Inicio Gestión de la energía Controladores de compuertas Drivers del lado de tierra
Inicio
Gestión de la energía
Controladores de compuertas
Drivers del lado de tierra

UC1715-SP

ACTIVO

Controlador de compuerta de entrada de canal único QMLV con protección contra la radiación con salid

Haga su pedido ahora
Hoja de datos

UC1715-SP

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 2 Power switch MOSFET Peak output current (A) 2 Input supply voltage (min) (V) 7 Input supply voltage (max) (V) 20 Features Aux Output, Dead Time Control Operating temperature range (°C) -55 to 125 Fall time (ns) 25 Input threshold TTL Channel input logic Inverting Input negative voltage (V) 0 Rating Space Driver configuration Aux Output
Number of channels 2 Power switch MOSFET Peak output current (A) 2 Input supply voltage (min) (V) 7 Input supply voltage (max) (V) 20 Features Aux Output, Dead Time Control Operating temperature range (°C) -55 to 125 Fall time (ns) 25 Input threshold TTL Channel input logic Inverting Input negative voltage (V) 0 Rating Space Driver configuration Aux Output
CFP (W) 16 69.319 mm² 10.3 x 6.73
  • Single Input (PWM and TTL Compatible)
  • High Current Power FET Driver,
    1-A Source/2-A Sink
  • Auxiliary Output FET Driver,
    0.5-A Source/1-A Sink
  • Time Delays Between Power and Auxiliary Outputs
    Independently Programmable from
    50 ns to 700 ns
  • Time Delay or True Zero-Voltage Operation
    Independently Configurable for Each Output
  • Switching Frequency to 1 MHz
  • Typical 50-ns Propagation Delays
  • ENBL Pin Activates 220-µA Sleep Mode
  • Power Output is Active Low in Sleep Mode
  • Synchronous Rectifier Driver
  • Single Input (PWM and TTL Compatible)
  • High Current Power FET Driver,
    1-A Source/2-A Sink
  • Auxiliary Output FET Driver,
    0.5-A Source/1-A Sink
  • Time Delays Between Power and Auxiliary Outputs
    Independently Programmable from
    50 ns to 700 ns
  • Time Delay or True Zero-Voltage Operation
    Independently Configurable for Each Output
  • Switching Frequency to 1 MHz
  • Typical 50-ns Propagation Delays
  • ENBL Pin Activates 220-µA Sleep Mode
  • Power Output is Active Low in Sleep Mode
  • Synchronous Rectifier Driver

The UC1715 is a high speed driver designed to provide drive waveforms for complementary switches. Complementary switch configurations are commonly used in synchronous rectification circuits and active clamp/reset circuits, which can provide zero voltage switching. In order to facilitate the soft switching transitions, independently programmable delays between the two output waveforms are provided on this driver. The delay pins also have true zero voltage sensing capability which allows immediate activation of the corresponding switch when zero voltage is applied. This device requires a PWM-type input to operate and can be interfaced with commonly available PWM controllers.

The UC1715 is a high speed driver designed to provide drive waveforms for complementary switches. Complementary switch configurations are commonly used in synchronous rectification circuits and active clamp/reset circuits, which can provide zero voltage switching. In order to facilitate the soft switching transitions, independently programmable delays between the two output waveforms are provided on this driver. The delay pins also have true zero voltage sensing capability which allows immediate activation of the corresponding switch when zero voltage is applied. This device requires a PWM-type input to operate and can be interfaced with commonly available PWM controllers.
filter Buscar otro/a Drivers del lado de tierra
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
NUEVO TPS7H6003-SP ACTIVO Controlador de puerta de red antagónica generativa (GaN) de medio puente QMLV de 200 V y resisten Dual low-side implementation for GaN

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 14
Tipo Título Fecha
* Data sheet Complementary Switch FET Drivers . datasheet 03 may 2013
* Radiation & reliability report UC1715-SP Radiation Report 25 feb 2020
* SMD UC1715-SP SMD 5962-00521 08 jul 2016
Application brief DLA Approved Optimizations for QML Products (Rev. A) PDF | HTML 05 jun 2024
Selection guide TI Space Products (Rev. J) 12 feb 2024
More literature TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. A) 31 ago 2023
Application note QML flow, its importance, and obtaining lot information (Rev. C) 30 ago 2023
Application note Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. A) PDF | HTML 17 nov 2022
Application note Single-Event Effects Confidence Interval Calculations (Rev. A) PDF | HTML 19 oct 2022
Application note DLA Standard Microcircuit Drawings (SMD) and JAN Part Numbers Primer 21 ago 2020
Application note Hermetic Package Reflow Profiles, Termination Finishes, and Lead Trim and Form PDF | HTML 18 may 2020
Application brief External Gate Resistor Selection Guide (Rev. A) 28 feb 2020
Application brief Understanding Peak IOH and IOL Currents (Rev. A) 28 feb 2020
E-book Radiation Handbook for Electronics (Rev. A) 21 may 2019

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
CFP (W) 16 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos