SN74LVC2G17-Q1
- Qualified for Automotive Applications
- Supports 5-V VCC Operation
- Inputs Accept Voltages to 5.5 V
- Max tpd of 5.4 ns at 3.3 V
- Low Power Consumption, 10-µA Max ICC
- ±24-mA Output Drive at 3.3 V
- Typical VOLP (Output Ground Bounce)
<0.8 V at VCC = 3.3 V, TA = 25°C - Typical VOHV (Output VOH Undershoot)
>2 V at VCC = 3.3 V, TA = 25°C - Ioff Supports Partial-Power-Down Mode Operation
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 1000-V Charged-Device Model (C101)
This dual Schmitt-trigger buffer is designed for 1.65-V to 5.5-V VCC operation.
The SN74LVC2G17 contains two buffers and performs the Boolean function Y = A. The device functions as two independent buffers, but because of Schmitt action, it may have different input threshold levels for positive-going (VT+) and negative-going (VT-) signals.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
技術文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 29 設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
5-8-LOGIC-EVM — 適用於 5 針腳至 8 針腳 DCK、DCT、DCU、DRL 和 DBV 封裝的通用邏輯評估模組
靈活的 EVM 旨在支援任何針腳數為 5 至 8 支且採用 DCK、DCT、DCU、DRL 或 DBV 封裝的裝置。
使用指南: PDF
參考設計
TIDA-010253 — 適用於儲能系統的電池控制單元參考設計
此參考設計為高電壓鋰離子 (Li-ion)、磷酸鐵鋰 (LiFePO4) 電池架的中央控制器。此設計提供適用於高電壓繼電器的驅動電路、通訊介面 (包括 RS-485、控制器區域網路 (CAN)、菊鍊與乙太網路)、濕度感測器的可擴充介面、高電壓類比轉數位轉換器 (ADC),以及電流感測器。
此設計使用高性能微控制器進行開發和測試應用。這些功能讓此參考設計適用於高容量電池架應用的中央控制器。
Design guide: PDF
參考設計
TIDA-01168 — 適用於 12-V/48-V 車用系統的雙向 DC/DC 轉換器參考設計
The TIDA-01168 reference design is a four-phase, bidirectional DC-DC converter development platform for 12-V/48-V automotive systems. The system uses two LM5170-Q1 current controllers and a TMS320F28027F microcontroller (MCU) for the power stage control. LM5170-Q1 subsystems use average current (...)
參考設計
TIDA-060009 — 汽車動力行李箱升降馬達驅動器參考設計
This design describes how to drive an automotive trunk lift or rear gate lift.
In this design, a brushed BD lift motor and electromagnetic clutch drive mechanisms for a typical gear driven lift. This design includes a warning beeper, LED indicator, and directional control that uses an automotive (...)
In this design, a brushed BD lift motor and electromagnetic clutch drive mechanisms for a typical gear driven lift. This design includes a warning beeper, LED indicator, and directional control that uses an automotive (...)
參考設計
TIDA-00580 — 通過車規認證的 16 位元旋轉相位差編碼器參考設計
在許多情況下,人們更喜歡在觸控式螢幕上使用旋鈕。 此解決方案減少與微控制器的必要連接,監控旋轉相位差編碼器的旋轉方向和距離。
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
SOT-SC70 (DCK) | 6 | Ultra Librarian |
訂購與品質
內含資訊:
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊:
- 晶圓廠位置
- 組裝地點