ホーム オーディオ オーディオ・アンプ スピーカ・アンプ
ホーム
オーディオ
オーディオ・アンプ
スピーカ・アンプ

LM4671

アクティブ

外部設定可能なゲイン、2.5W、モノラル、アナログ入力 Class-D スピーカ・アンプ

ご注文はこちら
データシート

LM4671

アクティブ
データシート ご注文はこちら

製品詳細

Audio input type Analog Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Load (min) (Ω) 4 Output power (W) 2.5 SNR (dB) 93 THD + N at 1 kHz (%) 0.09 Iq (typ) (mA) 6.4 Control interface Hardware Analog supply (min) (V) 2.4 Analog supply voltage (max) (V) 5.5 PSRR (dB) 65 Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Load (min) (Ω) 4 Output power (W) 2.5 SNR (dB) 93 THD + N at 1 kHz (%) 0.09 Iq (typ) (mA) 6.4 Control interface Hardware Analog supply (min) (V) 2.4 Analog supply voltage (max) (V) 5.5 PSRR (dB) 65 Operating temperature range (°C) -40 to 85
DSBGA (YZR) 9 3.0625 mm² 1.75 x 1.75
  • No Output Filter Required for Inductive Loads
  • Externally Configurable Gain
  • Very Fast Turn On Time: 17μs (typ)
  • Minimum External Components
  • "Click and pop" Suppression Circuitry
  • Micro-Power Shutdown Mode
  • Available in Space-Saving DSBGA Package

Key Specifications

  • Efficiency @ 3.6V, 100mW into 8Ω Speaker: 80 % (typ)
  • Efficiency @ 3.6V, 400mW into 8Ω Speaker: 88 % (typ)
  • Efficiency @ 5V, 1W into 8Ω Speaker: 86 % (typ)
  • Quiescent Current, 3.6V Supply: 2.8 mA (typ)
  • Total Shutdown Power Supply Current: 0.01 µA (typ)
  • Single Supply Range: 2.4 to 5.5 V

All trademarks are the property of their respective owners.

  • No Output Filter Required for Inductive Loads
  • Externally Configurable Gain
  • Very Fast Turn On Time: 17μs (typ)
  • Minimum External Components
  • "Click and pop" Suppression Circuitry
  • Micro-Power Shutdown Mode
  • Available in Space-Saving DSBGA Package

Key Specifications

  • Efficiency @ 3.6V, 100mW into 8Ω Speaker: 80 % (typ)
  • Efficiency @ 3.6V, 400mW into 8Ω Speaker: 88 % (typ)
  • Efficiency @ 5V, 1W into 8Ω Speaker: 86 % (typ)
  • Quiescent Current, 3.6V Supply: 2.8 mA (typ)
  • Total Shutdown Power Supply Current: 0.01 µA (typ)
  • Single Supply Range: 2.4 to 5.5 V

All trademarks are the property of their respective owners.

The LM4671 is a single supply, high efficiency 2.5W switching audio amplifier. A low noise, filterless PWM architecture eliminates the output filter, reducing external component count, board area consumption, system cost, and simplifying design.

The LM4671 is designed to meet the demands of mobile phones and other portable communication devices. Operating on a single 5V supply, it is capable of driving a 4Ω speaker load at a continuous average output of 2.1W with less than 1% THD+N. Its flexible power supply requirements allow operation from 2.4V to 5.5V.

The LM4671 has high efficiency with speaker loads compared to a typical Class AB amplifier. With a 3V supply driving an 8Ω speaker, the IC's efficiency for a 100mW power level is 80%, reaching 88% at 400mW output power.

The LM4671 features a low-power consumption shutdown mode. Shutdown may be enabled by driving the Shutdown pin to a logic low (GND).

The gain of the LM4671 is externally configurable which allows independent gain control from multiple sources by summing the signals.

The LM4671 is a single supply, high efficiency 2.5W switching audio amplifier. A low noise, filterless PWM architecture eliminates the output filter, reducing external component count, board area consumption, system cost, and simplifying design.

The LM4671 is designed to meet the demands of mobile phones and other portable communication devices. Operating on a single 5V supply, it is capable of driving a 4Ω speaker load at a continuous average output of 2.1W with less than 1% THD+N. Its flexible power supply requirements allow operation from 2.4V to 5.5V.

The LM4671 has high efficiency with speaker loads compared to a typical Class AB amplifier. With a 3V supply driving an 8Ω speaker, the IC's efficiency for a 100mW power level is 80%, reaching 88% at 400mW output power.

The LM4671 features a low-power consumption shutdown mode. Shutdown may be enabled by driving the Shutdown pin to a logic low (GND).

The gain of the LM4671 is externally configurable which allows independent gain control from multiple sources by summing the signals.
filter その他の スピーカ・アンプ を検索
ダウンロード

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
1 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート LM4671 Filterless High Efficiency 2.5W Switching Audio Amplifier データシート (Rev. D) 2013年 5月 2日

購入と品質

記載されている情報：
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 使用原材料
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報：
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

投稿されたすべてのフォーラムトピック (英語) を表示

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​