Startseite Energiemanagement Mehrkanal-ICs (PMICs)
Startseite
Energiemanagement
Mehrkanal-ICs (PMICs)

TPS65090

AKTIV

Power-Management-IC (PMIC), 6 bis 7 V, mit Switchmode-Lader, 3 DCDCs, 2 LDOs und 7 Lastschaltern

Jetzt bestellen
Datenblatt

TPS65090

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Regulated outputs (#) 5 Step-down DC/DC converter 3 Step-up DC/DC converter 0 LDO 2 Vin (min) (V) 6 Vin (max) (V) 17 Vout (min) (V) 1 Vout (max) (V) 5 Iout (max) (A) 5 Configurability Factory programmable, Software configurable Features Comm control, Power good Rating Catalog Operating temperature range (°C) -40 to 85 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Switching frequency (max) (kHz) 1840 Shutdown current (ISD) (typ) (µA) 1 Switching frequency (typ) (kHz) 1600 Product type Processor and FPGA
Regulated outputs (#) 5 Step-down DC/DC converter 3 Step-up DC/DC converter 0 LDO 2 Vin (min) (V) 6 Vin (max) (V) 17 Vout (min) (V) 1 Vout (max) (V) 5 Iout (max) (A) 5 Configurability Factory programmable, Software configurable Features Comm control, Power good Rating Catalog Operating temperature range (°C) -40 to 85 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Switching frequency (max) (kHz) 1840 Shutdown current (ISD) (typ) (µA) 1 Switching frequency (typ) (kHz) 1600 Product type Processor and FPGA
VQFN-MR (RVN) 100 See data sheet
  • Wide Input Voltage Charger and Power Path
    Management:
    • VIN Range From 6 V to 17 V
    • Up to 4-A Output Current on the Power Path
    • Switched-Mode Charger; up to 4-A Maximum
      Charge Current
    • JEITA Compliant Charging Control
    • Thermal Regulation, Safety Timers
    • 2 Temperature Sense Inputs
  • 3 Step-Down Converters:
    • High Efficiency Over a Wide Output Current
      Range
    • VIN Range From 6 V to 17 V
    • 2 Fixed Output Voltages (5 V and 3.3 V)
      • Up to 5 A of Continuous Output Current
    • 1 Adjustable Output Voltage (From 1 V to 5 V)
      • Up to 4 A of Continuous Output Current
    • Output Voltage Accuracy ±1%
    • Typical 30-µA Quiescent Current Per
      Converter
  • 2 Always-On LDOs:
    • 2 Fixed Output Voltages (5 V and 3.3 V)
    • Output Voltage Accuracy ±1%
    • Typical 10-µA Quiescent Current per LDO
  • 7 Current-Limited Load Switches:
    • One System Voltage Switch With 1-A Current
      Limit
    • One 5-V Switch With 200-mA Current Limit,
      Reverse-Voltage Protected
    • One 3.3-V Switch With 3-A Current Limit
    • Four 3.3-V Switches With 1-A Current Limit
    • All Switches Controlled by I2C Interface
  • I2C Interface
    • Standard-Mode (100 kHz) Supported
    • Fast-Mode (400 kHz) Supported
    • Fast-Mode Plus (1000 kHz) Supported
    • High-Speed (3.4 MHz) Supported
  • 16-Channel, 10-Bit Analog-to-Digital Converter
    (ADC)
  • Available in a 9-mm × 9-mm, VQFN-100 Package
  • Wide Input Voltage Charger and Power Path
    Management:
    • VIN Range From 6 V to 17 V
    • Up to 4-A Output Current on the Power Path
    • Switched-Mode Charger; up to 4-A Maximum
      Charge Current
    • JEITA Compliant Charging Control
    • Thermal Regulation, Safety Timers
    • 2 Temperature Sense Inputs
  • 3 Step-Down Converters:
    • High Efficiency Over a Wide Output Current
      Range
    • VIN Range From 6 V to 17 V
    • 2 Fixed Output Voltages (5 V and 3.3 V)
      • Up to 5 A of Continuous Output Current
    • 1 Adjustable Output Voltage (From 1 V to 5 V)
      • Up to 4 A of Continuous Output Current
    • Output Voltage Accuracy ±1%
    • Typical 30-µA Quiescent Current Per
      Converter
  • 2 Always-On LDOs:
    • 2 Fixed Output Voltages (5 V and 3.3 V)
    • Output Voltage Accuracy ±1%
    • Typical 10-µA Quiescent Current per LDO
  • 7 Current-Limited Load Switches:
    • One System Voltage Switch With 1-A Current
      Limit
    • One 5-V Switch With 200-mA Current Limit,
      Reverse-Voltage Protected
    • One 3.3-V Switch With 3-A Current Limit
    • Four 3.3-V Switches With 1-A Current Limit
    • All Switches Controlled by I2C Interface
  • I2C Interface
    • Standard-Mode (100 kHz) Supported
    • Fast-Mode (400 kHz) Supported
    • Fast-Mode Plus (1000 kHz) Supported
    • High-Speed (3.4 MHz) Supported
  • 16-Channel, 10-Bit Analog-to-Digital Converter
    (ADC)
  • Available in a 9-mm × 9-mm, VQFN-100 Package

