Inicio Amplificadores Amplificadores operacionales (op amps) Amplificadores operacionales de alta velocidad (GBW ≥ 50 MHz)
Inicio
Amplificadores
Amplificadores operacionales (op amps)
Amplificadores operacionales de alta velocidad (GBW ≥ 50 MHz)

LMH6640

NO RECOMENDADO PARA NUEVOS DISEÑOS

Amplificador operacional TFT-LCD simple de 16 V con salida alta de carril a carril

Haga su pedido ahora
Hoja de datos
LMH6640 no se recomienda para nuevos diseños
Aunque esta producto sigue en producción para dar soporte a diseños anteriores, no lo recomendamos para nuevos diseños. Considere una de estas alternativas:
open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
LMH6642 ACTIVO Amplificador de canal único, baja potencia, 130 MHz y 75 mA con salida de carril a carril INA121 has lower offset and higher CMRR, with half the power consumption

LMH6640

NO RECOMENDADO PARA NUEVOS DISEÑOS
Hoja de datos Haga su pedido ahora

Detalles del producto

Architecture Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4.5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 16 GBW (typ) (MHz) 190 BW at Acl (MHz) 190 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 170 Vn at flatband (typ) (nV√Hz) 15 Vn at 1 kHz (typ) (nV√Hz) 10 Iq per channel (typ) (mA) 4 Vos (offset voltage at 25°C) (max) (mV) 1 Rail-to-rail In to V-, Out Features C-Load Drive Rating Catalog Operating temperature range (°C) to CMRR (typ) (dB) 90 Input bias current (max) (pA) 2600000 Offset drift (typ) (µV/°C) 0 Iout (typ) (mA) 110 2nd harmonic (dBc) 71 3rd harmonic (dBc) 72 Frequency of harmonic distortion measurement (MHz) 5
Architecture Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4.5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 16 GBW (typ) (MHz) 190 BW at Acl (MHz) 190 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 170 Vn at flatband (typ) (nV√Hz) 15 Vn at 1 kHz (typ) (nV√Hz) 10 Iq per channel (typ) (mA) 4 Vos (offset voltage at 25°C) (max) (mV) 1 Rail-to-rail In to V-, Out Features C-Load Drive Rating Catalog Operating temperature range (°C) to CMRR (typ) (dB) 90 Input bias current (max) (pA) 2600000 Offset drift (typ) (µV/°C) 0 Iout (typ) (mA) 110 2nd harmonic (dBc) 71 3rd harmonic (dBc) 72 Frequency of harmonic distortion measurement (MHz) 5
SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8
  • (VS = 16V, RL= 2 kΩ to V+/2, 25°C, Typical Values Unless Specified)
  • Supply current (no load) 4 mA
  • Output resistance (closed loop 1 MHz) 0.35Ω
  • −3 dB BW (AV = 1) 190 MHz
  • Settling time (±0.1%, 2 VPP) 35 ns
  • Input common mode voltage −0.3V to 15.1V
  • Output voltage swing 100 mV from rails
  • Linear output current ±100 mA
  • Total harmonic distortion (2 VPP, 5 MHz) −64 dBc
  • Fully characterized for: 5V & 16V
  • No output phase reversal with CMVR exceeded
  • Differential gain (RL = 150Ω) 0.12%
  • Differential phase (RL = 150Ω) 0.12°

All trademarks are the property of their respective owners.

  • (VS = 16V, RL= 2 kΩ to V+/2, 25°C, Typical Values Unless Specified)
  • Supply current (no load) 4 mA
  • Output resistance (closed loop 1 MHz) 0.35Ω
  • −3 dB BW (AV = 1) 190 MHz
  • Settling time (±0.1%, 2 VPP) 35 ns
  • Input common mode voltage −0.3V to 15.1V
  • Output voltage swing 100 mV from rails
  • Linear output current ±100 mA
  • Total harmonic distortion (2 VPP, 5 MHz) −64 dBc
  • Fully characterized for: 5V & 16V
  • No output phase reversal with CMVR exceeded
  • Differential gain (RL = 150Ω) 0.12%
  • Differential phase (RL = 150Ω) 0.12°

All trademarks are the property of their respective owners.

The LMH6640 is a voltage feedback operational amplifier with a rail-to-rail output drive capability of 100 mA. Employing TI’s patented VIP10 process, the LMH6640 delivers a bandwidth of 190 MHz at a current consumption of only 4mA. An input common mode voltage range extending to 0.3V below the V− and to within 0.9V of V+, makes the LMH6640 a true single supply op-amp. The output voltage range extends to within 100 mV of either supply rail providing the user with a dynamic range that is especially desirable in low voltage applications.

The LMH6640 offers a slew rate of 170 V/µs resulting in a full power bandwidth of approximately 28 MHz with 5V single supply (2 VPP, −1 dB). Careful attention has been paid to ensure device stability under all operating voltages and modes. The result is a very well behaved frequency response characteristic for any gain setting including +1, and excellent specifications for driving video cables including total harmonic distortion of −64 dBc @ 5 MHz, differential gain of 0.12% and differential phase of 0.12°.

The LMH6640 is a voltage feedback operational amplifier with a rail-to-rail output drive capability of 100 mA. Employing TI’s patented VIP10 process, the LMH6640 delivers a bandwidth of 190 MHz at a current consumption of only 4mA. An input common mode voltage range extending to 0.3V below the V− and to within 0.9V of V+, makes the LMH6640 a true single supply op-amp. The output voltage range extends to within 100 mV of either supply rail providing the user with a dynamic range that is especially desirable in low voltage applications.

The LMH6640 offers a slew rate of 170 V/µs resulting in a full power bandwidth of approximately 28 MHz with 5V single supply (2 VPP, −1 dB). Careful attention has been paid to ensure device stability under all operating voltages and modes. The result is a very well behaved frequency response characteristic for any gain setting including +1, and excellent specifications for driving video cables including total harmonic distortion of −64 dBc @ 5 MHz, differential gain of 0.12% and differential phase of 0.12°.
filter Buscar otro/a Amplificadores operacionales de alta velocidad (GBW ≥ 50 MHz)
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet LMH6640 TFT-LCD Single, 16V Rail-to-Rail High Output Operational Amplifier datasheet (Rev. B) 18 mar 2013

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LMH730216 — Placa de evaluación para amplificador operacional simple de alta velocidad en encapsulado SOT-23 de

Texas Instruments offers this unpopulated Evaluation Board to aid in the evaluation and testing of high-speed Op Amps that are offered in the 5-/6-pin SOT-23 package. Resistors, capacitors, or any other surface-mount components can be easily mounted on this board in the desired circuit (...)

Guía del usuario: PDF
No disponible en TI.com
Modelo de simulación

LMH6640 TINA-TI Reference Design (Rev. A)

SNOM469A.TSC (312 KB) - TINA-TI Reference Design
Descargar
Herramienta de cálculo

ANALOG-ENGINEER-CALC — Calculadora para ingenieros analógicos

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
View Options
Herramienta de cálculo

VOLT-DIVIDER-CALC — Voltage divider calculation tool

<
Diseñar ahora
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Herramienta de simulación

TINA-TI — Programa de simulación analógica basado en SPICE

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Guía del usuario: PDF
View Options
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOT-23 (DBV) 5 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos