LOG300
- Input range:
- LNA + log detector: 7µVP to 200mVP
- Log detector: 20µVP to 1.6VP
- Adjustable output to input slope and response time.
- Dynamic range: 98dB with log conformance error (LCE) = ±1dB
- Signal detection up to 40MHz; even higher with reduced LCE
- Input frequency detection, zero cross detect
- Supply: 3V to 5.25V
The LOG300 is an integrated Analog Front End (AFE) consisting of low-noise amplifier (LNA) and a Log Detector block. This device supports an input frequency range of up-to 40MHz and a typical dynamic range of 98dB. The LOG300 is intended for use in applications that require a wide dynamic range of voltage and signal measurement. The Log Detector block of LOG300 supports both single-ended and differential inputs. The low input noise of the integrated LNA, allows measurement of signals as low as 7µVP. The transient output response can be adjusted by tuning the capacitor connected at the Log_Out pin. The integrated frequency detect feature of LOG300 enables users to extract input signal frequency and zero-crossing information.
The LOG300 is available in a 16-pin SOIC and 16-pin VQFN package. The LOG300 is operational from a 3V to 5.25V supply and over the full ambient temperature range of –40°C to +125°C.
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | LOG300 40MHz, Logarithmic Detector With Integrated Low-Noise Amplifier データシート (Rev. A) | 2024年 10月 16日 | |||
アプリケーション・ノート | Ultrasonic Sensing Using LOG Detector Amplifier | PDF | HTML | 2024年 10月 1日 | |||
証明書 | LOG300DEVM EU Declaration of Conformity (DoC) | 2024年 9月 24日 |
設計および開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
LOG300DEVM — LOG300D の評価基板
LOG300D は、16 ピン SOIC パッケージに封止した LOG300 アンプの評価基板 (EVM) です。この評価基板は、アンプの機能と汎用性を迅速かつ容易にデモできる設計を採用しています。複数のオンボード コネクタを使用して、この評価基板 (EVM) を電源、信号源、テスト機器にすぐに接続することができます。この評価基板 (EVM) の入力端子を、50Ω の一般的なラボ用機器に容易に接続できるように構成した状態で出荷します。出力は 1 個の SMA コネクタに接続済みです。また、この基板は複数のジャンパも搭載しており、IC の LNA (...)
PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®
設計とシミュレーション向けの環境である PSpice for TI (...)
TINA-TI — SPICE ベースのアナログ・シミュレーション・プログラム
TINA-TI をインストールするには、約 500MB が必要です。インストールは簡単です。必要に応じてアンインストールも可能です。(そのようなことはないと思いますが)
TINA は DesignSoft (...)
パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
---|---|---|
SOIC (D) | 16 | Ultra Librarian |
VQFN (RGT) | 16 | Ultra Librarian |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 使用原材料
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点