TAS5704

AKTIV

Class-D-Audioverstärker mit 20 W Stereo, 10 bis 26 V Versorgungsspannung, Digitaleingang, mit Lautsp

Jetzt bestellen

Datenblatt

document-pdfAcrobat 20-W Stereo Digital Audio Power Amplifier with Feedback datasheet (Rev. A) (Englisch)

TAS5704

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Audio input type

Digital Input

Architecture

Class-D

Speaker channels (max)

4

Rating

Catalog

Power stage supply (max) (V)

26

Power stage supply (min) (V)

10

Load (min) (Ω)

4

Output power (W)

20

SNR (dB)

100

THD + N at 1 kHz (%)

0.05

Iq (typ) (mA)

33

Control interface

Hardware

Closed/open loop

Closed

Analog supply (min) (V)

3

Analog supply voltage (max) (V)

3.6

Sampling rate (max) (kHz)

192

PSRR (dB)

60

Operating temperature range (°C)

0 to 85

Audio input type

Digital Input

Architecture

Class-D

Speaker channels (max)

4

Rating

Catalog

Power stage supply (max) (V)

26

Power stage supply (min) (V)

10

Load (min) (Ω)

4

Output power (W)

20

SNR (dB)

100

THD + N at 1 kHz (%)

0.05

Iq (typ) (mA)

33

Control interface

Hardware

Closed/open loop

Closed

Analog supply (min) (V)

3

Analog supply voltage (max) (V)

3.6

Sampling rate (max) (kHz)

192

PSRR (dB)

60

Operating temperature range (°C)

0 to 85

HTQFP (PAP)

64

144 mm² 12 x 12

Audio Input/Output
- 20-W into an 8- Load From an 18-V Supply
- Two Serial Audio Inputs (Four Audio Channels)
- Supports Multiple Output Configurations:
  - 2-Ch Bridged Outputs (20 W × 2)
  - 4-Ch Single-Ended Outputs (10 W × 4)
  - 2-Ch Single-Ended + 1-Ch Bridged (2.1) (10 W × 2 + 20 W)
Closed Loop Power Stage Architecture
- Improved PSRR Reduces Power Supply Performance Requirements
- Higher Damping Factor Provides for Tighter, More Accurate
  Sound With Improved Bass Response
- Lower EMC Emissions
- Output Power is Independent of Supply Voltage Variation
Wide PVCC Range From (10 V to 26 V)
Supports 32-kHz–192-kHz (DVD-Audio) Sample Rates (LJ/RJ/I²S)
Line-Level Subwoofer PWM Outputs
Audio/PWM Processing (Hardware Controlled)
- 4-Step Gain Control (-3dB, 3dB, 9dB, 12dB)
- Soft Mute Control (50% Output Duty Cycle)
Factory-Trimmed Internal Oscillator Enables Automatic Detection of
Incoming Sample Rates
Thermal and Short-Circuit Protection

System Two, Audio Precision are trademarks of Audio Precision, Inc.

Audio Input/Output
- 20-W into an 8- Load From an 18-V Supply
- Two Serial Audio Inputs (Four Audio Channels)
- Supports Multiple Output Configurations:
  - 2-Ch Bridged Outputs (20 W × 2)
  - 4-Ch Single-Ended Outputs (10 W × 4)
  - 2-Ch Single-Ended + 1-Ch Bridged (2.1) (10 W × 2 + 20 W)
Closed Loop Power Stage Architecture
- Improved PSRR Reduces Power Supply Performance Requirements
- Higher Damping Factor Provides for Tighter, More Accurate
  Sound With Improved Bass Response
- Lower EMC Emissions
- Output Power is Independent of Supply Voltage Variation
Wide PVCC Range From (10 V to 26 V)
Supports 32-kHz–192-kHz (DVD-Audio) Sample Rates (LJ/RJ/I²S)
Line-Level Subwoofer PWM Outputs
Audio/PWM Processing (Hardware Controlled)
- 4-Step Gain Control (-3dB, 3dB, 9dB, 12dB)
- Soft Mute Control (50% Output Duty Cycle)
Factory-Trimmed Internal Oscillator Enables Automatic Detection of
Incoming Sample Rates
Thermal and Short-Circuit Protection

System Two, Audio Precision are trademarks of Audio Precision, Inc.

The TAS5704 is a 20-W, efficient, digital audio power amplifier for driving stereo bridge-tied speakers. Two serial data inputs allow processing of up to four discrete audio channels and seamless integration to most digital audio processors accepting a wide range of input data and clock rates. A hardware configurable data path allows these channels to be routed to the internal speaker drivers or output via the subwoofer PWM outputs.

The TAS5704 is a slave-only device receiving all clocks from external sources. The TAS5704 operates at a 384-kHz switching rate for 32-, 48-, 96-, and 192-kHz data, and at a 352.8 kHz switching rate for 44.1-, 88.2-, and 176.4-kHz data. The 8× oversampling combined with the fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.

The closed-loop architecture of the TAS5704 provides several benefits. The high power supply rejection enables superior audio performance from a noisy, low cost supply. The high damping factor allows tighter control over speaker movement resulting in an improved bass response. Finally, switching edge rate control lowers EMC emissions without sacrificing audio performance.

The TAS5704 is a 20-W, efficient, digital audio power amplifier for driving stereo bridge-tied speakers. Two serial data inputs allow processing of up to four discrete audio channels and seamless integration to most digital audio processors accepting a wide range of input data and clock rates. A hardware configurable data path allows these channels to be routed to the internal speaker drivers or output via the subwoofer PWM outputs.

The TAS5704 is a slave-only device receiving all clocks from external sources. The TAS5704 operates at a 384-kHz switching rate for 32-, 48-, 96-, and 192-kHz data, and at a 352.8 kHz switching rate for 44.1-, 88.2-, and 176.4-kHz data. The 8× oversampling combined with the fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.

The closed-loop architecture of the TAS5704 provides several benefits. The high power supply rejection enables superior audio performance from a noisy, low cost supply. The high damping factor allows tighter control over speaker movement resulting in an improved bass response. Finally, switching edge rate control lowers EMC emissions without sacrificing audio performance.

filter

Andere Lautsprecherverstärker suchen

Herunterladen Video mit Transkript ansehen Video

Next Generation 20-W Stereo, 16V Closed-Loop Digital Input Audio Class-D Amplifier: TAS5760L

Next Generation 25-W Stereo, 26V Closed-Loop Digital Input Audio Class-D Amplifier: TAS5760M

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 7

	Typ	Titel	Datum
*	Data sheet	20-W Stereo Digital Audio Power Amplifier with Feedback datasheet (Rev. A)	19 Aug 2010
	Application note	Using Thermal Calculation Tools for Analog Components (Rev. A)	30 Aug 2019
	Application note	Guidelines for Measuring Audio Power Amplifier Performance (Rev. A)	26 Aug 2019
	Application note	AN-1849 An Audio Amplifier Power Supply Design (Rev. C)	27 Jun 2019
	Application note	AN-1737 Managing EMI in Class D Audio Applications (Rev. A)	01 Mai 2013
	Application note	Interfacing an I2S Device to an MSP430 Device (Rev. A)	22 Mär 2010
	EVM User's guide	TAS5704EVM - User Guide	11 Apr 2008

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
HTQFP (PAP)	64	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

TAS5704

Class-D-Audioverstärker mit 20 W Stereo, 10 bis 26 V Versorgungsspannung, Digitaleingang, mit Lautsp

TAS5704

Produktdetails

Technische Dokumentation

Design und Entwicklung

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos