ホーム バッテリ管理 IC バッテリ・チャージャ IC
ホーム
バッテリ管理 IC
バッテリ・チャージャ IC
新規

BQ25190

アクティブ

昇降圧機能と DVS (ダイナミック電圧スケーリング) 降圧機能と LDO と ADC とパワー パス内蔵、I²C、1 セル、1A リニア バッテリ チャージャ

ご注文はこちら
データシート

BQ25190

アクティブ
データシート ご注文はこちら

製品詳細

Number of series cells 1 Charge current (max) (A) 1 Vin (max) (V) 25 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.65 Absolute max Vin (max) (V) 25 Control topology Linear Control interface I2C Features BAT temp thermistor monitoring (JEITA profile), Boost/Buck-Boost, Buck, IC thermal regulation, IINDPM (Input current limit), Input OVP, Power Path, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3 Rating Catalog Operating temperature range (°C) -40 to 85
Number of series cells 1 Charge current (max) (A) 1 Vin (max) (V) 25 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.65 Absolute max Vin (max) (V) 25 Control topology Linear Control interface I2C Features BAT temp thermistor monitoring (JEITA profile), Boost/Buck-Boost, Buck, IC thermal regulation, IINDPM (Input current limit), Input OVP, Power Path, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3 Rating Catalog Operating temperature range (°C) -40 to 85
DSBGA (YBG) 30 5.46 mm² 2.6 x 2.1
  • Integrated 1A power path linear battery charger
    • 3.0V to 18.0V input voltage operating range
    • Input voltage up to 25V tolerant
    • Configurable battery regulation voltage with ±0.5% accuracy from 3.5V to 4.65V in 10mV steps
    • 5mA to 1A configurable fast charge current
    • 55mΩ BATFET on-resistance
    • Up to 2.5A discharge current to support high system loads
    • Fully programmable JEITA profile for safe charging over temperature
  • Power path management for powering the system and charging the battery
    • Regulated system voltage ranging from 4.4V to 4.9V in addition to battery voltage tracking and input pass-through options
    • Configurable input current limit
    • Dynamic power path management optimizes charging from weak adapters
    • Selectable adapter or battery for system power
    • Advanced system reset mechanisms
  • Ultra-low quiescent current modes
    • 2µA battery quiescent current in battery mode
    • 15nA battery quiescent current in ship mode
  • Integrated Buck converter with I2C and GPIO programmable DVS output
    • 0.36µA quiescent current from system
    • 0.4V to 1.575V output voltage in 12.5mV steps or 0.4V to 3.6V output voltage in 25mV/50mV steps
    • Up to 600mA output current
  • Integrated Buck-boost converter with I2C programmable DVS output
    • 0.1µA quiescent current from system
    • 1.7V to 5.2V output voltage in 50mV steps
    • Up to 600mA output current for VSYS ≥ 3.0V, VBBOUT = 3.3V
  • Integrated I2C programmable LDOs (LDO1 and LDO2)
    • 25nA quiescent current
    • 0.8V to 3.6V output voltage in 50mV steps
    • Up to 200mA output current
    • LDO1 capabal of remaining on in Ship mode
    • Configurable LDO or Bypass mode
    • Dedicated input pins
  • Integrated fault protection for safety
    • Input current limit and overvoltage protection
    • Battery, integrated rail overcurrent protection
    • Battery depletion protection
    • Thermal regulation and thermal shutdown
  • Integrated 12-bit ADC to monitor input current, BATFET current, input voltage, battery voltage, battery temperature or external voltage signals
  • Integrated 1A power path linear battery charger
    • 3.0V to 18.0V input voltage operating range
    • Input voltage up to 25V tolerant
    • Configurable battery regulation voltage with ±0.5% accuracy from 3.5V to 4.65V in 10mV steps
    • 5mA to 1A configurable fast charge current
    • 55mΩ BATFET on-resistance
    • Up to 2.5A discharge current to support high system loads
    • Fully programmable JEITA profile for safe charging over temperature
  • Power path management for powering the system and charging the battery
    • Regulated system voltage ranging from 4.4V to 4.9V in addition to battery voltage tracking and input pass-through options
    • Configurable input current limit
    • Dynamic power path management optimizes charging from weak adapters
    • Selectable adapter or battery for system power
    • Advanced system reset mechanisms
  • Ultra-low quiescent current modes
    • 2µA battery quiescent current in battery mode
    • 15nA battery quiescent current in ship mode
  • Integrated Buck converter with I2C and GPIO programmable DVS output
    • 0.36µA quiescent current from system
    • 0.4V to 1.575V output voltage in 12.5mV steps or 0.4V to 3.6V output voltage in 25mV/50mV steps
    • Up to 600mA output current
  • Integrated Buck-boost converter with I2C programmable DVS output
    • 0.1µA quiescent current from system
    • 1.7V to 5.2V output voltage in 50mV steps
    • Up to 600mA output current for VSYS ≥ 3.0V, VBBOUT = 3.3V
  • Integrated I2C programmable LDOs (LDO1 and LDO2)
    • 25nA quiescent current
    • 0.8V to 3.6V output voltage in 50mV steps
    • Up to 200mA output current
    • LDO1 capabal of remaining on in Ship mode
    • Configurable LDO or Bypass mode
    • Dedicated input pins
  • Integrated fault protection for safety
    • Input current limit and overvoltage protection
    • Battery, integrated rail overcurrent protection
    • Battery depletion protection
    • Thermal regulation and thermal shutdown
  • Integrated 12-bit ADC to monitor input current, BATFET current, input voltage, battery voltage, battery temperature or external voltage signals