The TPS65090A device is a single-chip power management IC for portable applications consisting of a battery charger with power path management for a dual or triple Li-Ion or Li-Polymer cell battery pack. The charger can be directly connected to an external wall adapter. Three highly efficient step-down converters are targeted for providing a fixed 5-V system voltage, a fixed 3.3-V system voltage, and an adjustable voltage rail. The step-down converters enter a low power mode at light load for maximum efficiency across the widest possible range of load currents. The step-down converters allow the use of small inductors and capacitors to achieve a small solution size. The TPS65090A also integrates two general-purpose always-on LDOs for powering circuit blocks which control the system while shut down. Each LDO operates with an input voltage range from 6 V to 17 V, allowing the LDOs to be supplied from the wall adapter or directly from the main battery pack.

Seven load switches are built into the device. These load switches can be used to control the power supply individually for certain circuit blocks in the application circuit. The current flowing through the load switches, as well as the output current of the step-down converters, the input current from the AC adapter and the charge current is monitored and can be read out using the digital interface.

For all available packages, see the orderable addendum at the end of the data sheet.

The TPS65090A device is a single-chip power management IC for portable applications consisting of a battery charger with power path management for a dual or triple Li-Ion or Li-Polymer cell battery pack. The charger can be directly connected to an external wall adapter. Three highly efficient step-down converters are targeted for providing a fixed 5-V system voltage, a fixed 3.3-V system voltage, and an adjustable voltage rail. The step-down converters enter a low power mode at light load for maximum efficiency across the widest possible range of load currents. The step-down converters allow the use of small inductors and capacitors to achieve a small solution size. The TPS65090A also integrates two general-purpose always-on LDOs for powering circuit blocks which control the system while shut down. Each LDO operates with an input voltage range from 6 V to 17 V, allowing the LDOs to be supplied from the wall adapter or directly from the main battery pack.

Seven load switches are built into the device. These load switches can be used to control the power supply individually for certain circuit blocks in the application circuit. The current flowing through the load switches, as well as the output current of the step-down converters, the input current from the AC adapter and the charge current is monitored and can be read out using the digital interface.

For all available packages, see the orderable addendum at the end of the data sheet.
filter Andere Mehrkanal-ICs (PMICs) suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 11
Typ Titel Datum
* Data sheet TPS65090 Front-End PMU With Switched-Mode Charger for 2 to 3 Cells In Series datasheet (Rev. B) PDF | HTML 13 Jul 2015
Application note How to Design Flexible Processor Power Systems Using PMICs (Rev. B) 27 Jan 2020
Application note Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 11 Dez 2018
Selection guide Power Management Guide 2018 (Rev. R) 25 Jun 2018
Application note Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. B) 29 Nov 2017
Application note Basic Calculation of a Buck Converter's Power Stage (Rev. B) 17 Aug 2015
EVM User's guide TPS65090EVM User's Guide (Rev. A) 09 Jan 2013
Application note Conserving Battery Life when Connecting the TPS65090 to an Unpowered AC Adapter 13 Dez 2012
Application note How to Measure the Control Loop of DCS-Control Devices (Rev. A) 09 Aug 2012
Analog Design Journal Design considerations for a resistive feedback divider in a DC/DC converter 26 Apr 2012
Application note Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) 13 Jan 2012

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS65090EVM — Frontend-PMU mit Switchmode-Ladegerät für 2-3 Zellen in Serie Evaluierungsmodul-Platine

TPS65090EVM Frontend PMU With Switchmode Charger for 2-3 Cells In Series Evaluation Module Board

An evaluation module for Texas Instruments TPS65090, Frontend Power Management integrated circuit. The EVM allows for evaluation of the TPS65090 integrated high-input voltage (6V-17V) charger/power (...)
Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Treiber oder Bibliothek

TPS65090SW-LINUX — Linux-Treiber für TPS65090

The Linux driver supports the TPS65090 Power Management IC. The Linux driver supports communication through the I2C bus and interfaces with the Regulator and Power sub-system.

