandler

Jetzt bestellen

Datenblatt

document-pdfAcrobat 4-Channel, Asynchronous Sample Rate Converter datasheet (Rev. B) (Englisch)

SRC4184

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of SRC channels

4

Digital audio interface

I2S, L, R, TDM

Dynamic range (dB)

128

Digital supply (up to 5 V) (V)

1.65 - 2, 3 - 3.6

THD+N (dB)

-125

Control mode

SW (SPI)

Power supply (V)

1.8, 3.3

Control interface

SPI

Audio data format

I2S, Normal, TDM

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Sampling rate (max) (kHz)

212

Number of SRC channels

4

Digital audio interface

I2S, L, R, TDM

Dynamic range (dB)

128

Digital supply (up to 5 V) (V)

1.65 - 2, 3 - 3.6

THD+N (dB)

-125

Control mode

SW (SPI)

Power supply (V)

1.8, 3.3

Control interface

SPI

Audio data format

I2S, Normal, TDM

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Sampling rate (max) (kHz)

212

TQFP (PAG)

64

144 mm² 12 x 12

AUTOMATIC SENSING OF INPUT-TO-OUTPUT SAMPLING RATIO
WIDE INPUT-TO-OUTPUT SAMPLING RANGE: 16:1 to 1:16
SUPPORTS INPUT AND OUTPUT SAMPLING RATES UP TO 212kHz
DYNAMIC RANGE: 128dB (–60dbFS Input, BW = 20Hz to f_s/2, A-Weighted)
THD+N: –125dB (0dbFS Input, BW = 20Hz to f_s/2)
HIGH-PERFORMANCE, LINEAR PHASE DIGITAL FILTERING
FLEXIBLE AUDIO SERIAL PORTS:
- Master or Slave Mode Operation
- Supports I²S, Left-Justified, Right-Justified, and TDM Data Formats
- TDM Mode Allows Daisy-Chaining of Up to Four Devices
SUPPORTS 24-, 20-, 18-, or 16-BIT INPUT AND OUTPUT DATA
- All Output Data is Dithered from the Internal 28-Bit Data Path
SERIAL PERIPHERAL INTERFACE (SPI)™ PORT SUPPORTS REGISTER READ AND WRITE OPERATIONS IN SOFTWARE MODE
BYPASS MODE
- Routes Input Port Data Directly to the Output Port
FOUR GROUP DELAY OPTIONS FOR THE INTERPOLATION FILTER
DIRECT DOWNSAMPLING OPTION FOR THE DECIMATION FILTER
DIGITAL DE-EMPHASIS FILTER
- User-Selectable for 32kHz, 44.1kHz, and 48kHz Sampling Rates
SOFT MUTE FUNCTION
PROGRAMMABLE DIGITAL OUTPUT ATTENUATION (SOFTWARE MODE ONLY)
- 256 Steps: 0dB to –127.5dB with 0.5dB Steps
INPUT-TO-OUTPUT SAMPLING RATIO READBACK (SOFTWARE MODE ONLY)
POWER-DOWN MODES
SUPPORTS OPERATION FROM A SINGLE +1.8V or +3.3V POWER SUPPLY
AVAILABLE IN A TQFP-64 PACKAGE
APPLICATIONS
- DIGITAL MIXING CONSOLES
- DIGITAL AUDIO WORKSTATIONS
- AUDIO DISTRIBUTION SYSTEMS
- BROADCAST STUDIO EQUIPMENT
- GENERAL DIGITAL AUDIO PROCESSING

U.S. Patent No. 7,262,716.
All trademarks are the property of their respective owners.

