ISO122
- 100% Tested for High-Voltage Breakdown
- Rated 1500 Vrms
- High IMR: 140 dB at 60 Hz
- Bipolar Operation: VO = ±10 V
- 16-Pin Plastic DIP and 28-Lead SOIC
- Ease of Use: Fixed Unity Gain Configuration
- 0.020% Maximum Nonlinearity
- ±4.5-V to ±18-V Supply Range
The ISO122 is a precision isolation amplifier incorporating a novel duty cycle modulation-demodulation technique. The signal is transmitted digitally across a 2-pF differential capacitive barrier. With digital modulation the barrier characteristics do not affect signal integrity, thus resulting in excellent reliability and good high-frequency transient immunity across the barrier. Both barrier capacitors are imbedded in the plastic body of the package.
The ISO122 is easy to use. No external components are required for operation. The key specifications are 0.020% maximum nonlinearity, 50-kHz signal bandwidth, and 200-V/°C VOS drift. A power supply range of 4.5 V to 18 V and quiescent currents of 5 mA on VS1 and ±5.5 mA on VS2 make the ISO122 ideal for a wide range of applications.
The ISO122 is available in 16-pin plastic DIP and
28-lead plastic surface-mount packages.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | ISO122 Precision Lowest-Cost Isolation Amplifier datasheet (Rev. A) | PDF | HTML | 2015年 1月 23日 |
| White paper | Comparing Isolated Amplifiers and Isolated Modulators (Rev. B) | PDF | HTML | 2024年 6月 4日 | |
| Application brief | Shunt Resistor Selection for Isolated Data Converters | PDF | HTML | 2023年 5月 4日 | |
| Application note | Boost ISO120 Bandwidth to More Than 100kHz | 2000年 9月 27日 | ||
| Application note | IC Building Blocks Form Complete Isolated 4-20mA Current-Loop | 2000年 9月 27日 | ||
| Application note | Noise Sources In Applications Using Capacitive Coupled Isolated Amplifier | 2000年 9月 27日 | ||
| Application note | Simple Output Filter Eliminates ISO Amp Output Ripple And Keeps Full Bandwidth | 2000年 9月 27日 | ||
| Application note | Single Supply 4-20mA Current Loop Receiver | 2000年 9月 27日 | ||
| Application note | Single-Supply Operation of Isolation Amplifiers | 2000年 9月 27日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| PDIP (NVF) | 8 | Ultra Librarian |
| SOIC (DVA) | 8 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。