Startseite Energiemanagement Mehrkanal-ICs (PMICs)

TPS65094

AKTIV

Programmierbarer Power-Management-IC (PMIC), mittlerer Eingangsspannungsbereich, für Apollo-Lake-Pro

Produktdetails

Processor supplier Intel/Altera Processor name Apollo Lake Regulated outputs (#) 12 Step-down DC/DC converter 3 Step-up DC/DC converter 0 LDO 4 Vin (min) (V) 5.6 Vin (max) (V) 21 Vout (min) (V) -0.3 Vout (max) (V) 3.575 Iout (max) (A) 21 Configurability Factory programmable, Software configurable Features Comm control, Dynamic voltage scaling, Enable, Enable pin, I2C control, Overcurrent protection, Power good, Power sequencing, Synchronous rectification, Thermal shutdown, UVLO fixed Rating Catalog Operating temperature range (°C) -40 to 85 Step-down DC/DC controller 3 Step-up DC/DC controller 0 Iq (typ) (mA) 0.3 Switching frequency (max) (kHz) 3100 Shutdown current (ISD) (typ) (µA) 65 Switching frequency (typ) (kHz) 2500 Product type Processor and FPGA
Processor supplier Intel/Altera Processor name Apollo Lake Regulated outputs (#) 12 Step-down DC/DC converter 3 Step-up DC/DC converter 0 LDO 4 Vin (min) (V) 5.6 Vin (max) (V) 21 Vout (min) (V) -0.3 Vout (max) (V) 3.575 Iout (max) (A) 21 Configurability Factory programmable, Software configurable Features Comm control, Dynamic voltage scaling, Enable, Enable pin, I2C control, Overcurrent protection, Power good, Power sequencing, Synchronous rectification, Thermal shutdown, UVLO fixed Rating Catalog Operating temperature range (°C) -40 to 85 Step-down DC/DC controller 3 Step-up DC/DC controller 0 Iq (typ) (mA) 0.3 Switching frequency (max) (kHz) 3100 Shutdown current (ISD) (typ) (µA) 65 Switching frequency (typ) (kHz) 2500 Product type Processor and FPGA
VQFN (RSK) 64 64 mm² 8 x 8
  • Wide VIN range from 5.6V to 21V
  • Three variable-output voltage synchronous Step-down controllers With D-CAP2™ topology
    • 5A for BUCK1 (VNN), 7A for BUCK6 (VDDQ), and 21A for BUCK2 (VCCGI) using external FETs for typical applications
    • I2C dynamic voltage scaling (DVS) control (0.5V to 1.45V in 10mV Steps) for BUCK1 and BUCK2
    • OTP-Programmable default output voltage for BUCK6 (VDDQ)
  • Three variable-output voltage synchronous Step-down converters with dcs-control topology and I2C DVS capabilities
    • VIN range from 4.5V to 5.5V
    • 3A of output current for BUCK3 (VCCRAM)
    • 2A of output current for BUCK4 (V1P8A) and BUCK5 (V1P24A) for typical applications
  • Three LDO regulators with adjustable output voltage
    • LDOA1: I2C-Selectable output voltage from 1.35V to 3.3V for up to 200mA of output current
    • LDOA2 and LDOA3: I2C-Selectable output voltage from 0.7V to 1.5V for up to 600mA of output current
  • VTT LDO for DDR memory termination
  • Three load switches with slew rate control
    • Up to 400mA of output current with voltage drop less than 1.5% of nominal input voltage
    • RDSON < 96mΩ at input voltage of 1.8V
  • I2C Interface (device address 0x5E) supports:
    • Standard mode (100kHz)
    • Fast mode (400kHz)
    • Fast mode plus (1MHz)
  • Wide VIN range from 5.6V to 21V
  • Three variable-output voltage synchronous Step-down controllers With D-CAP2™ topology
    • 5A for BUCK1 (VNN), 7A for BUCK6 (VDDQ), and 21A for BUCK2 (VCCGI) using external FETs for typical applications
    • I2C dynamic voltage scaling (DVS) control (0.5V to 1.45V in 10mV Steps) for BUCK1 and BUCK2
    • OTP-Programmable default output voltage for BUCK6 (VDDQ)
  • Three variable-output voltage synchronous Step-down converters with dcs-control topology and I2C DVS capabilities
    • VIN range from 4.5V to 5.5V
    • 3A of output current for BUCK3 (VCCRAM)
    • 2A of output current for BUCK4 (V1P8A) and BUCK5 (V1P24A) for typical applications
  • Three LDO regulators with adjustable output voltage
    • LDOA1: I2C-Selectable output voltage from 1.35V to 3.3V for up to 200mA of output current
    • LDOA2 and LDOA3: I2C-Selectable output voltage from 0.7V to 1.5V for up to 600mA of output current
  • VTT LDO for DDR memory termination
  • Three load switches with slew rate control
    • Up to 400mA of output current with voltage drop less than 1.5% of nominal input voltage
    • RDSON < 96mΩ at input voltage of 1.8V
  • I2C Interface (device address 0x5E) supports:
    • Standard mode (100kHz)
    • Fast mode (400kHz)
    • Fast mode plus (1MHz)

