首頁 隔離 數位隔離器
首頁
隔離
數位隔離器

ISO6721

現行

通用型雙通道 1/1 數位隔離器

立即訂購
產品規格表

ISO6721

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Integrated isolated power No Isolation rating Basic Number of channels 2 Forward/reverse channels 1 forward / 1 reverse Default output High, Low Data rate (max) (Mbps) 50 Surge isolation voltage (VIOSM) (VPK) 6500 Transient isolation voltage (VIOTM) (VPK) 4242 Withstand isolation voltage (VISO) (Vrms) 3000 CMTI (min) (V/µs) 100000 Operating temperature range (°C) -40 to 125 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 1.71 Propagation delay time (typ) (µs) 0.011 Current consumption per channel (DC) (typ) (mA) 1.2 Current consumption per channel (1 Mbps) (typ) (mA) 1.8 Creepage (min) (mm) 4 Clearance (min) (mm) 4 TI functional safety category Functional Safety-Capable
Rating Catalog Integrated isolated power No Isolation rating Basic Number of channels 2 Forward/reverse channels 1 forward / 1 reverse Default output High, Low Data rate (max) (Mbps) 50 Surge isolation voltage (VIOSM) (VPK) 6500 Transient isolation voltage (VIOTM) (VPK) 4242 Withstand isolation voltage (VISO) (Vrms) 3000 CMTI (min) (V/µs) 100000 Operating temperature range (°C) -40 to 125 Supply voltage (max) (V) 5.5 Supply voltage (min) (V) 1.71 Propagation delay time (typ) (µs) 0.011 Current consumption per channel (DC) (typ) (mA) 1.2 Current consumption per channel (1 Mbps) (typ) (mA) 1.8 Creepage (min) (mm) 4 Clearance (min) (mm) 4 TI functional safety category Functional Safety-Capable
SOIC (D) 8 29.4 mm² 4.9 x 6
  • Functional Safety-Capable
    • Documentation available to aid functional safety system design: ISO6720, ISO6721
  • 50-Mbps data rate
  • Robust isolation barrier:
    • High lifetime at 450 VRMS working voltage
    • Up to 3000 VRMS isolation rating
    • ±150 kV/µs typical CMTI
  • Wide supply range: 1.71 V to 1.89 V and 2.25 V to 5.5 V
  • 1.71-V to 5.5-V level translation
  • Default output High (ISO672xB) and Low (ISO672xFB) Options
  • Wide temperature range: –40°C to +125°C
  • 1.8 mA per channel typical at 1 Mbps
  • Low propagation delay: 11 ns typical
  • Robust electromagnetic compatibility (EMC)
    • System-Level ESD, EFT, and surge immunity
    • ±8 kV IEC 61000-4-2 contact discharge protection across isolation barrier
    • Low emissions
  • Narrow-SOIC (D-8) package
  • Safety-Related Certifications:
    • DIN EN IEC 60747-17 (VDE 0884-17)
    • UL 1577 component recognition program
    • IEC 62368-1, IEC 61010-1, IEC 60601-1
    • GB 4943.1
  • Functional Safety-Capable
    • Documentation available to aid functional safety system design: ISO6720, ISO6721
  • 50-Mbps data rate
  • Robust isolation barrier:
    • High lifetime at 450 VRMS working voltage
    • Up to 3000 VRMS isolation rating
    • ±150 kV/µs typical CMTI
  • Wide supply range: 1.71 V to 1.89 V and 2.25 V to 5.5 V
  • 1.71-V to 5.5-V level translation
  • Default output High (ISO672xB) and Low (ISO672xFB) Options
  • Wide temperature range: –40°C to +125°C
  • 1.8 mA per channel typical at 1 Mbps
  • Low propagation delay: 11 ns typical
  • Robust electromagnetic compatibility (EMC)
    • System-Level ESD, EFT, and surge immunity
    • ±8 kV IEC 61000-4-2 contact discharge protection across isolation barrier
    • Low emissions
  • Narrow-SOIC (D-8) package
  • Safety-Related Certifications:
    • DIN EN IEC 60747-17 (VDE 0884-17)
    • UL 1577 component recognition program
    • IEC 62368-1, IEC 61010-1, IEC 60601-1
    • GB 4943.1

The ISO672xB devices are high-performance, dual-channel digital isolators ideal for cost sensitive applications requiring up to 3000 VRMS (D package) isolation ratings per UL 1577. These devices are also certified by VDE, TUV, CSA, and CQC.

The ISO672xB devices provide high electromagnetic immunity and low emissions at low power consumption, while isolating CMOS or LVCMOS digital I/Os. Each isolation channel has a logic input and output buffer separated by TI’s double capacitive silicon dioxide (SiO2) insulation barrier. The ISO6720B device has 2 isolation channels with both channels in the same direction. The ISO6721B device has 2 isolation channels with 1 channel in each direction. In the event of input power or signal loss, the default output is high for devices without suffix F and low for devices with suffix F. See Device Functional Modes section for further details.

Used in conjunction with isolated power supplies, these devices help prevent noise currents on data buses, such as UART, SPI, RS-485, RS-232, and CAN from damaging sensitive circuitry. Through innovative chip design and layout techniques, the electromagnetic compatibility of the ISO672xB devices has been significantly enhanced to ease system-level ESD, EFT, surge, and emissions compliance. The ISO672xB family of devices is available in a 8-pin SOIC narrow-body (D) package and is a pin-to-pin upgrade to the older generations. For reinforced isolation requirements, refer to the ISO672x-Q1.

The ISO672xB devices are high-performance, dual-channel digital isolators ideal for cost sensitive applications requiring up to 3000 VRMS (D package) isolation ratings per UL 1577. These devices are also certified by VDE, TUV, CSA, and CQC.

The ISO672xB devices provide high electromagnetic immunity and low emissions at low power consumption, while isolating CMOS or LVCMOS digital I/Os. Each isolation channel has a logic input and output buffer separated by TI’s double capacitive silicon dioxide (SiO2) insulation barrier. The ISO6720B device has 2 isolation channels with both channels in the same direction. The ISO6721B device has 2 isolation channels with 1 channel in each direction. In the event of input power or signal loss, the default output is high for devices without suffix F and low for devices with suffix F. See Device Functional Modes section for further details.

Used in conjunction with isolated power supplies, these devices help prevent noise currents on data buses, such as UART, SPI, RS-485, RS-232, and CAN from damaging sensitive circuitry. Through innovative chip design and layout techniques, the electromagnetic compatibility of the ISO672xB devices has been significantly enhanced to ease system-level ESD, EFT, surge, and emissions compliance. The ISO672xB family of devices is available in a 8-pin SOIC narrow-body (D) package and is a pin-to-pin upgrade to the older generations. For reinforced isolation requirements, refer to the ISO672x-Q1.
filter 尋找其它 數位隔離器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
可直接投入的替代產品，相較於所比較的裝置，具備升級功能
ISO6721R 現行 通用、雙通道、1/1 反向針腳配置數位隔離器 Pin-to-pin device with opposite channel directions.
ISO7721 現行 耐用 EMC、雙通道、1/1、強化型數位隔離器 Pin-to-pin upgrade with higher performance
功能與所比較的裝置相似
ISO6521 現行 100-V 隔離雙通道 1/1 數位隔離器 For functional isolation with smaller package

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 18
類型 標題 日期
* Data sheet ISO672x General Purpose Basic Dual-Channel Digital Isolators with Robust EMC datasheet (Rev. F) PDF | HTML 2023年 1月 4日
Certificate VDE Certificate for Reinforced Isolation for DIN EN IEC 60747-17 (Rev. S) 2024年 2月 29日
Certificate VDE Certificate for Basic Isolation for DIN EN IEC 60747-17 (Rev. W) 2024年 1月 31日
White paper Improve Your System Performance by Replacing Optocouplers with Digital Isolators (Rev. C) PDF | HTML 2023年 9月 7日
Certificate CSA Certificate for ISO672xDWV 2023年 3月 15日
Certificate CSA Certificate for ISO672xD 2023年 3月 14日
Certificate CQC Certificate for ISOxxD (Rev. A) 2023年 2月 7日
Certificate CQC Certificate for ISOxxDWV (Rev. A) 2023年 2月 7日
Certificate TUV Certificate for Isolation Devices (Rev. K) 2022年 8月 5日
Certificate UL Certificate of Compliance File E181974 Vol 4 Sec 6 (Rev. P) 2022年 8月 5日
White paper Why are Digital Isolators Certified to Meet Electrical Equipment Standards? 2021年 11月 16日
White paper Distance Through Insulation: How Digital Isolators Meet Certification Requiremen PDF | HTML 2021年 6月 11日
Application brief How to Replace Optocouplers with Digital Isolators in Standard Interface Circuit (Rev. A) PDF | HTML 2021年 5月 19日
Functional safety information ISO6721/ISO6721-Q1 Functional Safety FIT Rate, FMD and Pin FMA 2021年 3月 19日
EVM User's guide Universal Digital Isolator Evaluation Module PDF | HTML 2021年 3月 4日
Certificate ISO6721DEVM EU Declaration of Conformity (DoC) 2020年 7月 31日
EVM User's guide ISO672x Dual-Channel Digital Isolator Evaluation Module PDF | HTML 2020年 7月 12日
Technical article Top 9 design questions about digital isolators PDF | HTML 2019年 2月 4日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DIGI-ISO-EVM — 通用數位隔離器評估模組

DIGI-ISO-EVM 是一款評估模組 (EVM)，可評估任何 TI 單通道、雙通道、三通道、四通道或六通道數位隔離器裝置，並提供五種不同封裝 - 8 接腳窄體 SOIC (D)、8 接腳寬體 SOIC (DWV)、16 接腳寬體 SOIC (DWW)、16 接腳超寬體 SOIC (DWW) 和 16 接腳 (DBQ) 封裝。EVM 具備足夠 Berg 接腳選項，可用於評估具最少外部零組件的裝置。

使用指南: PDF | HTML
TI.com 無法提供
開發板

ISO6721DEVM — ISO672x 通用雙通道數位隔離器評估模組

ISO6721DEVM is an evaluation module used to evaluate the low speed, general purpose, robust EMC dual channel digital isolator ISO6721 in 8-Pin SOIC package (package code D). The EVM features enough test points and jumper options for one to evaluate the device with minimal external components.
使用指南: PDF | HTML
TI.com 無法提供
模擬型號

ISO6721 PSpice Transient Model

SLLM468.ZIP (413 KB) - PSpice Model
下載
模擬型號

ISO6721 IBIS Model (Rev. A)

SLLM456A.ZIP (80 KB) - IBIS Model
下載
參考設計

TIDA-010257 — 10kW Vienna rectifier-based, three-phase power factor correction reference design

The Vienna rectifier power topology is used in high-power, three-phase power factor correction applications such as appliances, electric vehicle (EV) chargers, and telecom rectifiers. Control design of the rectifier can be complex. This reference design illustrates a method to control the power (...)
Design guide: PDF
參考設計

TIDA-010250 — 1kW 無刷 DC 馬達逆變器參考設計

此參考設計闡明了採用 MSPM0G (Arm® Cortex®-M0+ 核心微控制器) 的馬達逆變器。此設計不僅支援 1-3 分流電阻器的無感測器磁場定向控制 (FOC) 演算法，也支援具霍爾或相位差編碼器介面 (QEI) 感測器馬達驅動演算法。此參考設計提供的軟硬體皆經過測試且隨時可用，有助於加快開發至上市時間。
Design guide: PDF
參考設計

TIDA-010273 — 250W 馬達逆變器參考設計

此參考設計為用於主要電器或類似應用的 250W 馬達驅動器，設計中呈現無散熱器的 GaN IPM DRV7308 架構高效率馬達逆變器，還展示了具有 UCC28911 的低待機功耗設計。此參考設計展示透過具有 FAST™ 軟體編碼器或 eSMO 的三相 PMSM 來實作無感測器 FOC 控制的方法。此參考設計採用模組化設計，在同一個主機板上同時支援 C2000™ MCU 和 MSPM0 系列微控制器子板。此參考設計提供的軟硬體皆經過測試且隨時可用，有助於加快開發至上市時間。設計詳細資訊和測試結果可在此設計指南中找到。
Design guide: PDF
參考設計

TIDA-010265 — 採用 C2000™ MCU 和 MSPM0 的 750W 馬達逆變器參考設計

此參考設計是用於洗衣機或類似設備的 750W 馬達驅動器，展示了一種使用磁通、角度、速度和扭矩觀察器 (FAST) 軟體編碼器或增強型滑動模式觀察器 (eSMO) 實現三相永磁同步馬達 (PMSM) 的無感測器磁場定向控制 (FOC) 的方法。此參考設計採用模組化設計，可在同一主機板上同時支援 C2000™ 微控制器 (MCU) 和 MSPM0 MCU 子板。此參考設計提供的軟硬體皆經過測試且隨時可用，有助於加快開發至上市時間。硬體設計詳細資訊和測試結果可在設計指南中找到。

MathWorks (...)

Design guide: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (D) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片