TMUX136

AKTIV

1,4-pF-Durchgangskapazität, 5 V, 2:1 (SPDT), 2-Kanal-Analogschalter mit Abschaltschutz

Jetzt bestellen

Datenblatt

document-pdfAcrobat TMUX136 6-GHz, 2-Channel, 2:1 Switch, With Power-Off Isolation datasheet (Rev. E) (Englisch) PDF | HTML

TMUX136

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Configuration

2:1 SPDT

Number of channels

2

Power supply voltage - single (V)

2.5, 3.3

Protocols

Analog, I2C, I3C, LVDS, UART

Ron (typ) (Ω)

4.6

CON (typ) (pF)

1.4

ON-state leakage current (max) (µA)

2

Supply current (typ) (µA)

30

Bandwidth (MHz)

6100

Operating temperature range (°C)

-40 to 125

Features

1.8-V compatible control inputs, Powered-off protection

Input/output continuous current (max) (mA)

20

Rating

Catalog

Drain supply voltage (max) (V)

4.8

Supply voltage (max) (V)

4.8

Configuration

2:1 SPDT

Number of channels

2

Power supply voltage - single (V)

2.5, 3.3

Protocols

Analog, I2C, I3C, LVDS, UART

Ron (typ) (Ω)

4.6

CON (typ) (pF)

1.4

ON-state leakage current (max) (µA)

2

Supply current (typ) (µA)

30

Bandwidth (MHz)

6100

Operating temperature range (°C)

-40 to 125

Features

1.8-V compatible control inputs, Powered-off protection

Input/output continuous current (max) (mA)

20

Rating

Catalog

Drain supply voltage (max) (V)

4.8

Supply voltage (max) (V)

4.8

UQFN (RSE)

10

3 mm² 2 x 1.5

V CC range 2.3 V to 4.8 V
High performance switch characteristics:
- Bandwidth (–3 dB): 6.1 GHz
- R ON (typical): 5.7 Ω
- C ON (typical): 1.6 pF
Current consumption: 30 µA (typical)
Special features:
- I OFF protection prevents current leakage in Powered-Down state
- 1.8-V compatible control inputs (SEL, EN)
Flow-through pinout simplifies PCB layout
Compatible with high-speed I 3C signals
ESD performance:
- 5-kV Human Body Model (A114B, Class II)
- 1-kV Charged-Device Model (C101)
Compact 10-pin UQFN package (1.5-mm × 2-mm, 0.5-mm pitch)

V CC range 2.3 V to 4.8 V
High performance switch characteristics:
- Bandwidth (–3 dB): 6.1 GHz
- R ON (typical): 5.7 Ω
- C ON (typical): 1.6 pF
Current consumption: 30 µA (typical)
Special features:
- I OFF protection prevents current leakage in Powered-Down state
- 1.8-V compatible control inputs (SEL, EN)
Flow-through pinout simplifies PCB layout
Compatible with high-speed I 3C signals
ESD performance:
- 5-kV Human Body Model (A114B, Class II)
- 1-kV Charged-Device Model (C101)
Compact 10-pin UQFN package (1.5-mm × 2-mm, 0.5-mm pitch)

The TMUX136 device is a high performance, 6-GHz, 2-channel, 2:1 switch that will support both differential and single ended signals. The device has a wide V CC range of 2.3 V to 4.8 V and supports a power-off protection feature forcing all I/O pins to be in high-impedance mode when power is not present on the V CC pin. The select pins of TMUX136 are compatible with 1.8-V control voltage, allowing them to be directly interfaced with the General-Purpose I/O (GPIO) from low voltage processors. The flow-through pinout, where inputs and outputs are on opposite sides of the device, simplifies layout routing . This, along with the low on-resistance and low on-capacitance of the device, make the TMUX136 an optimal device for supporting switching a wide range of analog signals and digital communication protocol standards, including high-speed standards such as I 3C.

The TMUX136 comes in a small 10-pin UQFN package with only 1.5 mm × 2 mm in size, which makes it useful when PCB area is limited.

The TMUX136 device is a high performance, 6-GHz, 2-channel, 2:1 switch that will support both differential and single ended signals. The device has a wide V CC range of 2.3 V to 4.8 V and supports a power-off protection feature forcing all I/O pins to be in high-impedance mode when power is not present on the V CC pin. The select pins of TMUX136 are compatible with 1.8-V control voltage, allowing them to be directly interfaced with the General-Purpose I/O (GPIO) from low voltage processors. The flow-through pinout, where inputs and outputs are on opposite sides of the device, simplifies layout routing . This, along with the low on-resistance and low on-capacitance of the device, make the TMUX136 an optimal device for supporting switching a wide range of analog signals and digital communication protocol standards, including high-speed standards such as I 3C.

The TMUX136 comes in a small 10-pin UQFN package with only 1.5 mm × 2 mm in size, which makes it useful when PCB area is limited.

filter

Andere Analogschalter und Multiplexer suchen

Herunterladen Video mit Transkript ansehen Video

Finden Sie im Bestand auf TI.com ähnliche Produkte

Produkte mit ähnlichen Spezifikationen, sortiert nach Verfügbarkeit im TI.com-Bestand.

Jetzt anzeigen

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 9

	Typ	Titel		Datum
*	Data sheet	TMUX136 6-GHz, 2-Channel, 2:1 Switch, With Power-Off Isolation datasheet (Rev. E)	PDF \| HTML	05 Jun 2023
	Application note	Designing with Multiple Multiplexers in Series: A Guide to Cascading Multiplexers	PDF \| HTML	31 Jan 2024
	Application brief	Important Multiplexer Characteristics for I3C Applications	PDF \| HTML	27 Jul 2023
	Application brief	Best Practices: I2C Devices on an I3C Shared Bus	PDF \| HTML	30 Mär 2023
	Application brief	1.8-V Logic for Multiplexers and Signal Switches (Rev. C)	PDF \| HTML	26 Jul 2022
	Application note	Selecting the Correct Texas Instruments Signal Switch (Rev. E)	PDF \| HTML	02 Jun 2022
	Application note	Multiplexers and Signal Switches Glossary (Rev. B)	PDF \| HTML	01 Dez 2021
	Application brief	Eliminate Power Sequencing with Powered-off Protection Signal Switches (Rev. C)	PDF \| HTML	06 Jan 2021
	Application brief	Improve Stability Issues with Low Con Multiplexers (Rev. A)		10 Dez 2018

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Schnittstellenadapter

LEADLESS-ADAPTER1 — Oberflächenmontierbarer DIP-Header-Adapter zum Testen der 6-, 8-, 10-, 12-, 14-, 16- und 20-poligen

The EVM-LEADLESS1 board allows for quick testing and bread boarding of TI's common leadless packages. The board has footprints to convert TI's DRC, DTP, DQE, RBW, RGY, RSE, RSV, RSW RTE, RTJ, RUK , RUC, RUG, RUM,RUT and YZP surface mount packages to 100mil DIP headers.

Benutzerhandbuch: PDF