TXH0137D-Q1
- This information is only for the automotive device
- Wide voltage-level translation range:
- 1.5 V ↔ 30 V up and down translation or level shifting
- High drive strength (up to 100 mA IOLper channel)
- High-voltage tolerant I/O (up to 30 V)
- Low power consumption:
- 30 µA ICC maximum
- 10 nA I/O leakage
- Overshoot protection with output clamp diode
- Inputs with integrated static pull-down and series resistors allowing for slow, floating or noisy inputs
- Inputs are TTL compatible
- AEC-Q100 qualified with the following results:
- Device temperature grade 1: –40°C to +125°C ambient operating temperature range
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C4B
The TXH0137D-Q1 is a 7-bit, single supply inverting fixed direction voltage level translation device. This device has open-drain outputs that support voltages up to 30 V and currents up to 100 mA per channel. These outputs can be used in parallel for even higher current capabilities. Due to these very high currents, the outputs are more susceptible to large overshoots caused by the load reactance. To combat this, the outputs are equipped with overshoot-protection diodes that clamp.
技術文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 5 類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TXH0137D-Q1 Automotive 7-Bit Fixed Direction Voltage-Level Translator with Inverted Open-drain Outputs datasheet | PDF | HTML | 2023年 9月 20日 |
Application note | Schematic Checklist - A Guide to Designing With Fixed or Direction Control Translators | PDF | HTML | 2024年 10月 2日 | |
Application note | Schematic Checklist - A Guide to Designing with Auto-Bidirectional Translators | PDF | HTML | 2024年 7月 12日 | |
Application note | Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A) | PDF | HTML | 2024年 7月 3日 | |
Application brief | Leveraging TXH for High Voltage Level Shifting | PDF | HTML | 2023年 7月 28日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
14-24-LOGIC-EVM — 適用於 14 針腳至 24 針腳 D、DB、DGV、DW、DYY、NS 和 PW 封裝的邏輯產品通用評估模組
14-24-LOGIC-EVM 評估模組 (EVM) 設計用於支援任何 14 針腳至 24 針腳 D、DW、DB、NS、PW、DYY 或 DGV 封裝的任何邏輯裝置。
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
TSSOP (PW) | 14 | Ultra Librarian |
訂購與品質
內含資訊:
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊:
- 晶圓廠位置
- 組裝地點