首頁 電池管理 IC 電池充電器 IC
首頁
電池管理 IC
電池充電器 IC
最新

BQ25190

現行

具有整合式降壓升壓、DVS 降壓、LDO、ADC 和電源路徑的 I²C 單芯 1A 線性電池充電器

立即訂購
產品規格表

BQ25190

現行
產品規格表 立即訂購

產品詳細資料

Number of series cells 1 Charge current (max) (A) 1 Vin (max) (V) 25 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.65 Absolute max Vin (max) (V) 25 Control topology Linear Control interface I2C Features BAT temp thermistor monitoring (JEITA profile), Boost/Buck-Boost, Buck, IC thermal regulation, IINDPM (Input current limit), Input OVP, Power Path, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3 Rating Catalog Operating temperature range (°C) -40 to 85
Number of series cells 1 Charge current (max) (A) 1 Vin (max) (V) 25 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.65 Absolute max Vin (max) (V) 25 Control topology Linear Control interface I2C Features BAT temp thermistor monitoring (JEITA profile), Boost/Buck-Boost, Buck, IC thermal regulation, IINDPM (Input current limit), Input OVP, Power Path, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3 Rating Catalog Operating temperature range (°C) -40 to 85
DSBGA (YBG) 30 5.46 mm² 2.6 x 2.1
  • Integrated 1A power path linear battery charger
    • 3.0V to 18.0V input voltage operating range
    • Input voltage up to 25V tolerant
    • Configurable battery regulation voltage with ±0.5% accuracy from 3.5V to 4.65V in 10mV steps
    • 5mA to 1A configurable fast charge current
    • 55mΩ BATFET on-resistance
    • Up to 2.5A discharge current to support high system loads
    • Fully programmable JEITA profile for safe charging over temperature
  • Power path management for powering the system and charging the battery
    • Regulated system voltage ranging from 4.4V to 4.9V in addition to battery voltage tracking and input pass-through options
    • Configurable input current limit
    • Dynamic power path management optimizes charging from weak adapters
    • Selectable adapter or battery for system power
    • Advanced system reset mechanisms
  • Ultra-low quiescent current modes
    • 2µA battery quiescent current in battery mode
    • 15nA battery quiescent current in ship mode
  • Integrated Buck converter with I2C and GPIO programmable DVS output
    • 0.36µA quiescent current from system
    • 0.4V to 1.575V output voltage in 12.5mV steps or 0.4V to 3.6V output voltage in 25mV/50mV steps
    • Up to 600mA output current
  • Integrated Buck-boost converter with I2C programmable DVS output
    • 0.1µA quiescent current from system
    • 1.7V to 5.2V output voltage in 50mV steps
    • Up to 600mA output current for VSYS ≥ 3.0V, VBBOUT = 3.3V
  • Integrated I2C programmable LDOs (LDO1 and LDO2)
    • 25nA quiescent current
    • 0.8V to 3.6V output voltage in 50mV steps
    • Up to 200mA output current
    • LDO1 capabal of remaining on in Ship mode
    • Configurable LDO or Bypass mode
    • Dedicated input pins
  • Integrated fault protection for safety
    • Input current limit and overvoltage protection
    • Battery, integrated rail overcurrent protection
    • Battery depletion protection
    • Thermal regulation and thermal shutdown
  • Integrated 12-bit ADC to monitor input current, BATFET current, input voltage, battery voltage, battery temperature or external voltage signals
  • Integrated 1A power path linear battery charger
    • 3.0V to 18.0V input voltage operating range
    • Input voltage up to 25V tolerant
    • Configurable battery regulation voltage with ±0.5% accuracy from 3.5V to 4.65V in 10mV steps
    • 5mA to 1A configurable fast charge current
    • 55mΩ BATFET on-resistance
    • Up to 2.5A discharge current to support high system loads
    • Fully programmable JEITA profile for safe charging over temperature
  • Power path management for powering the system and charging the battery
    • Regulated system voltage ranging from 4.4V to 4.9V in addition to battery voltage tracking and input pass-through options
    • Configurable input current limit
    • Dynamic power path management optimizes charging from weak adapters
    • Selectable adapter or battery for system power
    • Advanced system reset mechanisms
  • Ultra-low quiescent current modes
    • 2µA battery quiescent current in battery mode
    • 15nA battery quiescent current in ship mode
  • Integrated Buck converter with I2C and GPIO programmable DVS output
    • 0.36µA quiescent current from system
    • 0.4V to 1.575V output voltage in 12.5mV steps or 0.4V to 3.6V output voltage in 25mV/50mV steps
    • Up to 600mA output current
  • Integrated Buck-boost converter with I2C programmable DVS output
    • 0.1µA quiescent current from system
    • 1.7V to 5.2V output voltage in 50mV steps
    • Up to 600mA output current for VSYS ≥ 3.0V, VBBOUT = 3.3V
  • Integrated I2C programmable LDOs (LDO1 and LDO2)
    • 25nA quiescent current
    • 0.8V to 3.6V output voltage in 50mV steps
    • Up to 200mA output current
    • LDO1 capabal of remaining on in Ship mode
    • Configurable LDO or Bypass mode
    • Dedicated input pins
  • Integrated fault protection for safety
    • Input current limit and overvoltage protection
    • Battery, integrated rail overcurrent protection
    • Battery depletion protection
    • Thermal regulation and thermal shutdown
  • Integrated 12-bit ADC to monitor input current, BATFET current, input voltage, battery voltage, battery temperature or external voltage signals

The BQ25190 is a highly integrated battery management unit that integrates the most commonly used functions for wearable devices: a linear charger with power path, one step-down switching converter (Buck), one buck-boost switching converter (Buck-boost), two LDOs (LDO1 and LDO2), manual reset with timer (MR) , multi-channel analog-to-digital converter (ADC), as well as four multifunctional general-purpose input/outputs (GPIO).

The integrated charger supports charge current from 5mA to 1A that enables quick and accurate charging while providing a regulated voltage to the system. The regulated system voltage (VSYS) can be configured through I2C based on the recommended operating conditions of the downstream system loads. Other operation parameters such as the input current limit, charge current, Buck converters’ output voltages, Buck-boost converters’ output voltage, and LDOs’ output voltages are also programmable through the I2C interface.

The BQ25190 features low quiescent current during operation and shutdown, which enables longer battery life.

The BQ25190 is a highly integrated battery management unit that integrates the most commonly used functions for wearable devices: a linear charger with power path, one step-down switching converter (Buck), one buck-boost switching converter (Buck-boost), two LDOs (LDO1 and LDO2), manual reset with timer (MR) , multi-channel analog-to-digital converter (ADC), as well as four multifunctional general-purpose input/outputs (GPIO).

The integrated charger supports charge current from 5mA to 1A that enables quick and accurate charging while providing a regulated voltage to the system. The regulated system voltage (VSYS) can be configured through I2C based on the recommended operating conditions of the downstream system loads. Other operation parameters such as the input current limit, charge current, Buck converters’ output voltages, Buck-boost converters’ output voltage, and LDOs’ output voltages are also programmable through the I2C interface.

The BQ25190 features low quiescent current during operation and shutdown, which enables longer battery life.

filter 尋找其它 電池充電器 IC
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet BQ25190 I2 C Controlled 1-Cell, 1A, Linear Battery Charger with Integrated Buck-Boost, DVS Buck, LDOs, ADC, and Power Path datasheet PDF | HTML 2024年 10月 3日
User guide BQ25190EVM User's Guide PDF | HTML 2023年 8月 18日
Certificate BQ25190EVM EU Declaration of Conformity (DoC) 2023年 8月 7日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

BQ25190EVM — BQ25190 評估模組

BQ25190EVM 是適用於 BQ25190 電池充電管理 IC 的評估模組。BQ25190 整合了穿戴式裝置最常見的功能：線性充電器、穩壓輸出、透過定時器的手動重設和運輸模式功能。
使用指南: PDF | HTML
TI.com 無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YBG) 30 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片