Calculation tool
XTR-ERROR-CALC — Current Transmitter Error Calculator
This spreadsheet calculates error for Current Transmitter (XTR) devices and external components.
Data sheet
XTR105
- Low unadjusted error
- Two precision current sources: 800µA each
- Linearization
- 2-wire or 3-wire RTD operation
- Low offset drift: 0.4µV/°C
- Low output current noise: 30nAPP
- High PSR: 110dB minimum
- High CMR: 86dB minimum
- Wide supply range: 7.5V to 36V
- Packages: DIP-14 and SO-14
The XTR105 is a monolithic 4mA-to-20mA, 2-wire current transmitter with two precision current sources. This device provides complete current excitation for platinum RTD temperature sensors and bridges, instrumentation amplifiers, and current output circuitry on a single integrated circuit.
Versatile linearization circuitry provides a 2nd-order correction to the RTD, typically achieving a 40:1 improvement in linearity.
Instrumentation amplifier gain can be configured for a wide range of temperature or pressure measurements. Total unadjusted error of the complete current transmitter is low enough to permit use without adjustment in many applications. This includes zero output current drift, span drift, and nonlinearity. The XTR105 operates on loop power-supply voltages down to 7.5V.
The XTR105 is available in DIP-14 and SO-14 surface-mount packages and is specified for the industrial temperature range of –40°C to +85°C.
Similar products you might be interested in
Technical documentation
No results found. Please clear your search and try again.
View all 6 | Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | XTR105 4-20mA Current Transmitter With Sensor Excitation and Linearization datasheet (Rev. C) | PDF | HTML | 17 Oct 2024 |
| Analog Design Journal | 4Q 2011 Issue Analog Applications Journal | 09 Nov 2011 | ||
| Analog Design Journal | Analog linearization of resistance temperature detectors | 09 Nov 2011 | ||
| Application note | 20mA to 0-20mA Converter & Current Summing Current-to-Current Converters | 02 Oct 2000 | ||
| Application note | FOUR-WIRE RTD CURRENT-LOOP TRANSMITTER | 27 Sep 2000 | ||
| Application note | IC Building Blocks Form Complete Isolated 4-20mA Current-Loop | 27 Sep 2000 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
DLPNIRSCANEVM — DLP® NIRscan™ Evaluation Module
The DLP NIRscan is a complete evaluation module (EVM) to design a high performance, affordable near-infrared spectrometer. This flexible tool contains everything a designer needs to start developing a DLP-based spectrometer right out of the box. The EVM features the DLP 0.45 WXGA NIR (...)
User guide: PDF
Simulation tool
PSPICE-FOR-TI — PSpice® for TI design and simulation tool
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool
TINA-TI — SPICE-based analog simulation program
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
User guide: PDF
Reference designs
TIPD161 — Analog Linearized 3-Wire PT100 RTD to 2-Wire 4-20mA Current Loop Transmitter Reference Design
This design features a single-chip solution to linearize and transmit a 3-wire PT100 RTD over the industry standard 2-wire 4-20mA current loop. The design was configured for a -200°C to 800°C temperature range, but other temperature ranges can be achieved by adjusting the (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| PDIP (N) | 14 | Ultra Librarian |
| SOIC (D) | 14 | Ultra Librarian |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.