BQ2057C

現行

具有 AutoCompTM 4.2V 的低壓差線性 1 芯鋰離子電池充電控制器

立即訂購

產品規格表

document-pdfAcrobat Advanced Linear Charge Mgmt IC for Single/Two-Cell Lithium-Ion & Lithium-Polymer datasheet (Rev. G) (英文)

現在提供此產品的更新版本

open-in-new

比較替代產品

功能相同，但引腳輸出與所比較的裝置不同

BQ25170

現行

適用於單節鋰離子和磷酸鐵鋰電池的 800mA 線性電池充電器 This product is an 800-mA, single cell Li-Ion and LiFePO4 battery linear charger with programmable charge voltage

BQ2057C

現行

產品規格表

立即訂購

產品詳細資料

Number of series cells

1

Charge current (max) (A)

2

Vin (max) (V)

15

Cell chemistry

Li-Ion/Li-Polymer

Battery charge voltage (min) (V)

4.2

Battery charge voltage (max) (V)

4.2

Absolute max Vin (max) (V)

18

Control topology

Linear

Control interface

Standalone (RC-Settable)

Features

BAT temp thermistor monitoring (hot/cold profile)

Vin (min) (V)

4.5

Rating

Catalog

Operating temperature range (°C)

-20 to 70

Number of series cells

1

Charge current (max) (A)

2

Vin (max) (V)

15

Cell chemistry

Li-Ion/Li-Polymer

Battery charge voltage (min) (V)

4.2

Battery charge voltage (max) (V)

4.2

Absolute max Vin (max) (V)

18

Control topology

Linear

Control interface

Standalone (RC-Settable)

Features

BAT temp thermistor monitoring (hot/cold profile)

Vin (min) (V)

4.5

Rating

Catalog

Operating temperature range (°C)

-20 to 70

SOIC (D)

8

29.4 mm² 4.9 x 6

TSSOP (PW)

8

19.2 mm² 3 x 6.4

VSSOP (DGK)

8

14.7 mm² 3 x 4.9

Ideal for single (4.1 V or 4.2 V) and dual-cell (8.2 V or 8.4 V) Li-ion or Li-pol packs
Requires small number of external components
0.3-V dropout voltage for minimizing heat dissipation
Better than ±1% voltage regulation accuracy with preset voltages
AutoCompM dynamic compensation of battery pack’s internal impedance to reduce charge time
Optional cell-temperature monitoring before and during charge
Integrated voltage and current regulation with programmable charge-current and high- or low-side current sensing
Integrated cell conditioning for reviving deeply discharged cells and minimizing heat dissipation during initial stage of charge
Charge status output for single or dual led or host processor interface
Automatic battery-recharge feature
Charge termination by minimum current
Automatic low-power sleep mode when V_CC is removed
EVMs available for quick evaluation
Packaging: 8-pin SOIC, 8-pin TSSOP, 8-pin MSOP

Ideal for single (4.1 V or 4.2 V) and dual-cell (8.2 V or 8.4 V) Li-ion or Li-pol packs
Requires small number of external components
0.3-V dropout voltage for minimizing heat dissipation
Better than ±1% voltage regulation accuracy with preset voltages
AutoCompM dynamic compensation of battery pack’s internal impedance to reduce charge time
Optional cell-temperature monitoring before and during charge
Integrated voltage and current regulation with programmable charge-current and high- or low-side current sensing
Integrated cell conditioning for reviving deeply discharged cells and minimizing heat dissipation during initial stage of charge
Charge status output for single or dual led or host processor interface
Automatic battery-recharge feature
Charge termination by minimum current
Automatic low-power sleep mode when V_CC is removed
EVMs available for quick evaluation
Packaging: 8-pin SOIC, 8-pin TSSOP, 8-pin MSOP

The BQ2057 series advanced lithium-ion (Li-ion) and lithium-polymer (Li-pol) linear charge-management ICs are designed for cost-sensitive and compact portable electronics. They combine high-accuracy current and voltage regulation, battery conditioning, temperature monitoring, charge termination, charge-status indication, and AutoComp™ charge-rate compensation in a single 8-pin IC. MSOP, TSSOP, and SOIC package options are offered to fit a wide range of end applications.

The BQ2057 continuously measures battery temperature using an external thermistor. For safety, the BQ2057 inhibits charge until the battery temperature is within user-defined thresholds. The BQ2057 then charges the battery in three phases: conditioning, constant current, and constant voltage. If the battery voltage is below the low-voltage threshold, V_(min), the BQ2057 precharges using a low current to condition the battery. The conditioning charge rate is approximately 10% of the regulation current. The conditioning current also minimizes heat dissipation in the external pass-element during the initial stage of the charge. After conditioning, the BQ2057 applies a constant current to the battery. An external sense-resistor sets the current. The sense-resistor can be on either the high or low side of the battery without additional components. The constant-current phase continues until the battery reaches the charge-regulation voltage.

The BQ2057 then begins the constant-voltage phase. The accuracy of the voltage regulation is better than ±1% over the operating-temperature and supply-voltage ranges. For single and dual cells, the BQ2057 is offered in four fixed-voltage versions: 4.1 V, 4.2 V, 8.2 V, and 8.4 V. Charge stops when the current tapers to the charge termination threshold, I_(TERM). The BQ2057 automatically restarts the charge if the battery voltage falls below the V_(RCH) threshold.

The designer also may use the AutoComp feature to reduce charging time. This proprietary technique allows safe and dynamic compensation for the internal impedance of the battery pack during charge.

The BQ2057 series advanced lithium-ion (Li-ion) and lithium-polymer (Li-pol) linear charge-management ICs are designed for cost-sensitive and compact portable electronics. They combine high-accuracy current and voltage regulation, battery conditioning, temperature monitoring, charge termination, charge-status indication, and AutoComp™ charge-rate compensation in a single 8-pin IC. MSOP, TSSOP, and SOIC package options are offered to fit a wide range of end applications.

The BQ2057 continuously measures battery temperature using an external thermistor. For safety, the BQ2057 inhibits charge until the battery temperature is within user-defined thresholds. The BQ2057 then charges the battery in three phases: conditioning, constant current, and constant voltage. If the battery voltage is below the low-voltage threshold, V_(min), the BQ2057 precharges using a low current to condition the battery. The conditioning charge rate is approximately 10% of the regulation current. The conditioning current also minimizes heat dissipation in the external pass-element during the initial stage of the charge. After conditioning, the BQ2057 applies a constant current to the battery. An external sense-resistor sets the current. The sense-resistor can be on either the high or low side of the battery without additional components. The constant-current phase continues until the battery reaches the charge-regulation voltage.

The BQ2057 then begins the constant-voltage phase. The accuracy of the voltage regulation is better than ±1% over the operating-temperature and supply-voltage ranges. For single and dual cells, the BQ2057 is offered in four fixed-voltage versions: 4.1 V, 4.2 V, 8.2 V, and 8.4 V. Charge stops when the current tapers to the charge termination threshold, I_(TERM). The BQ2057 automatically restarts the charge if the battery voltage falls below the V_(RCH) threshold.

The designer also may use the AutoComp feature to reduce charging time. This proprietary technique allows safe and dynamic compensation for the internal impedance of the battery pack during charge.

filter

尋找其它電池充電器 IC

下載