AUTOMATIC SENSING OF INPUT-TO-OUTPUT SAMPLING RATIO
WIDE INPUT-TO-OUTPUT SAMPLING RANGE: 16:1 to 1:16
SUPPORTS INPUT AND OUTPUT SAMPLING RATES UP TO 212kHz
DYNAMIC RANGE: 128dB (–60dbFS Input, BW = 20Hz to f_s/2, A-Weighted)
THD+N: –125dB (0dbFS Input, BW = 20Hz to f_s/2)
HIGH-PERFORMANCE, LINEAR PHASE DIGITAL FILTERING
FLEXIBLE AUDIO SERIAL PORTS:
- Master or Slave Mode Operation
- Supports I²S, Left-Justified, Right-Justified, and TDM Data Formats
- TDM Mode Allows Daisy-Chaining of Up to Four Devices
SUPPORTS 24-, 20-, 18-, or 16-BIT INPUT AND OUTPUT DATA
- All Output Data is Dithered from the Internal 28-Bit Data Path
SERIAL PERIPHERAL INTERFACE (SPI)™ PORT SUPPORTS REGISTER READ AND WRITE OPERATIONS IN SOFTWARE MODE
BYPASS MODE
- Routes Input Port Data Directly to the Output Port
FOUR GROUP DELAY OPTIONS FOR THE INTERPOLATION FILTER
DIRECT DOWNSAMPLING OPTION FOR THE DECIMATION FILTER
DIGITAL DE-EMPHASIS FILTER
- User-Selectable for 32kHz, 44.1kHz, and 48kHz Sampling Rates
SOFT MUTE FUNCTION
PROGRAMMABLE DIGITAL OUTPUT ATTENUATION (SOFTWARE MODE ONLY)
- 256 Steps: 0dB to –127.5dB with 0.5dB Steps
INPUT-TO-OUTPUT SAMPLING RATIO READBACK (SOFTWARE MODE ONLY)
POWER-DOWN MODES
SUPPORTS OPERATION FROM A SINGLE +1.8V or +3.3V POWER SUPPLY
AVAILABLE IN A TQFP-64 PACKAGE
APPLICATIONS
- DIGITAL MIXING CONSOLES
- DIGITAL AUDIO WORKSTATIONS
- AUDIO DISTRIBUTION SYSTEMS
- BROADCAST STUDIO EQUIPMENT
- GENERAL DIGITAL AUDIO PROCESSING

U.S. Patent No. 7,262,716.
All trademarks are the property of their respective owners.

The SRC4184 is a four-channel, asynchronous sample rate converter (ASRC), designed for professional and broadcast audio applications. The SRC4184 combines a wide input-to-output sampling ratio with outstanding dynamic range and ultra low distortion. The input and output serial ports support the most common audio data formats, as well as a time division multiplexed (TDM) format. This allows the SRC4184 to interface to a wide range of audio data converters, digital audio receivers and transmitters, and digital signal processors.

The SRC4184 may be operated in Hardware mode as a standalone pin-programmed device, with dedicated control pins for serial port mode, audio data format, soft mute, bypass, and digital filtering functions. Alternatively, the SRC4184 may be operated in Software mode, where a four-wire serial peripheral interface (SPI) port provides access to internal control and status registers.

The SRC4184 operates from either a +1.8V core supply or a +3.3V core supply. When operating from +3.3V, the +1.8V required by the core logic is derived from an internal voltage regulator. The SRC4184 also requires a digital I/O supply, which operates from +1.65V to +3.6V. The SRC4184 is available in a TQFP-64 package.

The SRC4184 is a four-channel, asynchronous sample rate converter (ASRC), designed for professional and broadcast audio applications. The SRC4184 combines a wide input-to-output sampling ratio with outstanding dynamic range and ultra low distortion. The input and output serial ports support the most common audio data formats, as well as a time division multiplexed (TDM) format. This allows the SRC4184 to interface to a wide range of audio data converters, digital audio receivers and transmitters, and digital signal processors.

The SRC4184 may be operated in Hardware mode as a standalone pin-programmed device, with dedicated control pins for serial port mode, audio data format, soft mute, bypass, and digital filtering functions. Alternatively, the SRC4184 may be operated in Software mode, where a four-wire serial peripheral interface (SPI) port provides access to internal control and status registers.

The SRC4184 operates from either a +1.8V core supply or a +3.3V core supply. When operating from +3.3V, the +1.8V required by the core logic is derived from an internal voltage regulator. The SRC4184 also requires a digital I/O supply, which operates from +1.65V to +3.6V. The SRC4184 is available in a TQFP-64 package.

filter

Andere Abtastratenwandler suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

	Typ	Titel		Datum
*	Data sheet	4-Channel, Asynchronous Sample Rate Converter datasheet (Rev. B)		13 Sep 2007

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
TQFP (PAG)	64	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

SRC4184

4-kanaliger asynchroner Abtastfrequenzwandler

SRC4184

Produktdetails

Technische Dokumentation

Design und Entwicklung

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos