Startseite Audio Audioverstärker Lautsprecherverstärker
Startseite
Audio
Audioverstärker
Lautsprecherverstärker

TAS5261

OBSOLET

Class-D-Audioverstärker mit 315 W Mono, 0 bis 52,5 V Versorgungsspannung und PWM-Eingang

Jetzt bestellen
Datenblatt
TAS5261 wird nicht mehr produziert
Dieses Produkt wird nicht mehr produziert. Neue Designs sollten ein alternatives Produkt erwägen.
open-in-new Alternativen vergleichen
Ähnliche Funktionalität wie verglichener Baustein
TPA3255 AKTIV Class-D-Audioverstärker mit Analogeingang, 315-W-Stereo, 600-W-Mono, 18 bis 53,5 V Versorgungsspannu Replacement

TAS5261

OBSOLET
Datenblatt Jetzt bestellen

Produktdetails

Audio input type PWM Architecture Class-D Speaker channels (max) 4 Rating Catalog Power stage supply (max) (V) 52.5 Power stage supply (min) (V) 0 Load (min) (Ω) 3 Output power (W) 315 SNR (dB) 110 THD + N at 1 kHz (%) 0.09 Control interface Hardware Closed/open loop Open Analog supply (min) (V) 10.8 Analog supply voltage (max) (V) 13.2 Operating temperature range (°C) 0 to 70
Audio input type PWM Architecture Class-D Speaker channels (max) 4 Rating Catalog Power stage supply (max) (V) 52.5 Power stage supply (min) (V) 0 Load (min) (Ω) 3 Output power (W) 315 SNR (dB) 110 THD + N at 1 kHz (%) 0.09 Control interface Hardware Closed/open loop Open Analog supply (min) (V) 10.8 Analog supply voltage (max) (V) 13.2 Operating temperature range (°C) 0 to 70
HSSOP (DKD) 36 225.78 mm² 15.9 x 14.2
  • Total Output Power
    • 125 W Into 8 at 10% THD+N
  • 110-dB SNR (A-Weighted with TAS5518 modulator)
  • Supports Pulse-Width Modulation (PWM) Frame Rates of 192 kHz to 384 kHz
  • Resistor-Programmable Current Limit
  • Integrated Self-Protection Circuit Including:
    • Under Voltage Protection
    • Over Temperature Warning and Error
    • Over Load Protection
    • Short Circuit (OC) Protection
    • PWM Activity Dectector
  • Power-On Reset (POR) to Eliminate System Power-Supply Sequencing
  • Thermally-Enhanced Package DKD (36-pin PSOP3)
  • EMI Compliant When Used With Recommended System Design
  • Error Reporting 3.3-V and 5-V Compliant
  • APPLICATIONS
    • AV Receivers
    • DVD Receivers
    • Mini/Micro Component Systems
    • Home Theater Systems
  • Total Output Power
    • 125 W Into 8 at 10% THD+N
  • 110-dB SNR (A-Weighted with TAS5518 modulator)
  • Supports Pulse-Width Modulation (PWM) Frame Rates of 192 kHz to 384 kHz
  • Resistor-Programmable Current Limit
  • Integrated Self-Protection Circuit Including:
    • Under Voltage Protection
    • Over Temperature Warning and Error
    • Over Load Protection
    • Short Circuit (OC) Protection
    • PWM Activity Dectector
  • Power-On Reset (POR) to Eliminate System Power-Supply Sequencing
  • Thermally-Enhanced Package DKD (36-pin PSOP3)
  • EMI Compliant When Used With Recommended System Design
  • Error Reporting 3.3-V and 5-V Compliant
  • APPLICATIONS
    • AV Receivers
    • DVD Receivers
    • Mini/Micro Component Systems
    • Home Theater Systems

The TAS5261 is a high-performance, integrated mono digital amplifier power stage designed to drive 4- speakers with low harmonic distortion. This system requires only a simple, passive demodulation filter to deliver high-quality, high-efficiency audio amplification.

The TAS5261 has complete protection circuitry integrated on chip, safeguarding the device and speakers against fault conditions that could damage the system. These protection features are short-circuit protection, overcurrent protection, undervoltage protection, and a loss of pulse-width modulation (PWM) input signal (PWM Activity Detector).

A power-on reset (POR) circuit is used to eliminate power-supply sequencing that is normally required for most H-bridge designs.

The TAS5261 is a high-performance, integrated mono digital amplifier power stage designed to drive 4- speakers with low harmonic distortion. This system requires only a simple, passive demodulation filter to deliver high-quality, high-efficiency audio amplification.

The TAS5261 has complete protection circuitry integrated on chip, safeguarding the device and speakers against fault conditions that could damage the system. These protection features are short-circuit protection, overcurrent protection, undervoltage protection, and a loss of pulse-width modulation (PWM) input signal (PWM Activity Detector).

A power-on reset (POR) circuit is used to eliminate power-supply sequencing that is normally required for most H-bridge designs.
filter Andere Lautsprecherverstärker suchen
Herunterladen

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet TAS5261 datasheet 03 Jul 2006

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort