首頁 電池管理 IC 電池充電器 IC
首頁
電池管理 IC
電池充電器 IC

BQ25910

現行

適用並聯充電應用的 I2C 1cell 6A 三級降壓電池充電器

立即訂購
產品規格表

BQ25910

現行
產品規格表 立即訂購

產品詳細資料

Number of series cells 1 Charge current (max) (A) 6 Vin (max) (V) 14 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.775 Absolute max Vin (max) (V) 20 Control topology Switch-Mode Buck Control interface I2C Features IC thermal regulation, IINDPM (Input current limit), Input OVP, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3.9 Rating Catalog Operating temperature range (°C) -40 to 85
Number of series cells 1 Charge current (max) (A) 6 Vin (max) (V) 14 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Battery charge voltage (min) (V) 3.5 Battery charge voltage (max) (V) 4.775 Absolute max Vin (max) (V) 20 Control topology Switch-Mode Buck Control interface I2C Features IC thermal regulation, IINDPM (Input current limit), Input OVP, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3.9 Rating Catalog Operating temperature range (°C) -40 to 85
DSBGA (YFF) 36 1.4000000000000001 mm² 1 x 1.4000000000000001
  • Parallel charger operation provides fast charging in dual charger configuration
  • High efficiency 750-kHz switch mode three-level buck parallel charger
    • Reduced ripple to support low profile inductor
    • 95.4% Charge efficiency at 1.5 A from 5-V input
    • 93.3% Charge efficiency at 3 A from 9-V input
    • Superior efficiency compared to traditional buck converter in compact form factor
  • Single Input to support USB input and adjustable high voltage adapters
    • Support 3.9-V to 14-V input voltage range with 20-V absolute maximum input voltage rating
    • Input current limit (500 mA to 3.6 A with 100-mA resolution) to support USB2.0 and USB 3.0 standard and high voltage adaptors
    • Maximum power tracking by input voltage limit (VINDPM) up to 14 V
  • Flexible I2C mode for optimal system performance
  • High integration includes all MOSFETs, current sensing and loop compensation
    • Lossless charge current sensing without sense resistor
  • < 10-µA Low battery leakage current during stand-by mode
  • High accuracy
    • ±0.4% Charge voltage regulation
    • ±10% Charge current regulation
    • ±7.5% Input current regulation
    • Remote differential battery sensing
  • Safety
    • Thermal regulation and thermal shutdown
    • Input UVLO and overvoltage protection
    • Battery OVP
    • Input dynamic power management (DPM)
    • Charging safety timer
    • Flying capacitor short circuit protection
    • Output voltage short circuit protection
  • Available in 36-ball WCSP package
  • Parallel charger operation provides fast charging in dual charger configuration
  • High efficiency 750-kHz switch mode three-level buck parallel charger
    • Reduced ripple to support low profile inductor
    • 95.4% Charge efficiency at 1.5 A from 5-V input
    • 93.3% Charge efficiency at 3 A from 9-V input
    • Superior efficiency compared to traditional buck converter in compact form factor
  • Single Input to support USB input and adjustable high voltage adapters
    • Support 3.9-V to 14-V input voltage range with 20-V absolute maximum input voltage rating
    • Input current limit (500 mA to 3.6 A with 100-mA resolution) to support USB2.0 and USB 3.0 standard and high voltage adaptors
    • Maximum power tracking by input voltage limit (VINDPM) up to 14 V
  • Flexible I2C mode for optimal system performance
  • High integration includes all MOSFETs, current sensing and loop compensation
    • Lossless charge current sensing without sense resistor
  • < 10-µA Low battery leakage current during stand-by mode
  • High accuracy
    • ±0.4% Charge voltage regulation
    • ±10% Charge current regulation
    • ±7.5% Input current regulation
    • Remote differential battery sensing
  • Safety
    • Thermal regulation and thermal shutdown
    • Input UVLO and overvoltage protection
    • Battery OVP
    • Input dynamic power management (DPM)
    • Charging safety timer
    • Flying capacitor short circuit protection
    • Output voltage short circuit protection
  • Available in 36-ball WCSP package

The BQ25910 is an integrated three-level switch-mode parallel battery charge management device for single cell Li-ion and Li-polymer batteries. Utilization of the three-level converter maintains highest switch-mode operation efficiency while reducing solution footprint and increasing power density. The device supports fast charging with high input voltage for a wide range of portable devices. The solution integrates reverse-blocking FET (QBLK), and four switching FETs (QHSA, QHSB, QLSB, QLSA). The I2C serial interface with charging and system settings makes the device a truly flexible solution.

The BQ25910 is an integrated three-level switch-mode parallel battery charge management device for single cell Li-ion and Li-polymer batteries. Utilization of the three-level converter maintains highest switch-mode operation efficiency while reducing solution footprint and increasing power density. The device supports fast charging with high input voltage for a wide range of portable devices. The solution integrates reverse-blocking FET (QBLK), and four switching FETs (QHSA, QHSB, QLSB, QLSA). The I2C serial interface with charging and system settings makes the device a truly flexible solution.
filter 尋找其它 電池充電器 IC
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet BQ25910 I2C Controlled 6-A Three-Level Switch Mode, Single-Cell Parallel Battery Charger for Fast Charging datasheet (Rev. B) PDF | HTML 2019年 7月 29日
Technical article How to increase charging current while shrinking overall solution size for portabl PDF | HTML 2018年 3月 1日
EVM User's guide bq25910EVM-854 Evaluation Module User's Guide (Rev. A) 2018年 3月 1日
Analog Design Journal Faster, cooler charging with dual chargers 2015年 10月 30日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

BQ25910EVM-854 — 適用於三級單節電池從屬充電器的 bq25910 評估模組

The bq25910 is an integrated three-level switch-mode slave battery charge management device for single cell Li-ion and Li-polymer batteries. Utilization of the three-level converter reduces solution footprint and volume while maintaining highest switch-mode operation efficiency.
使用指南: PDF
TI.com 無法提供
計算工具

SLVC715 — bq25910 Calculation Tool

支援產品和硬體

支援產品和硬體

產品
電池充電器 IC
BQ25910 — 適用並聯充電應用的 I2C 1cell 6A 三級降壓電池充電器
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DSBGA (YFF) 36 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片