The TPS65094 device is a single-chip solution, power-management integrated chip (PMIC) designed specifically for the latest Intel™ processors targeted for tablets, ultrabooks, notebooks, industrial PCs, and Internet-of-Things (IOT) applications using 2S, 3S, or 4S Li-Ion battery packs (NVDC or non-NVDC power architectures), as well as wall-powered applications. The TPS65094 device is used for essential systems with low-voltage rails merged for the smallest footprint and lowest-cost system-power solution. The TPS65094 device provides the complete power solution based on the Intel Reference Designs. Six highly efficient step-down voltage regulators (VRs), a sink or source LDO (VTT), and a load switch are controlled by power-up sequence logic to provide the proper power rails, sequencing, and protection—including DDR3 and DDR4 memory power. The two regulators (BUCK1 and BUCK2) support dynamic voltage scaling (DVS) for maximum efficiency—including support for connected standby. The high-frequency VRs use small inductors and capacitors to achieve a small solution size. An I2C interface allows simple control by an embedded controller (EC) or by a system on chip (SoC).

The PMIC comes in an 8mm × 8mm single-row VQFN package with a thermal pad for good thermal dissipation and ease of board routing.

The TPS65094 device is a single-chip solution, power-management integrated chip (PMIC) designed specifically for the latest Intel™ processors targeted for tablets, ultrabooks, notebooks, industrial PCs, and Internet-of-Things (IOT) applications using 2S, 3S, or 4S Li-Ion battery packs (NVDC or non-NVDC power architectures), as well as wall-powered applications. The TPS65094 device is used for essential systems with low-voltage rails merged for the smallest footprint and lowest-cost system-power solution. The TPS65094 device provides the complete power solution based on the Intel Reference Designs. Six highly efficient step-down voltage regulators (VRs), a sink or source LDO (VTT), and a load switch are controlled by power-up sequence logic to provide the proper power rails, sequencing, and protection—including DDR3 and DDR4 memory power. The two regulators (BUCK1 and BUCK2) support dynamic voltage scaling (DVS) for maximum efficiency—including support for connected standby. The high-frequency VRs use small inductors and capacitors to achieve a small solution size. An I2C interface allows simple control by an embedded controller (EC) or by a system on chip (SoC).

The PMIC comes in an 8mm × 8mm single-row VQFN package with a thermal pad for good thermal dissipation and ease of board routing.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 5
Typ Titel Datum
* Data sheet TPS65094 PMIC for Intel™ Apollo Lake Platform datasheet (Rev. F) PDF | HTML 30 Jan 2025
EVM User's guide TPS65094x Evaluation Module User's Guide (Rev. A) 26 Jul 2017
Application note TPS65094x Schematic Checklist, Layout Checklist, and ILIM Calculator tool (Rev. A) 20 Jan 2017
User guide TPS65094x Design Guide 29 Aug 2015
White paper Power management integrated buck controllers for distant point-of-load apps 14 Aug 2015

Design und Entwicklung

Lösungen für die Stromversorgung

Lösungen erkunden, die den TPS65094 umfassen. TI bietet Stromversorgungslösungen für Ein-Chip-Systeme (SoCs), Prozessoren, Mikrocontroller, Sensoren und feldprogrammierbare Gate-Arrays (FPGAs) von TI und von Fremdherstellern an.

