The TPS54821 in thermally enhanced 3.5 mm × 3.5 mm QFN package is a full featured 17 V, 8 A synchronous step down converter which is optimized for small designs through high efficiency and integrating the high-side and low-side MOSFETs. Further space savings are achieved through current mode control, which reduces component count, and by selecting a high switching frequency, reducing the inductor's footprint.
The output voltage startup ramp is controlled by the SS/TR pin which allows operation as either a stand alone power supply or in tracking situations. Power sequencing is also possible by correctly configuring the enable and the open drain power good pins.
Cycle by cycle current limiting on the high-side FET protects the device in overload situations and is enhanced by a low-side sourcing current limit which prevents current runaway. There is also a low-side sinking current limit which turns off the low-side MOSFET to prevent excessive reverse current. Hiccup protection will be triggered if the overcurrent condition has persisted for longer than the preset time. Thermal hiccup protection disables the device when the die temperature exceeds the thermal shutdown temperature and enables the part again after the built-in thermal shutdown hiccup time.
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS54821 4.5 V to 17 V Input, 8 A Synchronous Step Down Converter With Hiccup datasheet (Rev. B) | PDF | HTML | 2016/02/10 |
| Application note | Peak Current Mode Converter Secondary Stage Filter Design for Low Ripple Power – Part I: Filter Design for Out | PDF | HTML | 2024/02/27 | |
| Application note | Peak Current Mode Converter Secondary Stage Filter Design for Low Ripple Power – Part II: Hybrid Sense Network | PDF | HTML | 2024/02/27 | |
| EVM User's guide | TPS54821 Step-Down Converter Evaluation Module User's Guide (Rev. A) | PDF | HTML | 2021/08/20 | |
| Application note | How to Design a Simple and Highly Integrated Battery Testing System (Rev. B) | 2019/04/02 | ||
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018/06/25 | ||
| More literature | Common Mistakes in DC/DC Converters and How to Fix Them | 2018/02/14 |
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RHL) | 14 | Ultra Librarian |