ISO7842
- Signaling Rate: Up to 100Mbps
- Wide Supply Range: 2.25V to 5.5V
- 2.25V to 5.5V Level Translation
- Wide Temperature Range: –55°C to +125°C
- Low-Power Consumption, Typical 1.7mA per Channel at 1Mbps
- Low Propagation Delay: 11ns Typical (5V Supplies)
- Industry leading CMTI (Min): ±100kV/µs
- Robust Electromagnetic Compatibility (EMC)
- System-Level ESD, EFT, and Surge Immunity
- Low Emissions
- Isolation Barrier Life: >40 Years
- Wide Body SOIC-16 Package and Extra-Wide Body SOIC-16 Package Options
- Safety and Regulatory Approvals:
- 8000VPK Reinforced Isolation per DIN EN IEC 60747-17 (VDE 0884-17)
- 5.7kVRMS Isolation for 1 Minute per UL 1577
- CSA Component Acceptance Notice 5A, IEC 60950-1 and IEC 60601-1 End Equipment Standards
- CQC Certification per GB4943.1
- TUV Certification per EN 61010-1 and EN 62368-1
The ISO7842x device is a high-performance, quad-channel digital isolator with a 8000VPK isolation voltage. This device has reinforced isolation certifications according to VDE, CSA, CQC, and TUV. The isolator provides high electromagnetic immunity and low emissions at low-power consumption while isolating CMOS or LVCMOS digital I/Os. Each isolation channel has a logic input and output buffer separated by a silicon-dioxide (SiO2) insulation barrier.
This device comes with enable pins that can be used to put the respective outputs in high impedance for multi-master driving applications and to reduce power consumption. The ISO7842 device has two forward and two reverse-direction channels. If the input power or signal is lost, the default output is high for the ISO7842 device and low for the ISO7842F device. See the Device Functional Modes section for further details.
Used in conjunction with isolated power supplies, this device helps prevent noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry. Through innovative chip design and layout techniques, electromagnetic compatibility of the ISO7842 device has been significantly enhanced to ease system-level ESD, EFT, surge, and emissions compliance.
The ISO7842 device is available in 16-pin SOIC wide-body (DW) and extra-wide body (DWW) packages.
技術文件
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
DIGI-ISO-EVM — 通用數位隔離器評估模組
DIGI-ISO-EVM 是一款評估模組 (EVM)，可評估任何 TI 單通道、雙通道、三通道、四通道或六通道數位隔離器裝置，並提供五種不同封裝 - 8 接腳窄體 SOIC (D)、8 接腳寬體 SOIC (DWV)、16 接腳寬體 SOIC (DWW)、16 接腳超寬體 SOIC (DWW) 和 16 接腳 (DBQ) 封裝。EVM 具備足夠 Berg 接腳選項，可用於評估具最少外部零組件的裝置。
ISO7842-EVM — 高抗擾度、5.7kVRMS 強化四通道 2/2 數位隔離器評估模組
The ISO7842 provides galvanic isolation up to 5700 VRMS for 1 minute per UL and 8000 VPK per VDE. This device has four isolated channels comprised of a logic input and output buffer separated by a silicon dioxide (SiO2) insulation barrier. Used in conjunction with isolated power supplies, this (...)
TIDA-00420 — ADC 架構、數位隔離、廣泛輸入、16 通道、AC/DC 二進位輸入參考設計
TIDA-00267 — 極性修正隔離式 CAN 參考設計
TIDA-01037 — 可實現最大 SNR 和取樣率的 20 位元 1 MSPS 隔離器最佳化資料採集參考設計
TIDA-01590 — 適用於太陽能匯流箱的 1200V 隔離式 I2C 高壓側電流感測參考設計
TIDA-01035 — 最佳化抖動以實現最大 SNR 和取樣率的 20 位元隔離式資料採集參考設計
- Significantly improves high frequency AC signal chain performance (SNR and THD) by (...)
TIDA-00732 — 可實現最大 SNR 和採樣率的 18 位元 2 MSPS 隔離式資料採集參考設計
- Maximizing sampling rate by minimizing propagation delay introduced by digital (...)
TIDA-00448 — 具有強化數位隔離器的彈性高電流 IGBT 閘極驅動器參考設計
TIDA-00330 — 強化隔離式 M-LVDS 收發器參考設計
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOIC (DW) | 16 | Ultra Librarian |
| SOIC (DWW) | 16 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。