The ADC32RF42 device is a 14-bit, 1.5-GSPS, dual-channel, analog-to-digital converter (ADC) that supports RF sampling with input frequencies up to 4 GHz and beyond. Designed for high signal-to-noise ratio (SNR), the ADC32RF42 delivers a noise spectral density of –151.8 dBFS/Hz as well as dynamic range and channel isolation over a large input frequency range. The buffered analog input with on-chip termination provides uniform input impedance across a wide frequency range and minimizes sample-and-hold glitch energy.
Each ADC channel can be connected to a dual-band, digital down-converter (DDC) with up to three independent, 16-bit numerically-controlled oscillators (NCOs) per DDC for phase-coherent frequency hopping. Additionally, the ADC is equipped with front-end peak and RMS power detectors and alarm functions to support external automatic gain control (AGC) algorithms.
The ADC32RF42 supports the JESD204B serial interface with subclass 1-based deterministic latency using data rates up to 12.5 Gbps with up to four lanes per ADC. The device is offered in a 72-pin VQFN package (10 mm × 10 mm) and supports the industrial temperature range (–40°C to +85°C).
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | ADC32RF42 Dual-Channel, 14-Bit, 1.5-GSPS, Analog-to-Digital Converter datasheet | PDF | HTML | 2017/05/16 |
| EVM User's guide | ADC32RFxxEVM User's Guide (Rev. E) | 2020/01/31 | ||
| Application note | Configuration Files for ADC32RF45, ADC32RF83, and ADC32RF80 (Rev. B) | 2017/09/05 |
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ADC32RF42 평가 모듈(EVM)은 JESD204B 인터페이스를 사용하는 듀얼 1.5 GSPS 14비트 ADC(아날로그-디지털 컨버터)의 성능을 입증합니다. 이 EVM에는 ADC32RF42 장치가 포함되어 있으며, 필요한 전압을 공급하기 위해 LMK04828과 TI 전압 레귤레이터가 JESD204B 클로킹을 제공합니다.
ADC의 각 채널에 대한 입력은 기본 설정상 변압기 입력 회로에 연결되어 있으며, 이는 50Ω 단일 종단 신호 소스에 연결할 수 있습니다. 클록 레퍼런스 입력은 변압기 입력을 통해 제공되며, (...)
The JESD204 rapid design IP has been designed to enable FPGA engineers to achieve an accelerated path to a working JESD204 system. The IP has been architected in a way that downstream digital processing and other application logic are isolated from most of the performance- and timing-critical (...)
This Excel calculator provides system designers a way to simplify the design and debugging of direct RF-sampling receivers. It offers three functions: frequency planning, analog filtering, and decimation filter spur location.
In the concept phase, a frequency-planning tool enables fine tuning of (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFNP (RMP) | 72 | Ultra Librarian |
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.