開發模組 (EVM) 的 GUI
SMART-DAC-EVM-GUI — Smart DAC and smart AFE evaluation module software
This GUI interfaces with the on board controller of the smart DAC and smart AFE EVM ecosystem.
AFE539F1-Q1
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, T A
- Constant power-dissipation control state-machine
- 10-bit analog-to-digital converter (ADC) input
- 7-bit duty-cycle pulse-width modulation (PWM) output
- Standalone operation from nonvolatile memory (NVM)
- Automatically detects I 2C or SPI
- 1.62-V V IH with V DD = 5.5 V
- VREF/MODE pin selects between programming and standalone modes
- User-programmable NVM
- Internal, external, or VDD reference
- Wide operating range
- Power supply: 1.8 V to 5.5 V
- Tiny package: 16-pin WQFN (3 mm × 3 mm)
The AFE539F1-Q1 is a 10-bit smart analog front end (AFE) targeted for constant power-dissipation control. The AFE539F1-Q1 can be used everywhere where constant power dissipation is desired on a resistive load independently on applied voltage. The AFE539F1-Q1 has an ADC input and a PWM output. This device has an integrated state machine that is preprogrammed as a constant power-dissipation controller. The AFE539F1-Q1 is an excellent choice for automotive DC-link capacitor discharge circuit and general constant-power-heating applications. The AFE539F1-Q1 works independently from parameters programmed into the NVM, which enable this smart AFE for processor-less applications and design reuse. This device also automatically detects I 2C or SPI, and has an internal reference.
您可能會感興趣的類似產品
引腳對引腳且具備與所比較裝置相同的功能
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | AFE539F1-Q1 Automotive, 10-Bit Smart Analog Front End for Constant Power Discharge With PWM Output datasheet | PDF | HTML | 2023年 7月 3日 |
| Application brief | How to Reduce the Power Resistor for DC-Link Discharge in Traction-Inverter Applications | PDF | HTML | 2024年 8月 14日 | |
| Product overview | Smart DAC Product Selection Guide | PDF | HTML | 2024年 7月 1日 | |
| Functional safety information | AFE539F1-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA | PDF | HTML | 2024年 3月 25日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
計算工具
ANALOG-ENGINEER-CALC — 類比工程師計算機
The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WQFN (RTE) | 16 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。