 

Linux Mainline Status

Available in Linux Main line: Yes
Available through git.ti.com: N/A

Supported Devices:

  • tps65090

 

Linux (...)

View Options
GUI für Evaluierungsmodul (EVM)

IPG-UI — IPG-UI EVM GUI (Windows Installer)

The IPG-UI GUI can be used to configure multiple PMIC devices to evaluate the features and performance of those devices.  This GUI is built using web-based technologies and supports interacting with the EVM hardware using a USB2ANY adapter board. The USB2ANY Explorer is provided to allow (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Mehrkanal-ICs (PMICs)
TPS65020 — 6-kanaliger Power-Management-IC (PMIC) mit 3 DC/DC-Wandlern, 3 LDOs, I2C-Schnittstelle und dynamisch TPS65023 — Power-Management-IC (PMIC) mit 3 DC/DC-Wandlern, 3 LDOs, I2C-Schnittstelle und DVS TPS65023B — 6-kanaliger Power-Management-IC (PMIC) mit 3 DC/DC-Wandlern, 3 LDOs, I2C-Schnittstelle und DVS TPS65055 — Zweifach-Abwärtswandler, 2,25 MHz, mit 4 LDOs mit niedriger Eingangsspannung TPS65084 — Programmierbarer Power-Management-IC (PMIC), mittlerer Eingangsspannungsbereich, für Braswell-Prozes TPS65086 — Konfigurierbarer Multi-Rail-PMIC für batteriebetriebene Geräte mit 2S und 3S Li-Ionen-Akkus oder nic TPS650861 — Benutzerprogrammierbarer 3-Wandler, 3-Controller, 4-LDO und 3-Lastschalter Power-Management-IC (PMIC TPS65090 — Power-Management-IC (PMIC), 6 bis 7 V, mit Switchmode-Lader, 3 DCDCs, 2 LDOs und 7 Lastschaltern TPS65094 — Programmierbarer Power-Management-IC (PMIC), mittlerer Eingangsspannungsbereich, für Apollo-Lake-Pro TPS65217 — Power-Management-IC (PMIC) mit 3 DC/DC-Wandlern, 4 LDOs, linearem Batterielader & Treiber für weiße TPS652170 — Benutzerprogrammierbarer Power-Management-IC (PMIC) mit 3 DC/DCs, 4 LDOs, Batterielader und LED-Trei TPS65218 — Power-Management-IC (PMIC) für ARM Cortex-A8/A9 SoCs und FPGA TPS6521815 — Benutzerprogrammierbarer Power-Management-IC (PMIC) mit 6 DC/DC-Wandlern, 1 LDO und 3 Lastschaltern TPS65218D0 — Integriertes Power-Management (PMIC) für ARM® Cortex™-A8/A9 SOCs und FPGAs TPS657095 — Eingebetteter Kameramodul-PMIC TPS65910 — Integrierter Power-Management-IC (PMIC) mit 4 DC/DCs, 8 LDOs und RTC in QFN-Familie 6 x 6 mm TPS65911 — Integrierter Power-Management-IC (PMIC) mit 4 DC/DCs, 9 LDOs und Echtzeituhr TPS65912 — Power-Management-IC (PMIC) mit 4 DC/DC-Wandlern, 10 LDOs, 3 LED-Ausgängen & RC-Oszillator, 32 KHz TPS659128 — PMU für Prozessorleistung
Hardware-Entwicklung
Evaluierungsplatine
BOOSTXL-TPS650861 — TPS650861 Boosterpack zur Kundenprogrammierung TPS65023BEVM-664 — TPS65023B-Evaluierungsmodul TPS65023EVM-205 — TPS65023-Evaluierungsmodul TPS650860EVM-116 — TPS650860-Evaluierungsmodul TPS65218EVM-100 — TPS65218-Evaluierungsmodul
Software
GUI für Evaluierungsmodul (EVM)
IPG-UI — IPG-UI-EVM-GUI
Herunterladen
GUI für Evaluierungsmodul (EVM)

SLVC469 — TPS6509xEVM Software – Legacy

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Mehrkanal-ICs (PMICs)
TPS65090 — Power-Management-IC (PMIC), 6 bis 7 V, mit Switchmode-Lader, 3 DCDCs, 2 LDOs und 7 Lastschaltern
Hardware-Entwicklung
Evaluierungsplatine
TPS65090EVM — Frontend-PMU mit Switchmode-Ladegerät für 2-3 Zellen in Serie Evaluierungsmodul-Platine
Herunterladen
Gerberdatei

TPS65090EVM Gerber Files

SLVC472.ZIP (1069 KB)
Herunterladen
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFN-MR (RVN) 100 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos