Startseite Audio Audioverstärker Lautsprecherverstärker
Startseite
Audio
Audioverstärker
Lautsprecherverstärker

TAS5615

AKTIV

160 W-Stereo (300 W insgesamt) Klasse D-Verstärker mit Analog-Eingang und integrierter Rückkopplung

Jetzt bestellen
Datenblatt

TAS5615

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Rating Catalog Load (min) (Ω) 8 Iq (typ) (mA) 11.5 PSRR (dB) 80 Operating temperature range (°C) 0 to 70
Rating Catalog Load (min) (Ω) 8 Iq (typ) (mA) 11.5 PSRR (dB) 80 Operating temperature range (°C) 0 to 70
HSSOP (DKD) 44 225.78 mm² 15.9 x 14.2 HTQFP (PHD) 64 256 mm² 16 x 16
  • Active Enabled Integrated Feedback Provides: (PurePath™ HD Technology)
    • Signal Bandwidth up to 80 kHz for High-Frequency Content From
      High-Definition Sources
    • Ultralow 0.03% THD at 1 W into 8
    • 0.03% THD Across All Frequencies for Natural Sound at 1 W
    • 80-dB PSRR (BTL, No Input Signal)
    • >100-dB (A weighted) SNR
    • Click- and Pop-Free Start-Up
    • Minimal External Components Compared to Discrete Solutions
  • Multiple Configurations Possible on the Same PCB:
    • Mono Parallel Bridge-Tied Load (PBTL)
    • 2.1 Single-Ended (SE) Stereo Pair and Bridge-Tied Load (BTL) Subwoofer
    • Quad Single-Ended (SE) Outputs
  • Total Output Power at 10% THD+N
    • 300 W in Mono PBTL Configuration
    • 160 W per Channel in Stereo BTL
    • 80 W per Channel in Quad Single-Ended
  • High Efficiency Power Stage (> 90%) With 120 m Output MOSFETs
  • Two Thermally Enhanced Package Options:
    • PHD (64-Pin QFP)
    • DKD (44-Pin PSOP3)
  • Self-Protection Design (Including Undervoltage, Overtemperature, Clipping, and
    Short-Circuit Protection) With Error Reporting
  • EMI Compliant When Used With Recommended System Design
  • APPLICATIONS
    • Mini Combo System
    • AV Receivers
    • DVD Receivers
    • Active Speakers

(1) Achievable output power levels are dependent on the thermal configuration of the target application. A high performance thermal interface material between the package exposed heatslug and the heat sink should be used to achieve high output power levels
PurePath HD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
  • Active Enabled Integrated Feedback Provides: (PurePath™ HD Technology)
    • Signal Bandwidth up to 80 kHz for High-Frequency Content From
      High-Definition Sources
    • Ultralow 0.03% THD at 1 W into 8
    • 0.03% THD Across All Frequencies for Natural Sound at 1 W
    • 80-dB PSRR (BTL, No Input Signal)
    • >100-dB (A weighted) SNR
    • Click- and Pop-Free Start-Up
    • Minimal External Components Compared to Discrete Solutions
  • Multiple Configurations Possible on the Same PCB:
    • Mono Parallel Bridge-Tied Load (PBTL)
    • 2.1 Single-Ended (SE) Stereo Pair and Bridge-Tied Load (BTL) Subwoofer
    • Quad Single-Ended (SE) Outputs
  • Total Output Power at 10% THD+N
    • 300 W in Mono PBTL Configuration
    • 160 W per Channel in Stereo BTL
    • 80 W per Channel in Quad Single-Ended
  • High Efficiency Power Stage (> 90%) With 120 m Output MOSFETs
  • Two Thermally Enhanced Package Options:
    • PHD (64-Pin QFP)
    • DKD (44-Pin PSOP3)
  • Self-Protection Design (Including Undervoltage, Overtemperature, Clipping, and
    Short-Circuit Protection) With Error Reporting
  • EMI Compliant When Used With Recommended System Design
  • APPLICATIONS
    • Mini Combo System
    • AV Receivers
    • DVD Receivers
    • Active Speakers

(1) Achievable output power levels are dependent on the thermal configuration of the target application. A high performance thermal interface material between the package exposed heatslug and the heat sink should be used to achieve high output power levels
PurePath HD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.

The TAS5615 is a high-performance analog input class-D amplifier with integrated closed-loop feedback technology (known as PurePath™ HD technology). It has the ability to drive up to 160 W(1) stereo into 8- speakers from a single 50-V supply.

PurePath HD technology enables traditional AB-amplifier performance (<0.03% THD) levels while providing the power efficiency of traditional class-D amplifiers.

Ultralow 0.03% THD+N is flat across all frequencies, ensuring that the amplifier does not add uneven distortion characteristics, and helps maintain a natural sound.

The efficiency of this class-D amplifier is greater than 90%. Undervoltage protection, overtemperature, clipping, short-circuit and overcurrent protection are all integrated, safeguarding the device and speakers against fault conditions that could damage the system.

The TAS5615 is a high-performance analog input class-D amplifier with integrated closed-loop feedback technology (known as PurePath™ HD technology). It has the ability to drive up to 160 W(1) stereo into 8- speakers from a single 50-V supply.

PurePath HD technology enables traditional AB-amplifier performance (<0.03% THD) levels while providing the power efficiency of traditional class-D amplifiers.

Ultralow 0.03% THD+N is flat across all frequencies, ensuring that the amplifier does not add uneven distortion characteristics, and helps maintain a natural sound.

The efficiency of this class-D amplifier is greater than 90%. Undervoltage protection, overtemperature, clipping, short-circuit and overcurrent protection are all integrated, safeguarding the device and speakers against fault conditions that could damage the system.
filter Andere Lautsprecherverstärker suchen
Herunterladen

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung
TPA3221 AKTIV Class-D-Audioverstärker mit Analog-Eingang, 100 W Stereo, 200 W Mono, 7 bis 32 V Versorgungsspannung Lower minimum load and lower noise
Ähnliche Funktionalität wie verglichener Baustein
TPA3223 AKTIV Class-D-Audioverstärker mit Analog-Eingang, 200 W Stereo, 400 W Mono, 10- bis 45-V-Versorgungsspannu Higher output power

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet 160W Stereo / 300W Mono PurePath(TM) HD Analog Input Power Stage datasheet (Rev. B) 18 Feb 2010

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​