SN74CBT3384C

Name: SN74CBT3384C
Brand: TI
SKU: SN74CBT3384C
Price: 0.231 USD

AKTIV

10-Kanal-Universal-FET-Busschalter, 3,3 V, 1:1 (SPST) mit -2-V-Unterschwingungsschutz

Jetzt bestellen

Datenblatt

document-pdfAcrobat SN74CBT3384C datasheet (Rev. A) (Englisch)

SN74CBT3384C

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Configuration

1:1 SPST

Number of channels

10

Power supply voltage - single (V)

5

Protocols

Analog

Ron (typ) (Ω)

3

CON (typ) (pF)

12.5

ON-state leakage current (max) (µA)

10

Bandwidth (MHz)

200

Operating temperature range (°C)

-40 to 85

Features

Undershoot protection

Input/output continuous current (max) (mA)

128

Rating

Catalog

Drain supply voltage (max) (V)

5.5

Supply voltage (max) (V)

5.5

Configuration

1:1 SPST

Number of channels

10

Power supply voltage - single (V)

5

Protocols

Analog

Ron (typ) (Ω)

3

CON (typ) (pF)

12.5

ON-state leakage current (max) (µA)

10

Bandwidth (MHz)

200

Operating temperature range (°C)

-40 to 85

Features

Undershoot protection

Input/output continuous current (max) (mA)

128

Rating

Catalog

Drain supply voltage (max) (V)

5.5

Supply voltage (max) (V)

5.5

SOIC (DW)

24

159.65 mm² 15.5 x 10.3

SSOP (DBQ)

24

51.9 mm² 8.65 x 6

TSSOP (PW)

24

49.92 mm² 7.8 x 6.4

TVSOP (DGV)

24

32 mm² 5 x 6.4

Undershoot Protection for Off-Isolation on A and B Ports Up to –2 V
Bidirectional Data Flow, With Near-Zero Propagation Delay
Low ON-State Resistance (r_on) Characteristics (r_on = 3 Typical)
Low Input/Output Capacitance Minimizes Loading and Signal Distortion (C_io(OFF) = 5 pF Typical)
Data and Control Inputs Provide Undershoot Clamp Diodes
Low Power Consumption (I_CC = 3 µA Max)
V_CC Operating Range From 4 V to 5.5 V
Data I/Os Support 0 to 5-V Signaling Levels (0.8-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V)
Control Inputs Can Be Driven by TTL or 5-V/3.3-V CMOS Outputs
I_off Supports Partial-Power-Down Mode Operation
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Performance Tested Per JESD 22
- 2000-V Human-Body Model (A114-B, Class II)
- 1000-V Charged-Device Model (C101)
Supports Both Digital and Analog Applications: PCI Interface, USB Interface, Memory Interleaving, Bus Isolation, Low-Distortion Signal Gating

Undershoot Protection for Off-Isolation on A and B Ports Up to –2 V
Bidirectional Data Flow, With Near-Zero Propagation Delay
Low ON-State Resistance (r_on) Characteristics (r_on = 3 Typical)
Low Input/Output Capacitance Minimizes Loading and Signal Distortion (C_io(OFF) = 5 pF Typical)
Data and Control Inputs Provide Undershoot Clamp Diodes
Low Power Consumption (I_CC = 3 µA Max)
V_CC Operating Range From 4 V to 5.5 V
Data I/Os Support 0 to 5-V Signaling Levels (0.8-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V)
Control Inputs Can Be Driven by TTL or 5-V/3.3-V CMOS Outputs
I_off Supports Partial-Power-Down Mode Operation
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Performance Tested Per JESD 22
- 2000-V Human-Body Model (A114-B, Class II)
- 1000-V Charged-Device Model (C101)
Supports Both Digital and Analog Applications: PCI Interface, USB Interface, Memory Interleaving, Bus Isolation, Low-Distortion Signal Gating

The SN74CBT3384C is a high-speed TTL-compatible FET bus switch with low ON-state resistance (r_on), allowing for minimal propagation delay. Active Undershoot-Protection Circuitry on the A and B ports of the SN74CBT3384C provides protection for undershoot up to –2 V by sensing an undershoot event and ensuring that the switch remains in the proper OFF state.

The SN74CBT3384C is organized as two 5-bit bus switches with separate output-enable (1OE\, 2OE\) inputs. It can be used as two 5-bit bus switches or as one 10-bit bus switch. When OE\ is low, the associated 5-bit bus switch is ON, and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE\ is high, the associated 5-bit bus switch is OFF, and the high-impedance state exists between the A and B ports.

This device is fully specified for partial-power-down applications using I_off. The I_off feature ensures that damaging current will not backflow through the device when it is powered down.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN74CBT3384C is a high-speed TTL-compatible FET bus switch with low ON-state resistance (r_on), allowing for minimal propagation delay. Active Undershoot-Protection Circuitry on the A and B ports of the SN74CBT3384C provides protection for undershoot up to –2 V by sensing an undershoot event and ensuring that the switch remains in the proper OFF state.

The SN74CBT3384C is organized as two 5-bit bus switches with separate output-enable (1OE\, 2OE\) inputs. It can be used as two 5-bit bus switches or as one 10-bit bus switch. When OE\ is low, the associated 5-bit bus switch is ON, and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE\ is high, the associated 5-bit bus switch is OFF, and the high-impedance state exists between the A and B ports.

This device is fully specified for partial-power-down applications using I_off. The I_off feature ensures that damaging current will not backflow through the device when it is powered down.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

filter

Andere Analogschalter und Multiplexer suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 13

	Typ	Titel		Datum
*	Data sheet	SN74CBT3384C datasheet (Rev. A)		15 Okt 2003
	Application note	Selecting the Correct Texas Instruments Signal Switch (Rev. E)	PDF \| HTML	02 Jun 2022
	Application note	Multiplexers and Signal Switches Glossary (Rev. B)	PDF \| HTML	01 Dez 2021
	Application note	CBT-C, CB3T, and CB3Q Signal-Switch Families (Rev. C)	PDF \| HTML	19 Nov 2021
	Application brief	Eliminate Power Sequencing with Powered-off Protection Signal Switches (Rev. C)	PDF \| HTML	06 Jan 2021
	Selection guide	Little Logic Guide 2018 (Rev. G)		06 Jul 2018
	Selection guide	Logic Guide (Rev. AB)		12 Jun 2017
	Application note	Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)		02 Dez 2015
	User guide	LOGIC Pocket Data Book (Rev. B)		16 Jan 2007
	More literature	Digital Bus Switch Selection Guide (Rev. A)		10 Nov 2004
	Application note	Semiconductor Packing Material Electrostatic Discharge (ESD) Protection		08 Jul 2004
	User guide	Signal Switch Data Book (Rev. A)		14 Nov 2003
	Application note	Bus FET Switch Solutions for Live Insertion Applications		07 Feb 2003

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Schnittstellenadapter

LEADED-ADAPTER1 — Oberflächenmontierbarer DIP-Header-Adapter zur schnellen Prüfung der 5-, 8-, 10-, 16- und 24-poligen

The EVM-LEADED1 board allows for quick testing and bread boarding of TI's common leaded packages. The board has footprints to convert TI's D, DBQ, DCT,DCU, DDF, DGS, DGV, and PW surface mount packages to 100mil DIP headers.

Benutzerhandbuch: PDF