Evaluierungsplatine

TPS650941EVM-116 — TPS65094x-Evaluierungsmodul

The TPS650941EVM-116 demonstrates the integrated circuit TPS65094 from Texas Instruments.

The TPS65094 device is a single-chip solution, power-management IC designed specifically for the latest Intel™ processors targeted for tablets, ultrabooks, and notebooks with NVDC or non-NVDC power (...)

Benutzerhandbuch: PDF
GUI für Evaluierungsmodul (EVM)

IPG-UI IPG-UI EVM GUI (Windows Installer)

The IPG-UI GUI can be used to configure multiple PMIC devices to evaluate the features and performance of those devices.  This GUI is built using web-based technologies and supports interacting with the EVM hardware using a USB2ANY adapter board. The USB2ANY Explorer is provided to allow (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Mehrkanal-ICs (PMICs)
TPS65020 6-kanaliger Power-Management-IC (PMIC) mit 3 DC/DC-Wandlern, 3 LDOs, I2C-Schnittstelle und dynamisch TPS65023 Power-Management-IC (PMIC) mit 3 DC/DC-Wandlern, 3 LDOs, I2C-Schnittstelle und DVS TPS65023B 6-kanaliger Power-Management-IC (PMIC) mit 3 DC/DC-Wandlern, 3 LDOs, I2C-Schnittstelle und DVS TPS65055 Zweifach-Abwärtswandler, 2,25 MHz, mit 4 LDOs mit niedriger Eingangsspannung TPS65084 Programmierbarer Power-Management-IC (PMIC), mittlerer Eingangsspannungsbereich, für Braswell-Prozes TPS65086 Konfigurierbarer Multi-Rail-PMIC für batteriebetriebene Geräte mit 2S und 3S Li-Ionen-Akkus oder nic TPS650861 Benutzerprogrammierbarer 3-Wandler, 3-Controller, 4-LDO und 3-Lastschalter Power-Management-IC (PMIC TPS65090 Power-Management-IC (PMIC), 6 bis 7 V, mit Switchmode-Lader, 3 DCDCs, 2 LDOs und 7 Lastschaltern TPS65094 Programmierbarer Power-Management-IC (PMIC), mittlerer Eingangsspannungsbereich, für Apollo-Lake-Pro TPS65217 Power-Management-IC (PMIC) mit 3 DC/DC-Wandlern, 4 LDOs, linearem Batterielader & Treiber für weiße TPS652170 Benutzerprogrammierbarer Power-Management-IC (PMIC) mit 3 DC/DCs, 4 LDOs, Batterielader und LED-Trei TPS65218 Power-Management-IC (PMIC) für ARM Cortex-A8/A9 SoCs und FPGA TPS6521815 Benutzerprogrammierbarer Power-Management-IC (PMIC) mit 6 DC/DC-Wandlern, 1 LDO und 3 Lastschaltern TPS65218D0 Integriertes Power-Management (PMIC) für ARM® Cortex™-A8/A9 SOCs und FPGAs TPS657095 Eingebetteter Kameramodul-PMIC TPS65910 Integrierter Power-Management-IC (PMIC) mit 4 DC/DCs, 8 LDOs und RTC in QFN-Familie 6 x 6 mm TPS65911 Integrierter Power-Management-IC (PMIC) mit 4 DC/DCs, 9 LDOs und Echtzeituhr TPS65912 Power-Management-IC (PMIC) mit 4 DC/DC-Wandlern, 10 LDOs, 3 LED-Ausgängen & RC-Oszillator, 32 KHz TPS659128 PMU für Prozessorleistung
Hardware-Entwicklung
Evaluierungsplatine
BOOSTXL-TPS650861 TPS650861 Boosterpack zur Kundenprogrammierung TPS65023BEVM-664 TPS65023B-Evaluierungsmodul TPS65023EVM-205 TPS65023-Evaluierungsmodul TPS650860EVM-116 TPS650860-Evaluierungsmodul TPS65218EVM-100 TPS65218-Evaluierungsmodul
Software
GUI für Evaluierungsmodul (EVM)
IPG-UI IPG-UI-EVM-GUI
GUI für Evaluierungsmodul (EVM)

IPG-UI-LINUX IPG-UI EVM GUI (Linux Installer)

