SN54F74
- Package Options Include Plastic Small-Outline Packages, Ceramic Chip Carriers, and Standard Plastic and Ceramic 300-mil DIPs
These devices contain two independent positive-edge-triggered
D-type flip-flops. A low level at the preset (
) or clear (
) inputs sets or resets the outputs
regardless of the levels of the other inputs. When and are inactive (high), data at the
data (D) input meeting the setup time requirements is transferred to
the outputs on the positive-going edge of the clock pulse. Clock
triggering occurs at a voltage level and is not directly related to
the rise time of the clock pulse. Following the hold-time interval,
data at the D input may be changed without affecting the levels at
the outputs.
The SN54F74 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74F74 is characterized for operation from 0°C to 70°C.
The output levels are not guaranteed to meet the minimum
levels for VOH. Furthermore, this configuration is
nonstable; that is, it will not persist when or returns to its inactive (high) level.
您可能會感興趣的類似產品
功能相同，但引腳輸出與所比較的裝置不同
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear And Preset datasheet (Rev. A) | 1993年 10月 1日 | |
| * | SMD | SN54F74 SMD 5962-97592 | 2016年 6月 21日 | |
| Application note | Power-Up Behavior of Clocked Devices (Rev. B) | PDF | HTML | 2022年 12月 15日 | |
| Selection guide | Logic Guide (Rev. AB) | 2017年 6月 12日 | ||
| Application note | Understanding and Interpreting Standard-Logic Data Sheets (Rev. C) | 2015年 12月 2日 | ||
| User guide | LOGIC Pocket Data Book (Rev. B) | 2007年 1月 16日 | ||
| Application note | Semiconductor Packing Material Electrostatic Discharge (ESD) Protection | 2004年 7月 8日 | ||
| Application note | TI IBIS File Creation, Validation, and Distribution Processes | 2002年 8月 29日 | ||
| Application note | Bus-Interface Devices With Output-Damping Resistors Or Reduced-Drive Outputs (Rev. A) | 1997年 8月 1日 | ||
| Application note | Designing With Logic (Rev. C) | 1997年 6月 1日 | ||
| Application note | Input and Output Characteristics of Digital Integrated Circuits | 1996年 10月 1日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| CDIP (J) | 14 | Ultra Librarian |
| CFP (W) | 14 | Ultra Librarian |
| LCCC (FK) | 20 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點