BQ41Z50
- Fully integrated 2-series, 3-series, and 4-series cell Li-ion, LiPO, or LiFePO4 battery pack manager and protection
- Ultra-low power 32-bit RISC processor
- TI Dynamic Z-Track™ algorithm
- Up to 40V tolerant power supply pins
- High side N-CH protection FET drive with configurable drive strength
- Precision analog front-end with two independent 16-bit ADCs:
- Support for simultaneous current and voltage sampling
- Support for up to four external thermistor measurements and an internal temperature sensor
- Primary and secondary levels of protection
- Overvoltage and undervoltage
- Overcurrent in charge and discharge
- Short circuit in discharge
- Overtemperature
- Charge timeout
- CHG and DSG FET drivers
- Sophisticated charge algorithms
- JEITA
- Adaptive charging based on cycle time, run time, and SOH
- Cell balancing
- Integrated cell balancing while charging or at rest
- Supports TURBO mode
- Diagnostic lifetime data monitor and black box recorder
- Optional up to three LED display support
- Supports SHA-1, SHA-2, and Elliptic Curve Cryptography (ECC) authentication
- Up to 1MHz SMBus v3.2 host communication support
- Compact package: 32-lead WQFN (RSN)
The BQ41Z50 device, incorporating Dynamic Z-Track™ technology, is a fully integrated, single-chip, pack-based solution that provides a rich array of features for gas gauging, protection, and authentication for 2-series, 3-series, and 4-series cell Li-ion, LiPO, and LiFePO4 battery packs.
Using its integrated high-performance analog peripherals and ultra-low power 32-bit RISC processor, the BQ41Z50 device measures and maintains an accurate record of available cell capacity, voltage, current, temperature, and other critical battery parameters and reports them to the system host controller over an SMBus v3.2 compatible interface.
技術文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 5 類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | BQ41Z50 2-Series, 3-Series, and 4-Series Cell Li-Ion Battery Pack Manager with Dynamic Z-Track datasheet | PDF | HTML | 2024年 6月 19日 |
Application note | BQ41xxx Production Calibration Guide | PDF | HTML | 2024年 7月 1日 | |
User guide | BQ41Z50 Technical Reference Manual | PDF | HTML | 2024年 6月 21日 | |
EVM User's guide | BQ41Z50 Li-Ion Battery Pack Manager Evaluation Module User's Guide | PDF | HTML | 2024年 6月 20日 | |
Certificate | BQ41z50EVM EU Declaration of Conformity (DoC) | 2024年 6月 10日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
BQ41Z50EVM — BQ41Z50 評估模組
BQ41Z50EVM 是用於評估 BQ41Z50 電量計功能的完整系統。此電量計適用於以多芯電池系統供電的應用。電路模組包括一個 BQ41Z50 積體電路、一個 BQ296103,以及監控與預測 2 芯、3 芯或 4 芯串聯鋰離子或鋰聚合物電池組之容量所需的所有其他板載零組件。
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
WQFN (RSN) | 32 | Ultra Librarian |
訂購與品質
內含資訊:
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊:
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。