The BQ25190 is a highly integrated battery management unit that integrates the most commonly used functions for wearable devices: a linear charger with power path, one step-down switching converter (Buck), one buck-boost switching converter (Buck-boost), two LDOs (LDO1 and LDO2), manual reset with timer (MR) , multi-channel analog-to-digital converter (ADC), as well as four multifunctional general-purpose input/outputs (GPIO).

The integrated charger supports charge current from 5mA to 1A that enables quick and accurate charging while providing a regulated voltage to the system. The regulated system voltage (VSYS) can be configured through I2C based on the recommended operating conditions of the downstream system loads. Other operation parameters such as the input current limit, charge current, Buck converters’ output voltages, Buck-boost converters’ output voltage, and LDOs’ output voltages are also programmable through the I2C interface.

The BQ25190 features low quiescent current during operation and shutdown, which enables longer battery life.

The BQ25190 is a highly integrated battery management unit that integrates the most commonly used functions for wearable devices: a linear charger with power path, one step-down switching converter (Buck), one buck-boost switching converter (Buck-boost), two LDOs (LDO1 and LDO2), manual reset with timer (MR) , multi-channel analog-to-digital converter (ADC), as well as four multifunctional general-purpose input/outputs (GPIO).

The integrated charger supports charge current from 5mA to 1A that enables quick and accurate charging while providing a regulated voltage to the system. The regulated system voltage (VSYS) can be configured through I2C based on the recommended operating conditions of the downstream system loads. Other operation parameters such as the input current limit, charge current, Buck converters’ output voltages, Buck-boost converters’ output voltage, and LDOs’ output voltages are also programmable through the I2C interface.

The BQ25190 features low quiescent current during operation and shutdown, which enables longer battery life.

filter その他の バッテリ・チャージャ IC を検索
ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
3 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート BQ25190 I2 C Controlled 1-Cell, 1A, Linear Battery Charger with Integrated Buck-Boost, DVS Buck, LDOs, ADC, and Power Path データシート PDF | HTML 2024年 10月 3日
ユーザー・ガイド BQ25190EVM User's Guide PDF | HTML 2023年 8月 18日
証明書 BQ25190EVM EU Declaration of Conformity (DoC) 2023年 8月 7日

設計および開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

BQ25190EVM — BQ25190 の評価基板

BQ25190EVM は、統合型バッテリ充電管理 IC である BQ25190 の評価基板です。BQ25190 は、ウェアラブル デバイス向けに、リニア チャージャ、安定化済み出力、タイマ付きの手動リセット機能、シップ モード機能などのごく一般的な機能を内蔵しています。
ユーザー ガイド: PDF | HTML
TI.com で取り扱いなし
パッケージ ピン数 CAD シンボル、フットプリント、および 3D モデル
DSBGA (YBG) 30 Ultra Librarian
TI の評価品に関する標準契約約款が適用されます。

購入と品質

記載されている情報：
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 使用原材料
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報：
  • ファブの拠点
  • 組み立てを実施した拠点

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

投稿されたすべてのフォーラムトピック (英語) を表示

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