Produktdetails

Number of ADC channels 2 Analog inputs 2 Digital audio interface I2S, L, TDM Control interface I2C Sampling rate (max) (kHz) 768 ADC SNR (typ) (dB) 104 Rating Catalog Analog outputs 0 Operating temperature range (°C) -40 to 105
Number of ADC channels 2 Analog inputs 2 Digital audio interface I2S, L, TDM Control interface I2C Sampling rate (max) (kHz) 768 ADC SNR (typ) (dB) 104 Rating Catalog Analog outputs 0 Operating temperature range (°C) -40 to 105
WQFN (RTE) 20 9 mm² 3 x 3
  • Multichannel high-performance ADC:
    • 2-channel analog microphones or line-in
    • 4-channel digital PDM microphones
    • Up to 2 analog and up to 2 digital microphone channels
  • ADC line and microphone differential input performance:
    • Dynamic range (DR): 104dB
    • THD+N: –95dB
  • ADC channel summing mode, DR performance:
    • 107dB, 2-channel summing
  • ADC input voltage:
    • Differential, 2VRMS full-scale inputs
    • Single-ended, 1VRMS full-scale inputs
  • ADC sample rate (fS) = 8kHz to 768kHz
  • Programmable channel settings:
    • Channel gain: 0dB to 42dB, 0.5dB steps
    • Digital volume control: –100dB to 27dB
    • Gain calibration with 0.1dB resolution
    • Phase calibration with 163ns resolution
  • Programmable microphone bias or supply voltage generation
  • Low-latency signal processing filter selection
  • Programmable HPF and biquad digital filters
  • Automatic gain controller (AGC)
  • Voice activity detection (VAD)
  • I2C control interface
  • Integrated high-performance audio PLL
  • Automatic clock divider setting configurations
  • Audio serial data interface:
    • Format: TDM, I2S, or left-justified (LJ)
    • Word length: 16 bits, 20 bits, 24 bits, or 32 bits
    • Master or slave interface
  • Single-supply operation: 3.3V or 1.8V
  • I/O-supply operation: 3.3V or 1.8V
  • Power consumption for 1.8-AVDD supply:
    • 9.5mW/channel at 48kHz sample rate
  • Multichannel high-performance ADC:
    • 2-channel analog microphones or line-in
    • 4-channel digital PDM microphones
    • Up to 2 analog and up to 2 digital microphone channels
  • ADC line and microphone differential input performance:
    • Dynamic range (DR): 104dB
    • THD+N: –95dB
  • ADC channel summing mode, DR performance:
    • 107dB, 2-channel summing
  • ADC input voltage:
    • Differential, 2VRMS full-scale inputs
    • Single-ended, 1VRMS full-scale inputs
  • ADC sample rate (fS) = 8kHz to 768kHz
  • Programmable channel settings:
    • Channel gain: 0dB to 42dB, 0.5dB steps
    • Digital volume control: –100dB to 27dB
    • Gain calibration with 0.1dB resolution
    • Phase calibration with 163ns resolution
  • Programmable microphone bias or supply voltage generation
  • Low-latency signal processing filter selection
  • Programmable HPF and biquad digital filters
  • Automatic gain controller (AGC)
  • Voice activity detection (VAD)
  • I2C control interface
  • Integrated high-performance audio PLL
  • Automatic clock divider setting configurations
  • Audio serial data interface:
    • Format: TDM, I2S, or left-justified (LJ)
    • Word length: 16 bits, 20 bits, 24 bits, or 32 bits
    • Master or slave interface
  • Single-supply operation: 3.3V or 1.8V
  • I/O-supply operation: 3.3V or 1.8V
  • Power consumption for 1.8-AVDD supply:
    • 9.5mW/channel at 48kHz sample rate

The TAA3020 is a high-performance, audio analog-to-digital converter (ADC) that supports simultaneous sampling of up to two analog channels or four digital channels for a pulse density modulation (PDM) microphone input. The device supports line and microphone inputs and allows single-ended and differential input configurations. The device allows for sample rates up to 768kHz and integrates programmable channel gain, digital volume control, a programmable microphone bias voltage, a phase-locked loop (PLL), a programmable high-pass filter (HPF), biquad filters, and low-latency filter modes. The device supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with the I2C interface. These integrated high-performance features and the ability to be powered from a single supply of 1.8V or 3.3V make the device an excellent choice for space-constrained audio systems in far-field microphone recording applications.

The TAA3020 is specified from –40°C to +105°C, and is offered in a 20-pin WQFN package.

The TAA3020 is a high-performance, audio analog-to-digital converter (ADC) that supports simultaneous sampling of up to two analog channels or four digital channels for a pulse density modulation (PDM) microphone input. The device supports line and microphone inputs and allows single-ended and differential input configurations. The device allows for sample rates up to 768kHz and integrates programmable channel gain, digital volume control, a programmable microphone bias voltage, a phase-locked loop (PLL), a programmable high-pass filter (HPF), biquad filters, and low-latency filter modes. The device supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with the I2C interface. These integrated high-performance features and the ability to be powered from a single supply of 1.8V or 3.3V make the device an excellent choice for space-constrained audio systems in far-field microphone recording applications.

The TAA3020 is specified from –40°C to +105°C, and is offered in a 20-pin WQFN package.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung
NEU TAA3040 AKTIV Vierkanaliger Analog-zu-Digital-Wandler (ADC) für den Audiobereich von Burr-Brown™ mit 768 kHz und 1 Quad-channel version.
Ähnliche Funktionalität wie verglichener Baustein
NEU PCM1809 AKTIV Audio-ADC, 32 Bit, 192 kHz, mit Stereokanal und 102 dB-SNR, ohne externe AC-Kopplungskondensatoren Pin-controlled version.

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 3
Typ Titel Datum
* Data sheet TAA3020 2-Channel, 768kHz, 104dB Dynamic Range Audio ADC datasheet PDF | HTML 02 Okt 2024
Certificate TAA3020 EU Declaration of Conformity (DoC) 02 Dez 2024
User guide TAA3020 EVM's User Guide PDF | HTML 22 Okt 2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

ADC3120EVM-PDK — TLV320ADC3120-Evaluierungsmodul für 768-kHz-Stereo-Audio-ADC von Burr-Brown™ mit 106 dB Rauschabstan

Das ADC3120EVM-PDK ist ein Evaluierungsmodul (EVM) zum Prüfen der Funktionen des TLV320ADC3120, bei dem es sich um einen hochleistungsfähigen Zweikanal-Audio-Analog-Digital-Wandler (ADC) handelt. Der TLV320ADC3120 ist für sprachgesteuerte Systeme, professionelle Mikrofone, Audiokonferenzen, (...)

Benutzerhandbuch: PDF | HTML
Entwicklungskit

TAA3020EVM-PDK — TAA3020-Produktentwicklungskit

Das TAA3020-Produktentwicklungskit (PDK) ermöglicht es dem Benutzer, die Fähigkeiten des TAA3020 von Texas Instruments zu testen, einem Hochleistungs-Audio-ADC mit Stereo-Kanal, der für Anwendungen in den Bereichen sprachaktivierte Systeme, professionelle Mikrofone, Audiokonferenzen, portable (...)

Benutzerhandbuch: PDF | HTML
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WQFN (RTE) 20 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos