PTXH0137DQPWRQ1 具有開漏輸出的車用、固定方向、7 位元 30-V 電壓位準轉換器 | PW | 14 | -40 to 125 package image

PTXH0137DQPWRQ1 現行

具有開漏輸出的車用、固定方向、7 位元 30-V 電壓位準轉換器

定價

數量 價格
+

出口分類

*僅供參考

  • 美國 ECCN:EAR99

封裝資訊

封裝 | 針腳 TSSOP (PW) | 14
操作溫度範圍 (°C) -40 to 125
包裝數量 | 運送業者 2,000 | LARGE T&R

TXH0137D-Q1 的特色

  • This information is only for the automotive device
  • Wide voltage-level translation range:
    • 1.5 V ↔ 30 V up and down translation or level shifting
  • High drive strength (up to 100 mA IOLper channel)
  • High-voltage tolerant I/O (up to 30 V)
  • Low power consumption:
    • 30 µA ICC maximum
    • 10 nA I/O leakage
  • Overshoot protection with output clamp diode
  • Inputs with integrated static pull-down and series resistors allowing for slow, floating or noisy inputs
  • Inputs are TTL compatible
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD Classification Level 2
    • Device CDM ESD Classification Level C4B

TXH0137D-Q1 的說明

The TXH0137D-Q1 is a 7-bit, single supply inverting fixed direction voltage level translation device. This device has open-drain outputs that support voltages up to 30 V and currents up to 100 mA per channel. These outputs can be used in parallel for even higher current capabilities. Due to these very high currents, the outputs are more susceptible to large overshoots caused by the load reactance. To combat this, the outputs are equipped with overshoot-protection diodes that clamp.

定價

數量 價格
+

包裝類型選項

您可依零件數量選擇不同包裝類型選項,包含完整捲盤、客製化捲盤、剪切捲帶、承載管或盤。

客製化捲盤是從一個捲盤上剪切下來的連續剪切捲帶,以維持批次和日期代碼可追溯性,依要求剪切至確切數量。依照業界標準,銅墊片會在剪切捲帶兩側連接 18 英吋前後導帶,以直接送至自動組裝機器。針對客製化捲盤訂單,TI 將酌收捲帶封裝費用。

剪切捲帶是從捲盤剪切下來的一段捲帶。TI 可能使用多條剪切捲帶或承載盒,以滿足訂單要求數量。

TI 常以盒裝或管裝、盤裝方式運送承載管裝置,視現有庫存而定。所有捲帶、管或樣本盒之封裝,皆符合公司內部靜電放電與防潮保護包裝要求。

進一步了解

可提供批次和日期代碼選擇

在購物車中加入數量,並開始結帳流程以檢視可用選項,從現有庫存中選擇批次或日期代碼。

進一步了解