The IPG-UI GUI can be used to configure multiple PMIC devices to evaluate the features and performance of those devices.  This GUI is built using web-based technologies and supports interacting with the EVM hardware using a USB2ANY adapter board. The USB2ANY Explorer is provided to allow (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Mehrkanal-ICs (PMICs)
TPS65023B 6-kanaliger Power-Management-IC (PMIC) mit 3 DC/DC-Wandlern, 3 LDOs, I2C-Schnittstelle und DVS TPS65084 Programmierbarer Power-Management-IC (PMIC), mittlerer Eingangsspannungsbereich, für Braswell-Prozes TPS65086 Konfigurierbarer Multi-Rail-PMIC für batteriebetriebene Geräte mit 2S und 3S Li-Ionen-Akkus oder nic TPS650861 Benutzerprogrammierbarer 3-Wandler, 3-Controller, 4-LDO und 3-Lastschalter Power-Management-IC (PMIC TPS65094 Programmierbarer Power-Management-IC (PMIC), mittlerer Eingangsspannungsbereich, für Apollo-Lake-Pro TPS652170 Benutzerprogrammierbarer Power-Management-IC (PMIC) mit 3 DC/DCs, 4 LDOs, Batterielader und LED-Trei TPS6521815 Benutzerprogrammierbarer Power-Management-IC (PMIC) mit 6 DC/DC-Wandlern, 1 LDO und 3 Lastschaltern TPS65218D0 Integriertes Power-Management (PMIC) für ARM® Cortex™-A8/A9 SOCs und FPGAs TPS657095 Eingebetteter Kameramodul-PMIC TPS659128 PMU für Prozessorleistung
Hardware-Entwicklung
Evaluierungsplatine
TPS65023BEVM-664 TPS65023B-Evaluierungsmodul TPS65023EVM-205 TPS65023-Evaluierungsmodul TPS650860EVM-116 TPS650860-Evaluierungsmodul TPS65218EVM-100 TPS65218-Evaluierungsmodul
Software
GUI für Evaluierungsmodul (EVM)
IPG-UI IPG-UI-EVM-GUI
GUI für Evaluierungsmodul (EVM)

IPG-UI-OSX IPG-UI EVM GUI (OSX Installer)

The IPG-UI GUI can be used to configure multiple PMIC devices to evaluate the features and performance of those devices.  This GUI is built using web-based technologies and supports interacting with the EVM hardware using a USB2ANY adapter board. The USB2ANY Explorer is provided to allow (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Mehrkanal-ICs (PMICs)
TPS65023B 6-kanaliger Power-Management-IC (PMIC) mit 3 DC/DC-Wandlern, 3 LDOs, I2C-Schnittstelle und DVS TPS65084 Programmierbarer Power-Management-IC (PMIC), mittlerer Eingangsspannungsbereich, für Braswell-Prozes TPS65086 Konfigurierbarer Multi-Rail-PMIC für batteriebetriebene Geräte mit 2S und 3S Li-Ionen-Akkus oder nic TPS650861 Benutzerprogrammierbarer 3-Wandler, 3-Controller, 4-LDO und 3-Lastschalter Power-Management-IC (PMIC TPS65094 Programmierbarer Power-Management-IC (PMIC), mittlerer Eingangsspannungsbereich, für Apollo-Lake-Pro TPS652170 Benutzerprogrammierbarer Power-Management-IC (PMIC) mit 3 DC/DCs, 4 LDOs, Batterielader und LED-Trei TPS6521815 Benutzerprogrammierbarer Power-Management-IC (PMIC) mit 6 DC/DC-Wandlern, 1 LDO und 3 Lastschaltern TPS65218D0 Integriertes Power-Management (PMIC) für ARM® Cortex™-A8/A9 SOCs und FPGAs TPS657095 Eingebetteter Kameramodul-PMIC TPS659128 PMU für Prozessorleistung
Hardware-Entwicklung
Evaluierungsplatine
TPS65023BEVM-664 TPS65023B-Evaluierungsmodul TPS65023EVM-205 TPS65023-Evaluierungsmodul TPS650860EVM-116 TPS650860-Evaluierungsmodul TPS65218EVM-100 TPS65218-Evaluierungsmodul
Software
GUI für Evaluierungsmodul (EVM)
IPG-UI IPG-UI-EVM-GUI
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFN (RSK) 64 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos